Denis Gentili

Bovine serum albumin-based magnetic nanocarrier for MRI diagnosis and hyperthermic therapy: a potential theranostic approach against cancer.

The scientific communityis seeking to exploit the intrinsic properties of magneticnanoparticles (MNPs) to obtain medical breakthroughs indiagnosisandtherapy.OneofthemainadvantagesofmagneticNPs is that they can be visualized acting as magnetic contrastagents(CA)formagneticresonanceimaging(MRI).Heatedina high-frequency magnetic field they trigger drug release orproducehyperthermia/ablationoftissues,currentlyreportedasmagnetic fluid hyperthermia (MFH). Accordingly, the termtheranostic nanomedicine has been defined as an integratednanotherapeutic system, which can diagnose, provide targetedtherapy and monitor the response to therapy.

Micro- and nanopatterning by lithographically controlled wetting

This protocol describes how to perform lithographically controlled wetting (LCW). LCW enables large-area patterning of microstructures and nanostructures of soluble materials, either organic or inorganic, including biological compounds in buffer solutions or compounds for cell guidance. LCW exploits the capillary forces of menisci established under the protrusions of a stamp placed in contact with a liquid film. In the space confined by each meniscus, the self-organization of the deposited solute yields highly ordered structures that replicate the motif of the stamp protrusions. The method does not require any particular infrastructure and can be accomplished by using simple tools such as compact discs or microscopy grids. Compared with other printing methods, LCW is universal for soluble materials, as it does not require chemical binding or other specific interactions between the solute and the surface. A process cycle takes from 2 to 36 h to be completed, depending on the choice of materials.

Ambipolar Multi‐Stripe Organic Field‐Effect Transistors

Among these, the exploitation of sensing capabilities has recently been a focus of major interest because of OFETs versatility, low costs and their integration with microfl uidics. In the simplest confi guration of OFETs sensor, the direct electrical detection of analytes is produced by the fi eld-effect modulation of the conductivity of the organic semiconductor layer due to interaction of the semiconductor with the analytes or with the light. The possibility of building arrays of OFETs, each bearing a different active material, allows the detection and identifi cation of a variety of substances in solution as well as in the gas phase. [ 15 ]

Self-organization of functional materials in confinement.

This Account aims to describe our experience in the use of patterning techniques for addressing the self-organization processes of materials into spatially confined regions on technologically relevant surfaces. Functional properties of materials depend on their chemical structure, their assembly, and spatial distribution at the solid state; the combination of these factors determines their properties and their technological applications. In fact, by controlling the assembly processes and the spatial distribution of the resulting structures, functional materials can be guided to technological and specific applications. We considered the principal self-organizing processes, such as crystallization, dewetting and phase segregation. Usually, these phenomena produce defective molecular films, compromising their use in many technological applications. This issue can be overcome by using patterning techniques, which induce molecules to self-organize into well-defined patterned structures, by means of spatial confinement. In particular, we focus our attention on the confinement effect achieved by stamp-assisted deposition for controlling size, density, and positions of material assemblies, giving them new chemical/physical functionalities. We review the methods and principles of the stamp-assisted spatial confinement and we discuss how they can be advantageously exploited to control crystalline order/orientation, dewetting phenomena, and spontaneous phase segregation. Moreover, we highlight how physical/chemical properties of soluble functional materials can be driven in constructive ways, by integrating them into operating technological devices.

Multi-modal sensing in spin crossover compounds

We exploited the solvatochromic spin-state switching in a spin crossover (SCO) compound based on the FeII complex and the simultaneous change of spectroscopic properties for selective multimodal sensing of methanol and ethanol. We demonstrate that sensing capabilities are due to the inclusion of methanol or ethanol molecules into the crystalline structure, which tailors simultaneously the transition temperature, colour, birefringence and vibrational modes. We exploited this capability by integrating a neutral compound, switchable at room temperature, into a micrometric TAG sensitive to the colour and birefringence. The system was characterised by optical microscopy, magnetic susceptibility, Raman spectroscopy and X-ray diffraction.

