Denzil S. Frost

Molecular Dynamics Simulations of Nanoparticle Self-Assembly at Ionic Liquid–Water and Ionic Liquid–Oil Interfaces

We have studied the self-assembly of hydrophobic nanoparticles at ionic liquid (IL)-water and IL-oil (hexane) interfaces using molecular dynamics (MD) simulations. For the 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)])/water system, the nanoparticles rapidly approached the IL-water interface and equilibrated more into the IL phase although they were initially in the water phase. In contrast, when the nanoparticles were dispersed in the hexane phase, they slowly approached the IL-hexane interface but remained primarily in the hexane phase. Consequently, the IL-hexane interface was rather undisturbed by the nanoparticles whereas the IL-water interface changed significantly in width and morphology to accommodate the presence of the nanoparticles. The equilibrium positions of the nanoparticles were also supported and explained by potential of mean force (PMF) calculations. Interesting ordering and charge distributions were observed at the IL-liquid interfaces. At the IL-hexane interface, the [BMIM] cations preferentially oriented themselves so that they were immersed more in the hexane phase and packed efficiently to reduce steric hindrance. The ordering likely contributed to a heightened IL density and a slightly positive charge at the IL-hexane interface. In contrast, the cations at the IL-water interface were oriented isotropically unless in the presence of nanoparticles, where the cations aligned across the nanoparticle surfaces.

Molecular dynamics simulations of charged nanoparticle self-assembly at ionic liquid-water and ionic liquid-oil interfaces

Nanoparticle self-assembly at liquid-liquid interfaces can be significantly affected by the individual nanoparticle charges. This is particularly true at ionic liquid (IL) based interfaces, where Coulombic forces play a major role. Employing 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) as a model IL, we have studied the self-assembly of hydrophobic nanoparticles with different surface charges at the IL/water and IL/oil (hexane) interfaces using molecular dynamics simulations. In the IL/water system, the nanoparticles were initially dispersed in the water phase but quickly equilibrated at the interface, somewhat in favor of the IL phase. This preference was lessened with increased nanoparticle charge. In the IL/hexane system, all charged nanoparticles interacted with the IL to some extent, whereas the uncharged nanoparticles remained primarily in the hexane phase. Potential of mean force calculations supported the observations from the equilibrium studies and provided new insights into the interactions of the nanoparticles and ionic liquid based interfaces.

Particle self-assembly in oil-in-ionic liquid Pickering emulsions.

We have studied polydimethylsiloxane (PDMS)-in-1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) Pickering emulsions stabilized by polystyrene microparticles with different surface chemistry. Surprisingly, in contrast to the consensus originating from oil/water Pickering emulsions in which the solid particles equilibrate at the oil-water droplet interfaces and provide effective stabilization, here the polystyrene microparticles treated with sulfate, aldehyde sulfate, or carboxylate dissociable groups mostly formed monolayer bridges among the oil droplets rather than residing at the oil-ionic liquid interfaces. The bridge formation inhibited individual droplet-droplet coalescence; however, due to low density and large volume (thus the buoyant effect), the aggregated oil droplets actually promoted oil/ionic liquid phase separation and distressed emulsion stability. Systems with binary heterogeneous polystyrene microparticles exhibited similar, even enhanced (in terms of surface chemistry dependence), bridging phenomenon in the PDMS-in-[BMIM][PF(6)] Pickering emulsions.

Particle self-assembly at ionic liquid-based interfaces

This review presents an overview of the nature of ionic liquid (IL)-based interfaces and self-assembled particle morphologies of IL-in-water, oil- and water-in-IL, and novel IL-in-IL Pickering emulsions with emphasis on their unique phenomena, by means of experimental and computational studies. In IL-in-water Pickering emulsions, particles formed monolayers at ionic liquid-water interfaces and were close-packed on fully covered emulsion droplets or aggregated on partially covered droplets. Interestingly, other than equilibrating at the ionic liquid-water interfaces, microparticles with certain surface chemistries were extracted into the ionic liquid phase with a high efficiency. These experimental findings were supported by potential of mean force calculations, which showed large energy drops as hydrophobic particles crossed the interface into the IL phase. In the oil- and water-in-IL Pickering emulsions, microparticles with acidic surface chemistries formed monolayer bridges between the internal phase droplets rather than residing at the oil/water-ionic liquid interfaces, a significant deviation from traditional Pickering emulsion morphology. Molecular dynamics simulations revealed aspects of the mechanism behind this bridging phenomenon, including the role of the droplet phase, surface chemistry, and inter-particle film. Novel IL-in-IL Pickering emulsions exhibited an array of self-assembled morphologies including the previously observed particle absorption and bridging phenomena. The appearance of these morphologies depended on the particle surface chemistry as well as the ILs used. The incorporation of particle self-assembly with ionic liquid science allows for new applications at the intersection of these two fields, and have the potential to be numerous due to the tunability of the ionic liquids and particles incorporated, as well as the particle morphology by combining certain groups of particle surface chemistry, IL type (protic or aprotic), and whether oil or water is incorporated.

