Dean L. Palmer

The Palomar Testbed Interferometer

The Palomar Testbed Interferometer (PTI) is a long-baseline infrared interferometer located at Palomar Observatory, California. It was built as a testbed for interferometric techniques applicable to the Keck Interferometer. First fringes were obtained in 1995 July. PTI implements a dual-star architecture, tracking two stars simultaneously for phase referencing and narrow-angle astrometry. The three fixed 40 cm apertures can be combined pairwise to provide baselines to 110 m. The interferometer actively tracks the white-light fringe using an array detector at 2.2 μm and active delay lines with a range of ±38 m. Laser metrology of the delay lines allows for servo control, and laser metrology of the complete optical path enables narrow-angle astrometric measurements. The instrument is highly automated, using a multiprocessing computer system for instrument control and sequencing.

Observations of DG Tauri with the Keck Interferometer

We present the first science results from the Keck Interferometer, a direct-detection infrared interferometer utilizing the two 10 m Keck telescopes. The instrument and system components are briefly described. We then present observations of the T Tauri object DG Tau, which is resolved by the interferometer. The resolved component has a radius of 0.12-0.24 AU, depending on the assumed stellar and extended component fluxes and the model geometry used. Possible origins and implications of the resolved emission are discussed.

Keck Interferometer Nuller Data Reduction and On-Sky Performance

We describe the Keck Interferometer nuller theory of operation, data reduction, and on-sky performance, particularly as it applies to the nuller exozodiacal dust key science program that was carried out between 2008 February and 2009 January. We review the nuller implementation, including the detailed phasor processing involved in implementing the null-peak mode used for science data and the sequencing used for science observing. We then describe the Level 1 reduction to convert the instrument telemetry streams to raw null leakages, and the Level 2 reduction to provide calibrated null leakages. The Level 1 reduction uses conservative, primarily linear processing, implemented consistently for science and calibrator stars. The Level 2 processing is more flexible, and uses diameters for the calibrator stars measured contemporaneously with the interferometer’s K-band cophasing system in order to provide the requisite accuracy. Using the key science data set of 462 total scans, we assess the instrument performance for sensitivity and systematic error. At 2.0 Jy we achieve a photometrically-limited null leakage uncertainty of 0.25% rms per 10 minutes of integration time in our broadband channel. From analysis of the Level 2 reductions, we estimate a systematic noise floor for bright stars of ~0.2% rms null leakage uncertainty per observing cluster in the broadband channel. A similar analysis is performed for the narrowband channels. We also provide additional information needed for science reduction, including details on the instrument beam pattern and the basic astrophysical response of the system, and references to the data reduction and modeling tools.

Performance and verification of the Keck Interferometer fringe detection and tracking system

The fringe detection and tracking system of the Keck Interferometer, Fatcat, has been operational ever since first fringes at Keck, albeit not in full capacity. At present it supports single baseline (Keck-Keck) operations only. We briefly discuss the instrument design from a hardware and controls standpoint. We also show some recent data from the instrument and summarize some performance limits.

First tip-tilt correction with the Palomar 200-in. adaptive optics system

During the nights of 18-22 March 1998, the Palomar 200 adaptive optics (AO) breathed its first breathe of life, closing lock on a natural guide star for the first time. We present telescope result obtained during the initial closed- loop tip/tilt test of the AO system at the 5m Hale Telescope on Palomar Mountain. (PHARO). Early tip/tilt correction result demonstrate a factor of approximately 1.3 improvement in peak IR irradiance for several second exposures. The facility AO and PHARO systems are scheduled for a series of engineering runs throughout 1998. Initial closure of the 241 actuator high order natural guide star adaptive loop is expected this summer.

Initial test results from the Palomar 200-in. adaptive optics system

We present laboratory subsystem test results obtained during integration of the Palomar 200” Adaptive Optics System at Jet Propulsion Laboratory. These results pertain to the 241 actively controlled actuator, Shack-Hartmann sensed, initial delivery of a system optimized for near infrared observation with the 5 meter diameter telescope at Palomar Mountain. This system initially exploits natural guide stars. Our intention is to provide a wide-ranging summary of subsystem performance measurements and several lessons learned. Noteworthy among these results is our measurement of 6.3 ± 0.2 electron read noise performance of our initial WFS camera, based upon a 64 x 64 pixel MIT/LL CCD detector, running at 600 kilopixel per sec per output amplifier. This camera was constructed by SciMeasure Analytical Systems, Inc. of Decatur, GA.

