Denise Tofanello Gimenes

Fast and direct determination of butylated hydroxyanisole in biodiesel by batch injection analysis with amperometric detection.

We report here, for the first time, application of batch injection analysis (BIA) with amperometric detection for determination of the phenolic antioxidant butylated hydroxyanisole (BHA) in biodiesel. A sample plug was directly injected onto a boron-doped diamond electrode immersed in 50% v/v hydroethanolic solution with 0.1 mol L(-1) HClO(4) using an electronic micropipette. Importantly, the only preparation step required for biodiesel analysis is dilution in the same hydroethanolic electrolyte solution. Our proposed method has several advantages for routine biodiesel analysis, including: a low relative standard deviation between injections (0.29%, n=20), high analytical frequency (120 h(-1)), adequate recovery values (93-101%) for spiked samples, satisfactory accuracy (based on comparative determinations by high-performance liquid-chromatography), and a low detection limit (100 ng of BHA per g of biodiesel). Finally, our method can be adapted for the determination of other antioxidants in biodiesel samples.

Two new electrochemical methods for fast and simultaneous determination of codeine and diclofenac.

In this paper, we present two new electrochemical methods for fast and simultaneous determination of codeine (CO) and diclofenac (DCF). The first one is based on batch injection analysis with amperometric detection (BIA-MPA) and the second one is based on capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C(4)D). The proposed BIA-MPA method is highly-precise (RSD of 1.1% and 0.9% for DCF and CO, respectively; n=10), fast (300 injections h(-1)) and has low detection limits (1.1 and 1.0 µmol L(-1) for DCF and CO, respectively). The proposed CE-C(4)D method allows the determination of CO and DFC in less than 1 min with high precision (RSD of 0.3% and 0.7% for DCF and CO, respectively; n=10) and low detection limits (11 and 21 µmol L(-1) for DCF and CO, respectively). Both proposed methods were applied to the determination of CO and DCF in pharmaceutical samples with similar results to those achieved by high-performance liquid chromatography (HPLC) at a 95% confidence level.

Direct amperometric determination of tert-butylhydroquinone in biodiesel

The direct amperometric determination of tert-butylhydroquinone (TBHQ) in biodiesel at an unmodified glassy carbon electrode is reported. A biodiesel aliquot was added into an electrochemical cell containing a 75% (v/v) ethanol-water solution under stirring (with final concentration of 50 mmol L(-1) HClO(4)). The amperometric method involved the continuous application of three sequential potential pulses to the working electrode (700 mV for 300 ms, 0 mV for 100 ms and -50 mV for 1s). TBHQ was continuously monitored at the first (direct oxidation) and optionally at the second (reduction) potential pulse while the third potential pulse was applied for cleaning of the electrode surface. For comparison, the samples were also analyzed by high-performance liquid-chromatography and a good agreement between the results was verified. Recovery values for spiked samples were between 90% and 95% and the reproducibility of the proposed method was around 5% (n=5). The proposed method can be easily adapted for on-site analysis.

Batch injection analysis with amperometric detection: application for simultaneous analysis using a single working electrode

In this work, we describe for the first time the association of batch injection analysis (BIA) with dual pulse amperometric (DPA) detection for simultaneous determination of multi-analytes using a single working electrode. The sequence of pulses is selected in such a way that the analytes are detected individually and independently at the same working unmodified electrode (using a correction factor). BIA provides fast response (high-throughput analysis), elevated precision, reduction of sample volumes and minimization of waste. To illustrate the potential of this method, BIA-DPA was applied for the simultaneous determination of biodiesel preservatives (tert-butylhydroquinone and butylated hydroxyanisole) and pharmaceutical compounds (paracetamol and caffeine or dipyrone and caffeine).

Simultaneous determination of diclofenac and its common counter-ions in less than 1 minute using capillary electrophoresis with contactless conductivity detection.

This paper presents a method for fast and simultaneous determination of diclofenac (DCF) and its common counter‐ions (potassium, sodium, and diethylammonium) using CE with capacitively coupled contactless conductivity detection (CE‐C4D). On the basis of a single electropherogram (about 50 s), the proposed method allows the determination of the stoichiometry, absolute quantification and evaluation of the degradation degree of the active pharmaceutical ingredient (DCF). A linear working range from 100 to 500 μmol/L was obtained for all analytes in an equimolar TRIS/TAPS (10 mmol/L) solution as the background electrolyte as well as adequate LOD (7, 6, 7, and 10 μmol/L for K+, Na+, diethylammonium, and DCF, respectively). The proposed method was applied to the analysis of pharmaceutical formulations (tablets and spray form) with similar results to those achieved by HPLC (DCF) or flame photometry (K and Na) at a 95% confidence level.

