Debrupa Lahiri

Boron nitride nanotube reinforced polylactide-polycaprolactone copolymer composite: mechanical properties and cytocompatibility with osteoblasts and macrophages in vitro.

Biodegradable polylactide-polycaprolactone copolymer (PLC) has been reinforced with 0, 2 and 5wt.% boron nitride nanotubes (BNNTs) for orthopedic scaffold application. Elastic modulus of the PLC-5wt.% BNNT composite, evaluated through nanoindentation technique, shows a 1370% increase. The same amount of BNNT addition to PLC enhances the tensile strength by 109%, without any adverse effect on the ductility up to 240% elongation. Interactions of the osteoblasts and macrophages with bare BNNTs prove them to be non-cytotoxic. PLC-BNNT composites displayed increased osteoblast cell viability as compared to the PLC matrix. The addition of BNNTs also resulted in an increase in the expression levels of the Runx2 gene, the main regulator of osteoblast differentiation. These results indicate that BNNT is a potential reinforcement for composites for orthopedic applications.

Boron nitride nanotube reinforced hydroxyapatite composite: mechanical and tribological performance and in-vitro biocompatibility to osteoblasts.

This study proposes boron nitride nanotube (BNNT) reinforced hydroxyapatite (HA) as a novel composite material for orthopedic implant applications. The spark plasma sintered (SPS) composite structure shows higher density compared to HA. Minimal lattice mismatch between HA and BNNT leads to coherent bonding and strong interface. HA-4 wt% BNNT composite offers excellent mechanical properties-120% increment in elastic modulus, 129% higher hardness and 86% more fracture toughness, as compared to HA. Improvements in the hardness and fracture toughness are related to grain refinement and crack bridging by BNNTs. HA-BNNT composite also shows 75% improvement in the wear resistance. The wear morphology suggests localized plastic deformation supported by the sliding of outer walls of BNNT. Osteoblast proliferation and cell viability show no adverse effect of BNNT addition. HA-BNNT composite is, thus, envisioned as a potential material for stronger orthopedic implants.

Graphene nanoplatelet-induced strengthening of ultrahigh molecular weight polyethylene and biocompatibility in vitro.

Graphene nanoplatelets (GNPs) are added as reinforcement to ultrahigh molecular weight polyethylene (UHMWPE) with an intended application for orthopedic implants. Electrostatic spraying is established as a potential fabrication method for synthesizing large-scale UHMWPE-GNP composite films. At a low concentration of 0.1 wt % GNP, the composite film shows highest improvement in fracture toughness (54%) and tensile strength (71%) as compared to UHMWPE. Increased GNP content of 1 wt % leads to improvement in elastic modulus and yield strength but fracture toughness and tensile strength are reduced significantly at higher GNP content. The strengthening mechanisms of the UHMWPE-GNP system are highly influenced by the GNP concentration, which dictates its degree of dispersion and extent of polymer wrapping. The fraction of GNPs oriented along the tensile axis influences the elastic deformation, whereas the wrapping of polymer and GNP-polymer interfacial strength determines the deformation behavior in the plastic regime. The cytotoxicity of GNP to osteoblast is dependent on its concentration and is also influenced by agglomeration of particles. Lowering the concentration of GNPs in UHMWPE improves the biocompatibility of the composite surface to bone cells. The survivability of osteoblasts deteriorates up to 86% on 1 wt % GNP containing surface, whereas much smaller (6-16%) reduction is observed for 0.1 wt % GNP over 5 days of incubation.

