Diana Catalina Rodríguez

Monitoring the removal of nitrogen by applying a nitrification-denitrification process in a Sequencing Batch Reactor (SBR).

In this study the evaluation of nitrogen removal in wastewater from a meat products processing company was performed, using a Sequencing Batch Reactor (SBR) at pilot scale. The phases of the SBR operation were: filling, reaction (aeration and intermittent anoxia), sedimentation and discharge. In each of these phases analyses of ammonium (NH(4)(+)), nitrite (NO(2)(-)), nitrate (NO(3)(-)), pH and dissolved oxygen (DO) were carried out to monitor the process of nitrification-denitrification. The results showed that stage IV had the best performance (2.49 g COD(F)/Ld and 1.02 g NH(4)(+)-N/Ld) with a NH(4)(+)-N removal of 71%. The transformation of much of the NH(4)(+)-N to gaseous nitrogen was confirmed, with the concentration of NO(2)(-)-N and NO(3)(-)-N increasing during the reaction phase but decreasing in the effluent due to its transformation to gaseous nitrogen.

Microbiological quality indicators in waters of dairy farms: Detection of pathogens by PCR in real time

When contaminated water is used to wash the udders of dairy cattle and milking utensils, raw milk may become contaminated with pathogens. Washing with high quality water is essential to reduce the microbial contamination of milk. Furthermore, the wastewater generated in dairy herds also contains high populations of pathogens, antibiotics and nutrients that more often are thrown into the water bodies without any treatment. In this work, both supply water and wastewater from 20 dairy farms from Antioquia, Colombia was monitored for 10months to determine the presence of pathogenic microorganisms. Both Cryptosporidium and Fasciola were determined by the Polymerase Chain Reaction (PCR) technique in real time. The results showed that the supply water used for drinking and activities involving the herd, has high populations of Fasciola hepatica and Cryptosporidium parvum, with percentages of about 53.7% and 64.75% respectively. Additionally high populations of Pseudomonas aeruginosa, Shigella, Salmonella, total coliforms and Escherichia coli were found in both types of water, with values around 9.4×10(7), 2.1×10(7), 1.8×10(7), 1.9×10(10) and 1.5×10(10) UFC/100 ml respectively for the wastewater and 3.1×10(4), 1.9×10(4), 7.3×10(3), 1.2×10(5) and 6.2×10(3) UFC/100 ml for the supply water.

Effect of chlorpyrifos on the inhibition of the enzyme acetylcholinesterase by cross-linking in water-supply samples and milk from dairy cattle

A methodology for the determination of chlorpyrifos in water-supply samples and in milk from dairy cattle was developed. An amperometric biosensor was used to inhibit the enzyme acetylcholinesterase (AChE), which was immobilized by the cross-linking method (crosslinks between the enzyme and the sensor). The potential applied, the amount of enzyme to be immobilized and the acetylthiocholine (ACTh) concentration were optimized before calibration and analysis of the samples was performed. The concentration of chlorpyrifos was determined in the range of 1.0×10(-6) M to 5.0×10(-2) M with a detection limit of 5.0×10(-6) M. Spiked water samples showed high recoveries (91.32% and 93.98% for low and high chlorpyrifos levels, respectively), while milk samples exhibited a matrix effect with recoveries of 82.81% and 79.77% for high and low chlorpyrifos levels, respectively. The average concentration of chlorpyrifos in the water supply samples (5.11×10(-6) M), determined using the biosensor, was compared using gas chromatography and gave an average value of 3.04×10(-6) M. The results allow it to be concluded that although chromatographic methods are still more exact, biosensors are promising tools for the determination of analytes in the field, as they have a low cost, a reduced analysis time and good reproducibility in the data.

The operation of two EGSB reactors under the application of different loads of oxytetracycline and florfenicol.

This study evaluated the effect of the antibiotics oxytetracycline (OTC) and florfenicol (FLO) on the operation of two EGSB (expanded granular sludge bed) reactors. The experiment was conducted for 210 d in reactor R1 and 245 d in reactor R2. The reactors were inoculated with granular sludge from a upflow anaerobic sludge blanket (UASB) reactor on a local dairy farm. The sludge had an average pellet size of 2.35 mm, good sedimentability and a high percentage of organic material. The antibiotic tolerance and the inhibitory action on the bacterial population were different for each antibiotic studied. The results showed a more severe inhibitory effect on microorganisms that were in contact with increases in loads of FLO than those that were in contact with increasing loads of OTC, a condition reflected in the chemical oxygen demand (COD) removal efficiency.

Application of batch tests to assess antibiotic loads in anaerobic processes

The presence of antibiotics in drinking water and wastewater has not been widely studied because the sanitary engineering sector mainly focuses on the removal of organic matter and nutrients. There is a lack of environmental regulations for pollutants like antibiotics. Batch tests analyse biodegradability to measure the anaerobic degradation potential of the substrate, or they can be used as toxicity tests. Oxytetracycline, florfenicol (FLO), ceftiofur (CEF) and penicillin G (PEN), commonly used in Colombia for the treatment of livestock diseases, were added in different concentrations to anaerobic sludge contained in serological glass bottles. The production of methane stored in the empty spaces of the bottles was monitored in order to determine the effect of the aforementioned antibiotics on the anaerobic process. It was found that CEF did not have any inhibitory effect on methanogenic activity, while PEN showed inhibition at all concentrations evaluated.