Diane Renee Demers

Dynamo-free plasma in the reversed-field pinch : Advances in understanding the reversed-field pinch improved confinement mode

Generation and sustainment of the reversed field pinch (RFP) magnetic configuration normally relies on dynamo activity. The externally applied electric field tends to drive the equilibrium away from the relaxed, minimum energy state which is roughly described by a flat normalized parallel current density profile and is at marginal stability to tearing modes. Correlated fluctuations of magnetic field and velocity create a dynamo electric field which broadens the parallel current density profile, supplying the necessary edge current drive. These pervasive magnetic fluctuations are also responsible for destruction of flux surfaces, relegating the standard RFP to a stochastic-magnetic transport-limited device. Application of a tailored electric field profile (which matches the relaxed current density profile) allows sustainment of the RFP configuration without dynamo-driven edge current. The method used to ascertain that a dynamo-free RFP plasma has been created is reported here in detail. Several confinement...

Overview of results in the MST reversed field pinch experiment

Confinement in the reversed field pinch (RFP) has been shown to increase strongly with current profile control. The MST RFP can operate in two regimes: the standard regime with a naturally occurring current density profile, robust reconnection and dynamo activity; and the improved confinement regime with strong reduction in reconnection, dynamo and transport. New results in standard plasmas include the observation of a strong two-fluid Hall effect in reconnection and dynamo, the determination that the m = 0 edge resonant mode is nonlinearly driven, and the determination that tearing modes can lock to the wall via eddy currents in the shell. New results in improved confinement plasmas include observations that such plasmas are essentially dynamo-free, contain several isolated magnetic islands (as opposed to a stochastic field) and contain reduced high frequency turbulence. Auxiliary current drive and heating is now critical to RFP research. In MST, a programme to apply auxiliary systems to the RFP is underway and progress has accrued in several techniques, including lower hybrid and electron Bernstein wave injection, ac helicity injection current drive, pellet injection and neutral beam injection.

Resolving small signal measurements in experimental plasma environments using calibrated subtraction of noise signals.

The performance of many diagnostic and control systems within fusion and other fields of research are often detrimentally affected by spurious noise signals. This is particularly true for those (such as radiation or particle detectors) working with very small signals. Common sources of radiated and conducted noise in experimental fusion environments include the plasma itself and instrumentation. The noise complicates data analysis, as illustrated by noise on signals measured with the heavy ion beam probe (HIBP) installed on the Madison Symmetric Torus. The noise is time-varying and often exceeds the secondary ion beam current (in contrast with previous applications). Analysis of the noise identifies the dominant source as photoelectric emission from the detectors induced by ultraviolet light from the plasma. This has led to the development of a calibrated subtraction technique, which largely removes the undesired temporal noise signals from data. The advantages of the technique for small signal measurement applications are demonstrated through improvements realized on HIBP fluctuation measurements.

Recent improvements in confinement and beta in the MST reversed-field pinch

In the general area of confinement improvement and concept advancement, recent results in the Madison Symmetric Torus (MST) reversed-field pinch (RFP) include good confinement of both thermal and large-orbit ions and near doubling of total beta to 26% with deuterium pellet injection. Current profile control enables MST to reduce stochastic transport and achieve tokamak-like confinement. In standard RFP operation, substantial MHD tearing mode activity results in stochastic transport and an energy confinement time of about 1 ms in MST. Application of inductive current profile control reduces MHD activity and accompanying stochasticity, improving confinement by about a factor of ten. Previous work concentrated on electron confinement in improved-confinement RFP operation. Recent work confirms that ions are also well confined, and that high beta and improved confinement can be achieved simultaneously. PACS numbers: 52.55.Hc, 52.55.Dy (Some figures in this article are in colour only in the electronic version)

Control of secondary electrons from ion beam impact using a positive potential electrode

Secondary electrons emitted when an ion beam impacts a detector can amplify the ion beam signal, but also introduce errors if electrons from one detector propagate to another. A potassium ion beam and a detector comprised of ten impact wires, four split-plates, and a pair of biased electrodes were used to demonstrate that a low-voltage, positive electrode can be used to maintain the beneficial amplification effect while greatly reducing the error introduced from the electrons traveling between detector elements.