Carbon Nanotubes : Reinforced Metal Matrix Composites

Introduction Composite Materials Development of Carbon Fibers Carbon Nanotubes: Synthesis and Properties Carbon Nanotube-Metal Matrix Composites Chapter Highlights Processing Techniques Powder Metallurgy Routes Melt Processing Thermal Spraying Electrochemical Routes Novel Techniques Characterization of Metal Matrix-Carbon Nanotube Composites X-Ray Diffraction Raman Spectroscopy Scanning Electron Microscopy with Energy Dispersive Spectroscopy High Resolution Transmission Electron Microscopy Electron Energy Loss Spectroscopy X-Ray Photoelectron Spectroscopy Mechanical Properties Evaluation Thermal Properties Electrical Properties Electrochemical Properties Metal-Carbon Nanotube Systems Aluminum-Carbon Nanotube System Copper-Carbon Nanotube System Nickel-Carbon Nanotube System Magnesium-Carbon Nanotube System Other Metals-Carbon Nanotube Systems Mechanics of Metal-Carbon Nanotube Systems Elastic Modulus of Metal Matrix-Carbon Nanotube Composites Strengthening Mechanisms in Metal Matrix-Carbon Nanotube Composites Interfacial Phenomena in Carbon Nanotube Reinforced Metal Matrix Composites Significance of Interfacial Phenomena Energetics of Carbon Nanotube-Metal Interaction Carbon Nanotube-Metal Interaction in Various Systems Dispersion of Carbon Nanotubes in Metal Matrix Significance of Carbon Nanotube Dispersion Methods of Improving Carbon Nanotube Dispersion Quantification of Carbon Nanotube Dispersion Electrical, Thermal, Chemical, Hydrogen Storage, and Tribological Properties Electrical Properties Thermal Properties Corrosion Properties Hydrogen Storage Property Sensors and Catalytic Properties Tribological Properties Computational Studies in Metal Matrix-Carbon Nanotube Composites Thermodynamic Prediction of Carbon Nanotube-Metal Interface Microstructure Simulation Mechanical and Thermal Property Prediction by the Object-Oriented Finite Element Method Summary and Future Directions Summary of Research on MM-CNT Composites Future Directions

Carbon Nanotube Reinforced Polylactide−Caprolactone Copolymer: Mechanical Strengthening and Interaction with Human Osteoblasts in Vitro

This study proposes the use of carbon nanotubes (CNTs) as reinforcement to enhance the mechanical properties of a polylactide-caprolactone copolymer (PLC) matrix. Biological interaction of PLC-CNT composites with human osteoblast cells is also investigated. Addition of 2 wt % CNT shows very uniform dispersion in the copolymer matrix, whereas 5 wt % CNT shows severe agglomeration and high porosity. PLC-2 wt % CNT composite shows an improvement in the mechanical properties with an increase in the elastic modulus by 100% and tensile strength by 160%, without any adverse effect on the ductility up to 240% elongation. An in vitro biocompatibility study on the composites shows an increase in the viability of human osteoblast cells compared to the PLC matrix, which is attributed to the combined effect of CNT content and surface roughness of the composite films.

Graphene reinforced metal and ceramic matrix composites: a review

ABSTRACT This review critically examines the current state of graphene reinforced metal (GNP-MMC) and ceramic matrix composites (GNP-CMC). The use of graphene as reinforcement for structural materials is motivated by their exceptional mechanical/functional properties and their unique physical/chemical characteristics. This review focuses on MMCs and CMCs because of their technological importance for structural applications and the unique challenges associated with developing high-temperature composites with nanoparticle reinforcements. The review discusses processing techniques, effects of graphene on the mechanical behaviour of GNP-MMCs and GNP-CMCs, including early studies on the tribological performance of graphene-reinforced composites, where graphene has shown signs of serving as a protective and lubricious phase. Additionally, the unique functional properties endowed by graphene to GNP-MMCs and GNP-CMCs, such as enhanced thermal/electrical conductivity, improved oxidation resistance, and excellent biocompatibility are overviewed. Directions for future research endeavours that are needed to advance the field and to propel technological maturation are provided.

Wear behavior and in vitro cytotoxicity of wear debris generated from hydroxyapatite-carbon nanotube composite coating.

