Diane Heemsbergen

A Field Investigation of Solubility and Food Chain Accumulation of Biosolid-Cadmium Across Diverse Soil Types

One of the pathways for transfer of cadmium (Cd) through the food chain is addition of urban wastewater solids (biosolids) to soil, and many countries have restrictions on biosolid use to minimize crop Cd contamination. The basis of these restrictions often lies in laboratory or glasshouse experimentation of soil-plant transfer of Cd, but these studies are confounded by artefacts from growing crops in controlled laboratory conditions. This study examined soil to plant (wheat grain) transfer of Cd under a wide range of field environments under typical agronomic conditions, and compared the solubility and bioavailability of Cd in biosolids to soluble Cd salts. Solubility of biosolid Cd (measured by examining Cd partitioning between soil and soil solution) was found to be equal to or greater than that of soluble Cd salts, possibly due to competing ions added with the biosolids. Conversely, bioavailability of Cd to wheat and transfer to grain was less than that of soluble Cd salts, possibly due to addition of Zn with the biosolids, causing reduced plant uptake or grain loading, or due to complexation of soluble Cd2+ by dissolved organic matter.

Soil factors controlling the toxicity of copper and zinc to microbial processes in Australian soils

Abstract-Two soil microbial processes, substrate-induced nitrification (SIN) and substrate-induced respiration (SIR), were measured in the topsoils of 12 Australian field trials that were amended separately with increasing concentrations of ZnSO4 or CuSO4. The median effect concentration (EC50) values for Zn and Cu based on total metal concentrations varied between 107 and 8,298 mg kg(-1) for Zn and 108 and 2,155 mg kg(-1) Cu among soils. The differences in both Zn and Cu toxicity across the 12 soils were not explained by either the soil solution metal concentrations or CaCl2-extractable metal concentrations, because the variation in the EC50 values was larger than those using total concentrations. Toxicity of Zn and Cu decreased with increasing soil pH for SIN. For Cu, also increasing cation exchange capacity (CEC) and percent clay decreased the toxicity towards SIN. In contrast to SIN, soil pH had no significant effect on toxicity values of SIR. Significant relationships were found between the EC50 values for SIR and background Zn and CEC for Zn, and percent clay and log CEC for Cu. Relationships such as those developed in this study will permit Australian environmental regulation to move from single-value national soil quality guidelines to soil-specific quality guidelines and permit soil-specific risk assessments to be undertaken.

Modeling the toxicity of copper and zinc salts to wheat in 14 soils

Interest is mounting in developing and utilizing soil-specific soil quality guidelines. This requires quantifying the effects that soil physicochemical properties have on various ecotoxicological endpoints, including phytotoxicity. To this end, 14 agricultural soils from Australia with differing soil properties were spiked with copper (Cu) and zinc (Zn) salts and used to conduct 21-d plant growth inhibition tests using wheat (Triticum aestivum L.) in pot trials. The toxicity of Cu and Zn was similar with 10% effect concentration (EC10) values ranging from 110 to 945 and from 235 to 965 mg/kg, respectively, while the corresponding median effect concentration (EC50) values ranged from 240 to 1,405 and 470 to 1,745 mg/kg, respectively. Copper toxicity values (EC10, EC20, and EC50) were best modeled by the logarithm of cation exchange capacity (CEC) and either soil pH or electrical conductivity. Zinc EC50 and EC20 values were best modeled using the logarithm of CEC, while the EC10 data were best modeled using soil pH and the logarithm of organic carbon. These models generally estimated toxicity within a factor of two of the measured values.

Application of phytotoxicity data to a new Australian soil quality guideline framework for biosolids.