Simple flow injection amperometric system for simultaneous determination of dipyrone and paracetamol in pharmaceutical formulations

In this work a simple flow injection methodology with pulsed amperometric detection for simultaneous determination of dipyrone (DI) and paracetamol (PCT) in pharmaceutical formulations is described. The compounds are detected by applying four sequential potential pulses as function of the time. Dipyrone is directly detected at +0.40 V and paracetamol indirectly at 0.00 V through the reduction of the oxidation product (N-acetyl-p-benzoquinoneimine) electrochemically generated at +0.65 V. The fourth potential pulse (-0.05 V) is applied for the cleaning of the electrode surface (glassy carbon). The linear response range was optimized between 9 and 45 mg L-1 for dipyrone and 6 and 30 mg L-1 for paracetamol. Linear regression of these two series of experiments leads to excellent correlation coefficients (R = 0.999) for both analytes and recoveries of around 100%. The proposed methodology allows an analytical frequency of 45 injections h-1 with a consumption of 1.5 mL of solution per minute. The relative standard deviation for 24 successive injections of solutions containing DI and PCT was calculated as 0.4% and 0.2%, respectively. The developed methodology was successfully used for the determination of dipyrone and paracetamol in pharmaceutical samples.

Análise por injeção em fluxo com detecção amperométrica de múltiplos pulsos: potencialidades e aplicações

The potentialities and applications of the Multiple Pulse Amperometric detection (MPA) coupled with Flow Injection Analysis (FIA) are evaluated. Important aspects as cleaning and activation of electrode surface, indirect and simultaneous analysis of electroactive compounds and the use of the internal standard method for quantifications utilizing FIA-MPA are presented. The main parameters concerning the detection of electroactive analytes by multiple pulse amperometric detection in flowing solutions were also discussed. In addition, aspects such as flow rate, sample volume, application time of the potential pulses and instrumentation necessary for implementing of the method were also addressed.

Determination of propranolol and hydrochlorothiazide by batch injection analysis with amperometric detection and capillary electrophoresis with capacitively coupled contactless conductivity detection

We report two new electrochemical methods for the simultaneous determination of propranolol (PROP) and hydrochlorothiazide (HCT). One method is based on batch injection analysis with multiple pulse amperometric detection (BIA-MPA) and the other on capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D). The BIA-MPA procedure is highly precise (RSD < 2.1%, n = 10, for both PROP and HCT), fast (130 injections per h) and has low detection limits (0.17 and 1.9 μmol L−1 for PROP and HCT, respectively). The proposed CE-C4D method allows the determination of PROP and HCT in less than 1 minute with high precision (RSD < 2.8%, n = 10, for both PROP and HCT) and low detection limits (30 and 10 μmol L−1 for PROP and HCT, respectively). Both of the proposed methods were applied to the determination of PROP and HCT in pharmaceutical samples.

Simultaneous determination of three species with a single-injection step using batch injection analysis with multiple pulse amperometric detection

In this work, the possibility of simultaneous determination of three compounds with a single-injection step using batch injection analysis with multiple pulse amperometric detection (BIA-MPA) is demonstrated for the first time. A sequence of three potential pulses (+1.25 V, +1.60 V, and +1.80 V) was applied with the acquisition of three separate amperograms. 8-Chlorotheophylline was detected selectively at +1.25 V, both 8-chlorotheophylline and pyridoxine at +1.60V and 8-chlorotheophylline, pyridoxine, and diphenhydramine at +1.80 V. Subtraction between the currents detected at the three amperograms (with the help of correction factors) was used for the selective determination of pyridoxine and diphenhydramine. The proposed method is simple, inexpensive, fast (60 injections h(-1)), and present selectivity for the determination of the three compounds in pharmaceutical samples, with results similar to those obtained by HPLC (95% confidence level).

Determinação simultânea de ácido ascórbico e ácido acetilsalicílico usando análise por injeção em fluxo com detecção amperométrica pulsada

A simple flow system with multiple pulse amperometric detection using a single working electrode is proposed for simultaneous determination of ascorbic (AA) and acetylsalicylic (AAS) acids in pharmaceutical formulations. The procedure is based on application of two potential pulses: 0.90 V/50 ms: oxidation and determination of AA without the interference of AAS; 1.35 V/50 ms: oxidation of both compounds and quantification of AAS by current subtraction using a correction factor. Sampling rate was estimated as 125 injections per hour and the limits of detection were 0.17 and 0.16 µmol L-1 for AA and AAS, respectively. Results for commercial samples agreed with those obtained using HPLC.