Diogo E.V. Andrade

The yielding and the linear-to-nonlinear viscoelastic transition of an elastoviscoplastic material

Elastoviscoplastic materials present a transition from a gel-like to a liquidlike state induced by shearing: While the first is primarily elastic, the second is predominantly viscous. The point that characterizes this transition is usually known as the yield point, which is associated to critical quantities such as yield stress and/or yield strain. Another characteristic of elastoviscoplastic materials is the transition from linear to nonlinear viscoelasticity. In the current work, a commercial hair gel, which is an elastoviscoplastic material, was tested in two rotational rheometers in order to evaluate these two transition points. Stress oscillatory amplitude sweeps at different frequencies were performed and a Fourier-Transform analysis was applied to the results in order to determine the linear viscoelastic limit. The linear viscoelastic limit stresses and strains at different frequencies were then compared to quantities that are usually associated to the yield point: The extrapolated zero-shear-rate ...

Non-monotonic response of waxy oil gel strength to cooling rate

The oil at high temperatures in the reservoir loses heat to the surroundings and is submitted to different shear stresses while it is produced and transported. Thermal and shear histories have great influence on the rheological characteristics of waxy oils at low temperature. Wax crystals precipitate during cooling, building up a percolated matrix that entraps the oil and consequently, forms a gel-like structure. One of the main parameters that affect the crystals’ morphology and therefore the gel strength is the cooling rate. Although the oil static cooling has been widely studied in the literature, many questions are still open. The current work analyzes the influence of the cooling rate on the gel strength and on the dynamic moduli (G′ and G″) of a waxy model oil. Microscopic images of wax crystals were obtained and a hypothesis to explain the non-monotonic response of the rheological parameters as a function of the cooling rate is proposed based on the crystals’ morphology.