Development of a beam ion velocity detector for the heavy ion beam probe

In an axisymmetric plasma, the conservation of canonical angular momentum constrains heavy ion beam probe (HIBP) trajectories such that measurement of the toroidal velocity component of secondary ions provides a localized determination of the poloidal flux at the volume where they originated. We have developed a prototype detector which is designed to determine the beam angle in one dimension through the detection of ion current landing on two parallel planes of detecting elements. A set of apertures creates a pattern of ion current on wires in the first plane and solid metal plates behind them; the relative amounts detected by the wires and plates determine the angle which beam ions enter the detector, which is used to infer the toroidal velocity component. The design evolved from a series of simulations within which we modeled ion beam velocity changes due to equilibrium and fluctuating magnetic fields, along with the ion beam profile and velocity dispersion, and studied how these and characteristics such as the size, cross section, and spacing of the detector elements affect performance.

Heavy ion beam probe operation in time varying equilibria of improved confinement reversed field pinch discharges

Operation of a heavy ion beam probe (HIBP) on a reversed field pinch is unique from other toroidal applications because the magnetic field is more temporal and largely produced by plasma current. Improved confinement, produced through the transient application of a poloidal electric field which leads to a reduction of dynamo activity, exhibits gradual changes in equilibrium plasma quantities. A consequence of this is sweeping of the HIBP trajectories by the dynamic magnetic field, resulting in motion of the sample volume. In addition, the plasma potential evolves with the magnetic equilibrium. Measurement of the potential as a function of time is thus a combination of temporal changes of the equilibrium and motion of the sample volume. A frequent additional complication is a nonideal balance of ion current on the detectors resulting from changes in the beam trajectory (magnetic field) and energy (plasma potential). This necessitates use of data selection criteria. Nevertheless, the HIBP on the Madison Symmetric Torus has acquired measurements as a function of time throughout improved confinement. A technique developed to infer the potential in the improved confinement reversed field pinch from HIBP data in light of the time varying plasma equilibrium will be discussed.

Port hole perturbations to the magnetic field in MST

Axisymmetric magnetic equilibrium reconstruction is insufficient for describing several effects in the Madison Symmetric Torus (MST). Inclusion of the field error produced by port holes in the close-fitting conducting vacuum chamber enables accurate interpretation of data from several subsystems, in particular, ion trajectories of a heavy ion beam probe and radial displacement and distortion of power deposition from RF antenna heating. In this work, an analytic solution for the magnetic field error produced by a port hole is added to the equilibrium. Without inclusion, the beam trajectory can deviate by over a centimeter (on the order of the detector width) at the analyzer apertures. In addition, the deposition layer for an electron Bernstein wave is strongly altered up to one port diameter away from the port hole.

Computer simulation of three-dimensional heavy ion beam trajectory imaging techniques used for magnetic field estimation

A magnetic field mapping technique via heavy ion beam trajectory imaging is being developed on the Madison Symmetric Torus reversed field pinch. This paper describes the computational tools created to model camera images of the light emitted from a simulated ion beam, reconstruct a three-dimensional trajectory, and estimate the accuracy of the reconstruction. First, a computer model is used to create images of the torus interior from any candidate camera location. It is used to explore the visual field of the camera and thus to guide camera parameters and placement. Second, it is shown that a three-dimensional ion beam trajectory can be recovered from a pair of perspectively projected trajectory images. The reconstruction considers effects due to finite beam size, nonuniform beam current density, and image background noise. Third, it is demonstrated that the trajectory reconstructed from camera images can help compute magnetic field profiles, and might be used as an additional constraint to an equilibrium reconstruction code, such as MSTFit.

Noise mitigation methods for ion detectors operating with a direct view of high temperature plasmas

We have developed an ion current measurement instrument with a direct view of a plasma that reduces the particle and radiation-induced noise current it detects by over three orders of magnitude, from tens of microamps to tens of nanoamps. This is accomplished using electric fields, magnetic fields, and physical shielding that limit the flux of particles and radiation into the instrument and suppress the secondary electrons produced within it by particle and radiation impact. Operation of this detector in various configurations, without an ion beam, has allowed identification of the sources of noise current. In our experimental setup, the largest noise contributors were found to be plasma ions and photoelectric emission due to UV radiation.