Desmond Ofosu Anim

E-Waste Disposal Effects on the Aquatic Environment: Accra, Ghana

The volume of e-waste is growing around the world, and, increasingly, it is being disposed of by export from developed to developing countries. This is the situation in Ghana, and, in this paper we address the potential consequences of such e-waste disposal. Herein, we describe how e-waste is processed in Ghana, and what the fate is of e-waste-chemical contaminants during recycling and storage. Finally, to the extent it is known, we address the prospective adverse effects of e-waste-related contaminants on health and aquatic life downstream from a large e-waste disposal facility in Accra, Ghana.In developing countries, including Ghana, e-waste is routinely disassembled by unprotected workers that utilize rudimentary methods and tools. Once disassembled,e-waste components are often stored in large piles outdoors. These processing and storage methods expose workers and local residents to several heavy metals and organic chemicals that exist in e-waste components. The amount of e-waste dumped in Ghana is increasing annually by about 20,000 t. The local aquatic environment is at a potential high risk, because the piles of e-waste components stored outside are routinely drenched or flooded by rainfall, producing run-off from storage sites to local waterways. Both water and sediment samples show that e-waste-related contaminant shave entered Ghanas water ways.The extent of pollution produced in key water bodies of Ghana (Odaw River and the Korle Lagoon) underscores the need for aquatic risk assessments of the many contaminants released during e-waste processing. Notwithstanding the fact that pollutants from other sources reach the water bodies, it is clear that these water bodies are also heavily impacted by contaminants that are found in e-waste. Our concern is that such exposures have limited and will continue to limit the diversity of aquatic organisms.There have also been changes in the abundance and biomass of surviving species and changes in food chains. Therefore, the need for actions to be taken to reduce entry of e-waste pollutants into Ghanas aquatic environment is real and is immediate.Heavy metals (e.g., lead, cadmium, copper and zinc) and organic pollutants (e.g.,PCDD/Fs and PBDEs) have been detected in the sediments of local water bodies in quantities that greatly exceed background levels. This fact alone suggests that aquatic organisms that live in the affected water bodies are highly exposed to these toxic, bio-accumulative, and persistent contaminants. These contaminants have been confirmed to result from the primitive methods used to recycle and process e-waste within the local environment.Only limited local data exist on the threats posed by these e-waste-related contaminants on nearby natural resources, especially aquatic organisms. In this review,we have addressed the potential toxicity of selected heavy metals and organic pollutants on aquatic organisms. Since there are no data on concentrations of contaminants in the water column, we have based our predictions of effects on pollutant release rates from sediments. Pollutants that are attached to sediments are routinely released into the water column from diffusion and advection, the rate of which depends on pH and Eh of the sediments. E-waste contaminants have the potential to produce deleterious effects on the behavior, physiology, metabolism, reproduction,development and growth of many aquatic organisms. Because it is confirmed that both heavy metal and organic contaminants are reaching the biota of Ghanas local waterways, we presume that they are producing adverse effects. Because local data on the aquatic toxicity of these contaminants are as yet unavailable, we strongly recommend that future research be undertaken to examine, on a large scale and long-term basis, both contamination levels in biota, and adverse effects on biota of the nearby water bodies.

Parametric uncertainty and sensitivity analysis of hydrodynamic processes for a large shallow freshwater lake

Abstract A parametric uncertainty and sensitivity analysis of hydrodynamic processes was conducted for a large shallow freshwater lake, Lake Taihu, China. Ten commonly used parameters in five groups were considered including: air–water interface factor, water–sediment interface factor, surrounding terrain factor, turbulent diffusion parameters and turbulent intensity parameters. Latin hypercube sampling (LHS) was used for sampling the parametric combinations, which gave predictive uncertainty results directly without using surrogate models, and the impacts of different parametric distribution functions on the results were investigated. The results showed that the different parametric distribution functions (e.g. uniform, normal, lognormal and triangular) for sampling had very little impact on the uncertainty and sensitivity analysis of the lake hydrodynamic model. The air–water interface factor (wind drag coefficient) and surrounding terrain factor (wind shelter coefficient) had the greatest influence on the spatial distribution of lake hydrodynamic processes, especially in semi-closed bays and lake regions with complex topography, accounting for about 60–70% and 20%, respectively, of the uncertainty on the results. Vertically, velocity in the surface layer was also largely influenced by the two factors, followed by velocity in the bottom layer; the middle velocity had minimal impact. Likewise, the water–sediment interface factor (i.e. bottom roughness height) ranked third, contributing about 10% to the uncertainty of the hydrodynamic processes of the lake. In contrast, turbulent diffusion parameters and turbulent intensity parameters in the lake hydrodynamic model had little effect on the uncertainty of simulated results (less than 1% contribution). The findings were sufficiently significant to reduce the parameter uncertainties and calibration workload of the hydrodynamic model in large shallow lakes. Editor Z. W. Kundzewicz; Associate editor S. Grimaldi

Laboratory simulations of wave attenuation by an emergent vegetation of artificial Phragmites australis: an experimental study of an open-channel wave flume

abstractThis paper presents a well-controlled laboratory experimental study to evaluate wave attenuation by artifi- cial emergent plants (Phragmites australis) under different wave conditions and plant stem densities. Results showed substantial wave damping under investigated regular and irregular wave conditions and also the different rates of wave height and within canopy wave-induced flows as they travelled through the vegetated field under all tested conditions. The wave height decreased by 6%–25% at the insertion of the vegetation field and towards the downstream at a mean of 0.2 cm and 0.32 cm for regular and irregular waves respectively. The significant wave height along the vegetation field ranged from 0.89–1.76 cm and 0.8–1.28 cm with time mean height of 1.38 cm and 1.11 cm respectively for regu- lar and irregular waves. This patterns as affected by plant density and also location from the leading edge of vegetation is investigated in the study. The wave energy attenuated by plant induced frictio...

Integration of Geographical Information Science (GIS) Technology in Hydrological Modeling: A Critical Review

Current trends in hydrological modeling depend on spatial datasets, complex computational tasks and representation. As the need for the development of hydrological modeling capabilities have evolved, its integration with geographic information system (GIS) has provided a significant contribution to the efforts of hydrologic models. It serves the role of providing support in data capturing and improving hydrological modeling efforts by giving tools for effective analysis. This integration of GIS technology and hydrological modeling has resulted in great value and presents potential benefits to modelers and engineers. This paper reviewed critically, current trends of GIS technology in hydrological modeling. It also discussed the existing drawbacks as well as reviewed the future trends and prospects of this integration.