MILLIARCSECOND N-BAND OBSERVATIONS OF THE NOVA RS OPHIUCHI: FIRST SCIENCE WITH THE KECK INTERFEROMETER NULLER

We report observations of the nova RS Ophiuchi (RS Oph) using the Keck Interferometer Nuller (KIN), approximately 3.8 days following the most recent outburst that occurred on 2006 February 12. These observations represent the first scientific results from the KIN, which operates in N band from 8 to 12.5 μm in a nulling mode. The nulling technique is the sparse aperture equivalent of the conventional coronagraphic technique used in filled aperture telescopes. In this mode the stellar light itself is suppressed by a destructive fringe, effectively enhancing the contrast of the circumstellar material located near the star. By fitting the unique KIN data, we have obtained an angular size of the mid-infrared continuum emitting material of 6.2, 4.0, or 5.4 mas for a disk profile, Gaussian profile (FWHM), and shell profile, respectively. The data show evidence of enhanced neutral atomic hydrogen emission and atomic metals including silicon located in the inner spatial regime near the white dwarf (WD) relative to the outer regime. There are also nebular emission lines and evidence of hot silicate dust in the outer spatial region, centered at ~17 AU from the WD, that are not found in the inner regime. Our evidence suggests that these features have been excited by the nova flash in the outer spatial regime before the blast wave reached these regions. These identifications support a model in which the dust appears to be present between outbursts and is not created during the outburst event. We further discuss the present results in terms of a unifying model of the system that includes an increase in density in the plane of the orbit of the two stars created by a spiral shock wave caused by the motion of the stars through the cool wind of the red giant star.

Investigating a Xinξtics Inc. deformable mirror

We present a study of the operating characteristics of the Xinetics Inc. deformable mirror and the driver electronics built by the Jet Propulsion Laboratory for Palomar Observatory’s adaptive optics project. This mirror, the first of its type built by Xinetics Inc., contains 349 PMN actuators which control a 2 millimeter thick mirror surface coated with protected silver. Measurements are separated into static and dynamic categories. The static tests determine the unpowered figure of the mirror surface, the influence of solitary actuators on the mirror surface and how the actuators move as a function of voltage applied, including considerations of hysteresis and creep. We have been able to flatten the mirror surface to an rms value of 19 nanometers. In the dynamic tests, we have resolved the motion of individual actuators whose voltages were changed at frequencies up to 1.5 kHz. The purpose of this study is to show that this deformable mirror has specific characteristics that must be determined in order to optimize its control.

The Keck Interferometer

The Keck Interferometer (KI) combined the two 10 m W. M. Keck Observatory telescopes on Mauna Kea, Hawaii, as a long-baseline near- and mid-infrared interferometer. Funded by NASA, it operated from 2001 until 2012. KI used adaptive optics on the two Keck telescopes to correct the individual wavefronts, as well as active fringe tracking in all modes for path-length control, including the implementation of cophasing to provide long coherent integration times. KI implemented high sensitivity fringe-visibility measurements at H (1.6 μm), K (2.2 μm), and L (3.8 μm) bands, and nulling measurements at N band (10 μm), which were used to address a broad range of science topics. Supporting these capabilities was an extensive interferometer infrastructure and unique instrumentation, including some additional functionality added as part of the NSF-funded ASTRA program. This paper provides an overview of the instrument architecture and some of the key design and implementation decisions, as well as a description of all of the key elements and their configuration at the end of the project. The objective is to provide a view of KI as an integrated system, and to provide adequate technical detail to assess the implementation. Included is a discussion of the operational aspects of the system, as well as of the achieved system performance. Finally, details on V^2 calibration in the presence of detector nonlinearities as applied in the data pipeline are provided.

The Keck Interferometer Nuller: System Architecture and Laboratory Performance

The first high-dynamic-range interferometric mode planned to come on line at the Keck Observatory is mid-infrared nulling. This observational mode, which is based on the cancellation of the on-axis starlight arriving at the twin Keck telescopes, will be used to examine nearby stellar systems for the presence of circumstellar exozodiacal emission. This paper describes the system level layout of the Keck Interferometer Nuller (KIN), as well as the final performance levels demonstrated in the laboratory integration and test phase at the Jet Propulsion Laboratory prior to shipment of the nuller hardware to the Keck Observatory in mid-June 2004. On-sky testing and observation with the mid-infrared nuller are slated to begin in August 2004.