Understanding droplet bridging in ionic liquid-based Pickering emulsions

We have studied the unique bridging behavior of solid-stabilized oil-in-ionic liquid (IL) and water-in-ionic liquid emulsions with respect to particle concentration, particle size, and droplet phase using a confocal laser scanning microscope. The emulsions exhibited three morphology regimes: (1) single, sparingly covered droplets, (2) bridged clusters of droplets, and (3) fully covered droplets. The degree of bridging was directly proportional to the total potential bridging area which can be determined from the particle size and concentration. This type of emulsion diverges from much of the conventional wisdom of oil-water Pickering emulsions regarding the particle self-assembly onto droplet interfaces and liquid film stability. While the focus here is the bridging regime, we also report interesting observations, specifically, the deformed oil droplets and the transport of excess solid particles into the water droplets, in the fully covered droplet regime. The work identified new self-assembled particle structure and morphology in solid-stabilized emulsions.

Molecular dynamics studies on the adaptability of an ionic liquid in the extraction of solid nanoparticles.

Recently, a number of publications have suggested that ionic liquids (ILs) can absorb solid particles. This development may have implications in fields like oil sand processing, oil spill beach cleanup, and water treatment. In this Article, we provide a computational investigation of this phenomenon via molecular dynamics simulations. Two particle surface chemistries were investigated: (1) hydrocarbon-saturated and (2) silanol-saturated, representing hydrophobic and hydrophilic particles, respectively. Employing 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]) as a model IL, these nanoparticles were allowed to equilibrate at the IL/water and IL/hexane interfaces to observe the interfacial self-assembled structures. At the IL/water interface, the hydrocarbon-based nanoparticles were nearly completely absorbed by the IL, while the silica nanoparticles maintained equal volume in both phases. At the IL/hexane interface, the hydrocarbon nanoparticles maintained minimal interactions with the IL, whereas the silica nanoparticles were nearly completely absorbed by it. Studies of these two types of nanoparticles immersed in the bulk IL indicate that the surface chemistry has a great effect on the corresponding IL liquid structure. These effects include layering of the ions, hydrogen bonding, and irreversible absorption of some ions to the silica nanoparticle surface. We quantify these effects with respect to each nanoparticle. The results suggest that ILs likely exhibit this absorption capability because they can form solvation layers with reduced dynamics around the nanoparticles.

Nonconvective mixing of miscible ionic liquids.

Ionic liquids (ILs) are ionic compounds that are liquid at room temperature. We studied the spontaneous mixing behavior between two ILs, ethylammonium nitrate (EAN) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), and observed notable phenomena. Experimental studies showed that the interface between the two ILs was unusually long-lived, despite the ILs being miscible with one another. Molecular dynamics (MD) simulations supported these findings and provided insight into the micromixing behavior of the ILs. We found that not only did the ions experience slow diffusion as they mix but also exhibited significant ordering into distinct regions. We suspect that this ordering disrupted concentration gradients in the direction normal to the interface, thus hindering diffusion in this direction and allowing the macroscopic interface to remain for long periods of time. Intermolecular interactions responsible for this behavior included the O-NH interaction between the EAN ions and the carbon chain-carbon chain interactions between the [BMIM](+) cations, which associate more strongly in the mixed state than in the pure IL state.

Comparison of the capillary wave method and pressure tensor route for calculation of interfacial tension in molecular dynamics simulations

We have studied the calculation of surface and interfacial tension for a variety of liquid–vapor and liquid–liquid interfaces using molecular dynamics (MD) simulations. Because of the inherently small scale of MD systems, large pressure fluctuations can cause imprecise calculations of surface tension using the pressure tensor route. The capillary wave method exhibited improved precision and stability throughout all of the simulated systems in this study. In order to implement this method, the interface was defined by fitting an error function to the density profile. However, full mapping of the interface from coordinate files produced enhanced accuracy. Upon increasing the system size, both methods exhibited higher precision, although the capillary wave method was still more reliable.

Ionic Liquids in Multiphase Systems

Ionic liquids (ILs) can be used to replace one or more phases in conventional oil/water emulsions including Pickering emulsions—surfactant-free emulsions which utilize nanoor micron-sized particles to stabilize the immiscible liquid-liquid interface. Due to the extreme tunability of both the ILs and particles used, the study of IL-based Pickering emulsions yields novel emulsion morphologies and insights into the ionic liquid-liquid-particle interactions present. This work discusses extensive experimental work on IL-based Pickering emulsions and IL/liquid interfaces, emphasizing unique phenomena—such as “bridging” between emulsion droplets and spontaneous particle transport across the interface—never observed in more conventional Pickering emulsions. Molecular dynamics (MD) simulations of particles at the IL/liquid interface are also discussed, and fundamental insights from these simulations are used to enhance understanding of the unique interface behavior revealed by experiment.