This work evaluates the effect of carbon nanotube (CNT) addition to plasma-sprayed hydroxyapatite (HA) coating on its tribological behavior, biocompatibility of the coating, and cytotoxicity of CNT-containing wear debris. Biological response of the CNT-containing wear debris is critical for osteoblasts, the bone-forming cells, and macrophages, the cells that clear up wear debris from blood stream. The addition of 4 wt % CNTs to HA coating reduces the volume of wear debris generation by 80% because of the improved elastic modulus and fracture toughness. CNT reinforcement has a pronounced effect on the particle size in the wear debris and subsequent biological response. There was a slight increase in the numbers and viability of osteoblasts grown on HA-CNT compared with HA alone. The cytotoxic effect of HA and HA-CNT debris to macrophages and osteoblasts was similar, demonstrating that loose CNT does not pose a problem to these cells.

Carbon Nanotubes: How Strong Is Their Bond with the Substrate?

A reliable quantification technique for interpreting nanomaterial-substrate bond strength is highly desired to predict efficient, long-term performance of nanomaterial-based devices. Adopting a novel nanoscratch-based technique, here we demonstrate quantification of carbon nanotube (CNT)-substrate adhesion strength for dense CNT structure and for patterned carbon nanocone (CNC) structures. Debonding energy for a single CNT is illustrated to range between 1 and 10 pJ, and the variation is strongly dependent on the nature of the interface between CNTs, catalysts, and substrates. Our proposed technique could be adopted for characterization of bonding strength between a wide variety of nanotubes, nanowires, and other one-dimensional nanostructured materials and their underlying substrates.

Multi-scale hierarchy of Chelydra serpentina: microstructure and mechanical properties of turtle shell.

Carapace, the protective shell of a freshwater snapping turtle, Chelydra serpentina, shields them from ferocious attacks of their predators while maintaining light-weight and agility for a swim. The microstructure and mechanical properties of the turtle shell are very appealing to materials scientists and engineers for bio-mimicking, to obtain a multi-functional surface. In this study, we have elucidated the complex microstructure of a dry Chelydra serpentinas shell which is very similar to a multi-layered composite structure. The microstructure of a turtle shells carapace elicits a sandwich structure of waxy top surface with a harder sub-surface layer serving as a shielding structure, followed by a lamellar carbonaceous layer serving as shock absorber, and the inner porous matrix serves as a load-bearing scaffold while acting as reservoir of retaining water and nutrients. The mechanical properties (elastic modulus and hardness) of various layers obtained via nanoindentation corroborate well with the functionality of each layer. Elastic modulus ranged between 0.47 and 22.15 GPa whereas hardness varied between 53.7 and 522.2 MPa depending on the microstructure of the carapace layer. Consequently, the modulus of each layer was represented into object oriented finite element (OOF2) modeling towards extracting the overall effective modulus of elasticity (~4.75 GPa) of a turtles carapace. Stress distribution of complex layered structure was elicited with an applied strain of 1% in order to understand the load sharing of various composite layers in the turtles carapace.

Quantification of carbon nanotube induced adhesion of osteoblast on hydroxyapatite using nano-scratch technique

This paper explores the nano-scratch technique for measuring the adhesion strength of a single osteoblast cell on a hydroxyapatite (HA) surface reinforced with carbon nanotubes (CNTs). This technique efficiently separates out the contribution of the environment (culture medium and substrate) from the measured adhesion force of the cell, which is a major limitation of the existing techniques. Nano-scratches were performed on plasma sprayed hydroxyapatite (HA) and HA-CNT coatings to quantify the adhesion of the osteoblast. The presence of CNTs in HA coating promotes an increase in the adhesion of osteoblasts. The adhesion force and energy of an osteoblast on a HA-CNT surface are 17 ± 2 µN/cell and 78 ± 14 pJ/cell respectively, as compared to 11 ± 2 µN/cell and 45 ± 10 pJ/cell on a HA surface after 1 day of incubation. The adhesion force and energy of the osteoblasts increase on both the surfaces with culture periods of up to 5 days. This increase is more pronounced for osteoblasts cultured on HA-CNT. Staining of actin filaments revealed a higher spreading and attachment of osteoblasts on a surface containing CNTs. The affinity of CNTs to conjugate with integrin and other proteins is responsible for the enhanced attachment of osteoblasts. Our results suggest that the addition of CNTs to surfaces used in medical applications may be beneficial when stronger adhesion of osteoblasts is desired.