Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Dengfu Chen is active.

Publication


Featured researches published by Dengfu Chen.


Journal of Iron and Steel Research International | 2006

Radiant Image Simulation of Pulverized Coal Combustion in Blast Furnace Raceway

Liangying Wen; Chenguang Bai; Yang-qi Ou; Dengfu Chen; Guibao Qiu

The relationship between two-dimensional radiant image and three-dimensional radiant energy in blast furnace raceway was studied by numerical simulation of combustion process. Taking radiant image as radiant boundary for numerical simulation of combustion process, the uneven radiation parameter can be calculated. A method to examine thre-edimensional temperature distribution in blast furnace raceway was put forward by radiant image processing. The numeral temperature field matching the real combustion can be obtained by proposed numeric image processing technique.


Journal of Iron and Steel Research International | 2015

Interface analysis and hot deformation behaviour of a novel laminated composite with high-Cr cast iron and low carbon steel prepared by hot compression bonding

Zhengyi Jiang; Xingjian Gao; Sheng-li Li; Hong Mei Zhang; Dengfu Chen; Jian-zhong Xu

A hot compression bonding process was developed to prepare a novel laminated composite consisting of high-Cr cast iron (HCCI) as the inner layer and low carbon steel (LCS) as the outer layers on a Gleeble 3500 thermomechanical simulator at a temperature of 950°C and a strain rate of 0.001 s−1. Interfacial bond quality and hot deformation behaviour of the laminate were studied by microstructural characterisation and mechanical tests. Experimental results show that the metallurgical bond between the constituent metals was achieved under the proposed bonding conditions without discernible defects and the formation of interlayer or intermetallic layer along the interface. The interfacial bond quality is excellent since no deterioration occurred around the interface which was deformed by Vickers indentation and compression test at room temperature with parallel loading to the interface. After well cladding by the LCS, the brittle HCCI can be severely deformed (about 57% of reduction) at high temperature with crack-free. This significant improvement should be attributed to the decrease of crack sensitivity due to stress relief by soft claddings and enhanced flow property of the HCCI by simultaneous deformation with the LCS.


Materials & Design | 2014

Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding

Xingjian Gao; Zhengyi Jiang; Dongbin Wei; Sihai Jiao; Dengfu Chen; Jianzhong Xu; Xiaoming Zhang; Dianyao Gong


Rare Metals | 2009

Preparation and characterization of porous titanium using space-holder technique

Wenjuan Niu; Chenguang Bai; Guibao Qiu; Qiang Wang; Liangying Wen; Dengfu Chen; Lingyan Dong


Isij International | 2010

Development and Application of Dynamic Soft-reduction Control Model to Slab Continuous Casting Process

Zhiwei Han; Dengfu Chen; Ke Feng; Mujun Long


Isij International | 2007

The Review of Microwave Applications in Metallurgical Process in China

Chenguang Bai; Wei Ren; Guibao Qiu; Meilong Hu; Dengfu Chen; Liangying Wen


Archive | 2009

Preparation of porosity controllable porous titanium

Guibao Qiu; Wenjuan Niu; Chenguang Bai; Xuewei Lu; Dengfu Chen; Liangying Wen; Lingyan Dong


Materials Science and Engineering A-structural Materials Properties Microstructure and Processing | 2016

The effect of initial aging treatment on the microstructure and mechanical properties of cryorolled 6016 Al alloy

Xiuyong Chen; L. Mei; Dengfu Chen; Z.L. Bao; Q. Liu


Materials Science and Engineering A-structural Materials Properties Microstructure and Processing | 2014

Constitutive Analysis For Hot Deformation Behaviour Of Novel Bimetal Consisting Of Pearlitic Steel And Low Carbon Steel

Xingjian Gao; Zhengyi Jiang; Dongbin Wei; Huijun Li; Sihai Jiao; Jianzhong Xu; Xiaoming Zhang; Jing Tao Han; Dengfu Chen


Archive | 2007

Microcrystal glass made from titanium-containing magnetic iron are tailings

Dengfu Chen; Chenguang Bai; Lingyan Dong; Liangying Wen; Qi Liao

Collaboration


Dive into the Dengfu Chen's collaboration.

Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Xingjian Gao

University of Wollongong

View shared research outputs
Top Co-Authors

Avatar

Zhengyi Jiang

University of Wollongong

View shared research outputs
Top Co-Authors

Avatar

Jianzhong Xu

Northeastern University

View shared research outputs
Top Co-Authors

Avatar

Q. Liu

Chongqing University

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Researchain Logo
Decentralizing Knowledge