To protect terrestrial ecosystems and humans from contaminants many countries and jurisdictions have developed soil quality guidelines (SQGs). This study proposes a new framework to derive SQGs and guidelines for amended soils and uses a case study based on phytotoxicity data of copper (Cu) and zinc (Zn) from field studies to illustrate how the framework could be applied. The proposed framework uses normalisation relationships to account for the effects of soil properties on toxicity data followed by a species sensitivity distribution (SSD) method to calculate a soil added contaminant limit (soil ACL) for a standard soil. The normalisation equations are then used to calculate soil ACLs for other soils. A soil amendment availability factor (SAAF) is then calculated as the toxicity and bioavailability of pure contaminants and contaminants in amendments can be different. The SAAF is used to modify soil ACLs to ACLs for amended soils. The framework was then used to calculate soil ACLs for copper (Cu) and zinc (Zn). For soils with pH of 4-8 and OC content of 1-6%, the ACLs range from 8 mg/kg to 970 mg/kg added Cu. The SAAF for Cu was pH dependant and varied from 1.44 at pH 4 to 2.15 at pH 8. For soils with pH of 4-8 and OC content of 1-6%, the ACLs for amended soils range from 11 mg/kg to 2080 mg/kg added Cu. For soils with pH of 4-8 and a CEC from 5-60, the ACLs for Zn ranged from 21 to 1470 mg/kg added Zn. A SAAF of one was used for Zn as it concentrations in plant tissue and soil to water partitioning showed no difference between biosolids and soluble Zn salt treatments, indicating that Zn from biosolids and Zn salts are equally bioavailable to plants.

Biological and chemical assessments of zinc ageing in field soils

As zinc (Zn) is both an essential trace element and potential toxicant, the effects of Zn fixation in soil are of practical significance. Soil samples from four field sites amended with ZnSO(4) were used to investigate ageing of soluble Zn under field conditions over a 2-year period. Lability of Zn measured using (65)Zn radioisotope dilution showed a significant decrease over time and hence evidence of Zn fixation in three of the four soils. However, 0.01 M CaCl(2) extractions and toxicity measurements using a genetically modified lux-marked bacterial biosensor did not indicate a decrease in soluble/bioavailable Zn over time. This was attributed to the strong regulatory effect of abiotic properties such as pH on these latter measurements. These results also showed that Zn ageing occurred immediately after Zn spiking, emphasising the need to incubate freshly spiked soils before ecotoxicity assessments.

Bioavailability of zinc and copper in biosolids compared to their soluble salts

For essential elements, such as copper (Cu) and zinc (Zn), the bioavailability in biosolids is important from a nutrient release and a potential contamination perspective. Most ecotoxicity studies are done using metal salts and it has been argued that the bioavailability of metals in biosolids can be different to that of metal salts. We compared the bioavailability of Cu and Zn in biosolids with those of metal salts in the same soils using twelve Australian field trials. Three different measures of bioavailability were assessed: soil solution extraction, CaCl(2) extractable fractions and plant uptake. The results showed that bioavailability for Zn was similar in biosolid and salt treatments. For Cu, the results were inconclusive due to strong Cu homeostasis in plants and dissolved organic matter interference in extractable measures. We therefore recommend using isotope dilution methods to assess differences in Cu availability between biosolid and salt treatments.

Models for the field-based toxicity of copper and zinc salts to wheat in 11 Australian soils and comparison to laboratory-based models.

Laboratory-based relationships that model the phytotoxicity of metals using soil properties have been developed. This paper presents the first field-based phytotoxicity relationships. Wheat (Triticum aestivum L.) was grown at 11 Australian field sites at which soil was spiked with copper (Cu) and zinc (Zn) salts. Toxicity was measured as inhibition of plant growth at 8 weeks and grain yield at harvest. The added Cu and Zn EC10 values for both endpoints ranged from approximately 3 to 4760 mg/kg. There were no relationships between field-based 8-week biomass and grain yield toxicity values for either metal. Cu toxicity was best modelled using pH and organic carbon content while Zn toxicity was best modelled using pH and the cation exchange capacity. The best relationships estimated toxicity within a factor of two of measured values. Laboratory-based phytotoxicity relationships could not accurately predict field-based phytotoxicity responses.

Effects of Biosolids Application on Pasture and Grape Vines in South-Eastern Australia

Biosolids were applied to a pasture and a vineyard in south-eastern Australia. At both sites, soil Cd, Cu, and Zn concentrations linearly increased with biosolids application rates although not to the extent of exceeding soil quality guidelines. Biosolids marginally increased soil C and N concentrations at the pasture site but significantly increased P concentrations. With lower overall soil fertility at the vineyard, biosolids increased C, N, and P concentrations. At neither site did biosolids application affect soil microbial endpoints. Biosolids increased pasture production compared to the unfertilised control but had little effect on grape production or quality. Interestingly, over the 3-year trial, there was no difference in pasture production between the biosolids treated plots and plots receiving inorganic fertiliser. These results suggest that biosolids could be used as a fertiliser to stimulate pasture production and as a soil conditioner to improve vineyard soils in this region.