Design and synthesis of novel 3,4-disubstituted pyrazoles for nanomedicine applications against malignant gliomas

A series of novel 3,4-disubstituted pyrazoles were synthesized. The cytotoxicity against U87MG glioma cell line have been investigated in vitro and three of these compounds showed promising inhibitory activity on cell growth with an IC50 lower than 90 microM. AutoDock molecular docking into type I TGF-beta receptor (TGF-beta-RI; PDB: 1py5) has been done for lead optimization of the mentioned compounds as potential TGF-beta-RI1 inhibitors. In particular, 3-aryl-4-amido pyrazole containing long omega-amino-aliphatic chain emerged as a good candidate for further optimization. Entrapment into targetable PEG-based micelles improved growth inhibition IC50 values up to 100 nM and this could lead to a novel drug delivery strategy for treating glioblastoma.

Direct On‐Surface Patterning of a Crystalline Laminar Covalent Organic Framework Synthesized at Room Temperature

We report herein an efficient, fast, and simple synthesis of an imine-based covalent organic framework (COF) at room temperature (hereafter, RT-COF-1). RT-COF-1 shows a layered hexagonal structure exhibiting channels, is robust, and is porous to N2 and CO2 . The room-temperature synthesis has enabled us to fabricate and position low-cost micro- and submicropatterns of RT-COF-1 on several surfaces, including solid SiO2 substrates and flexible acetate paper, by using lithographically controlled wetting and conventional ink-jet printing.

Logic-gate devices based on printed polymer semiconducting nanostripes.

The applications of organic semiconductors in complex circuitry such as printed CMOS-like logic circuits demand miniaturization of the active structures to the submicrometric and nanoscale level while enhancing or at least preserving the charge transport properties upon processing. Here, we addressed this issue by using a wet lithographic technique, which exploits and enhances the molecular order in polymers by spatial confinement, to fabricate ambipolar organic field effect transistors and inverter circuits based on nanostructured single component ambipolar polymeric semiconductor. In our devices, the current flows through a precisely defined array of nanostripes made of a highly ordered diketopyrrolopyrrole-benzothiadiazole copolymer with high charge carrier mobility (1.45 cm(2) V(-1) s(-1) for electrons and 0.70 cm(2) V(-1) s(-1) for holes). Finally, we demonstrated the functionality of the ambipolar nanostripe transistors by assembling them into an inverter circuit that exhibits a gain (105) comparable to inverters based on single crystal semiconductors.

Patterned conductive nanostructures from reversible self-assembly of 1D coordination polymer

In this study, the outstanding ability of the coordination polymer [Pt2(nBuCS2)4I]n (nBu = n-butyl) (1) to reversibly self-organize from solution was demonstrated. This feature allowed us to generate highly electrical conductive structures located upon demand on technologically relevant surfaces, by easy-to-handle and low cost micromolding in capillaries (MIMIC) and lithographically controlled wetting (LCW). Electrical characterization reveals a near Ohmic behaviour and a high stability of the stripes (in air). Electrodes produced by the MIMIC technique from a solution of compound 1 demonstrated that this material can be efficiently used as electrodes for organic field-effect transistors (OFETs).

Structure–property relationships in multifunctional thieno(bis)imide-based semiconductors with different sized and shaped N-alkyl ends

The relationships between the molecular structure, packing modalities, charge mobility and light emission in organic thin films is a highly debated and controversial issue, with both fundamental and technological implications in the field of organic optoelectronics. Thieno(bis)imide (TBI) based molecular semiconductors provide an interesting combination of good processability, tunable self-assembly, ambipolar charge transport and electroluminescence, and are therefore an ideal test base for fundamental studies on the structure–property correlation in multifunctional molecular systems. Herein, we introduce a new class of thieno(bis)imide quaterthiophenes having alkyl side chains of different shapes (linear, cyclic, branched) and lengths (C1–C8). We found that contrarily to what is generally observed in most molecular semiconductors, the length of the alkyl substituent does not affect the optical, self-assembly and charge transport properties of TBI materials. However, different electroluminescence powers are observed by increasing the alkyl side, this suggesting a potential tool for the selective modulation of TBI functionalities. A deep experimental and theoretical investigation on this new family of TBI materials is provided.