Dmitry Suyatin

Biofuel cell as a power source for electronic contact lenses.

Here we present unequivocal experimental proof that microscale cofactor- and membrane-less, direct electron transfer based enzymatic fuel cells do produce significant amounts of electrical energy in human lachrymal liquid (tears). 100 μm diameter gold wires, covered with 17 nm gold nanoparticles, were used to fashion three-dimensional nanostructured microelectrodes, which were biomodified with Corynascus thermophilus cellobiose dehydrogenase and Myrothecium verrucaria bilirubin oxidase as anodic and cathodic bioelements, respectively. The following characteristics of miniature glucose/oxygen biodevices operating in human tears were registered: 0.57 V open-circuit voltage, about 1 μW cm(-2) maximum power density at a cell voltage of 0.5 V, and more than 20 h operational half-life. Theoretical calculations regarding the maximum recoverable electrical energy can be extracted from the biofuel and the biooxidant, glucose and molecular oxygen, each readily available in human lachrymal liquid, fully support our belief that biofuel cells can be used as electrical power sources for so called smart contact lenses.

Sulfur passivation for ohmic contact formation to InAs nanowires

We have studied the formation of ohmic contacts to InAs nanowires by chemical etching and passivation of the contact areas in an ammonium polysulfide, (NH4)2Sx, water solution. The nanowires were exposed to different dilution levels of the (NH4)2Sx solution before contact metal evaporation. A process based on a highly diluted (NH4)2Sx solution was found to be self-terminating, with minimal etching of the InAs. The stability of the contacts was investigated with electrical measurements as a function of storage time in vacuum and air.

Fifteen-piconewton force detection from neural growth cones using nanowire arrays.

We used epitaxially grown monodisperse nanowire arrays to measure cellular forces with a spatial resolution of 1 mum. Nerve cells were cultured on the array and cellular forces were calculated from the displacement of the nanowire tips. The measurements were done in situ on live cells using confocal microscopy. Forces down to 15 pN were measured on neural growth cones, showing that this method can be used to study the fine details of growth-cone dynamics.

Nanowire-Based Electrode for Acute In Vivo Neural Recordings in the Brain

We present an electrode, based on structurally controlled nanowires, as a first step towards developing a useful nanostructured device for neurophysiological measurements in vivo. The sensing part of the electrode is made of a metal film deposited on top of an array of epitaxially grown gallium phosphide nanowires. We achieved the first functional testing of the nanowire-based electrode by performing acute in vivo recordings in the rat cerebral cortex and withstanding multiple brain implantations. Due to the controllable geometry of the nanowires, this type of electrode can be used as a model system for further analysis of the functional properties of nanostructured neuronal interfaces in vivo.

Biofuel Cell Based on Microscale Nanostructured Electrodes with Inductive Coupling to Rat Brain Neurons

Miniature, self-contained biodevices powered by biofuel cells may enable a new generation of implantable, wireless, minimally invasive neural interfaces for neurophysiological in vivo studies and for clinical applications. Here we report on the fabrication of a direct electron transfer based glucose/oxygen enzymatic fuel cell (EFC) from genuinely three-dimensional (3D) nanostructured microscale gold electrodes, modified with suitable biocatalysts. We show that the process underlying the simple fabrication method of 3D nanostructured electrodes is based on an electrochemically driven transformation of physically deposited gold nanoparticles. We experimentally demonstrate that mediator-, cofactor-, and membrane-less EFCs do operate in cerebrospinal fluid and in the brain of a rat, producing amounts of electrical power sufficient to drive a self-contained biodevice, viz. 7 μW cm−2 in vitro and 2 μW cm−2 in vivo at an operating voltage of 0.4 V. Last but not least, we also demonstrate an inductive coupling between 3D nanobioelectrodes and living neurons.

Electrical properties of self-assembled branched InAs nanowire junctions

We investigate electrical properties of self-assembled branched InAs nanowires. The branched nanowires are catalytically grown using chemical beam epitaxy, and three-terminal nanoelectronic devices are fabricated from the branched nanowires using electron-beam lithography. We demonstrate that, in difference from conventional macroscopic junctions, the fabricated self-assembled nanowire junction devices exhibit tunable nonlinear electrical characteristics and a signature of ballistic electron transport. As an example of applications, we demonstrate that the self-assembled three-terminal nanowire junctions can be used to implement the functions of frequency mixing, multiplication, and phase-difference detection of input electrical signals at room temperature. Our results suggest a wide range of potential applications of branched semiconductor nanostructures in nanoelectronics.

Rectifying and sorting of regenerating axons by free-standing nanowire patterns: a highway for nerve fibers.

We present an EBL-defined nanowire pattern that can sort axons coming from different directions on a substrate. The pattern defines tracks for left-bound traffic and right-bound traffic, which opens up new possibilities for designing neural networks on a chip.

Gallium phosphide nanowire arrays and their possible application in cellular force investigations

The authors report the fabrication of gallium phosphide nanowire arrays that can be used for cellular force measurements. The nanowire positions are defined using electron beam lithography and the nanowires are grown using metal organic vapor phase epitaxy. By varying the nanowire diameter, length, and spacing from substrate to substrate, they can expect to probe cell forces over several orders of magnitude, depending on the chosen substrate. The small diameter of the nanowires allows them to densely pack the array and to achieve unprecedented spatial resolution for future cell force-array applications.

Interfacial nanofabrication strategies in development of new functional nanomaterials and planar supramolecular nanostructures for nanoelectronics and nanotechnology

Clusters, nanoparticles, nanowires, long molecules as nanotubes and polynucleotides, and functional supramolecular nanostructures are currently considered as potential building blocks for nanotechnology and nanoelectronic devices and circuits, and development and introduction of new methods to control effectively their structure, composition and nanoscale organization are necessary. Here we describe a number of new nanofabrication methods which are based on the monolayer techniques, biomimetic principles, interfacial reactions and interactions. The methods allowed to produce new stable reproducible planar one-dimensional and two-dimensional arrays of ligand-stabilized nanoclusters and nanoparticles on solid substrates, ultrathin polymeric nanoscale-ordered mono- and multilayer quasi-crystalline and nanocomposite films, planar polymeric complex films with integrated DNA and inorganic building blocks as semiconductor and iron oxide nanoparticle quasi-linear arrays and nanowires. Transmission electron microscopy, STM and AFM techniques were used to characterize the fabricated nanostructures. Effects related to discrete electron tunneling were observed in the monolayers of nanoclusters and small gold nanoparticles at room temperature using STM.

Strong Schottky barrier reduction at Au-catalyst/GaAs-nanowire interfaces by electric dipole formation and Fermi-level unpinning

Nanoscale contacts between metals and semiconductors are critical for further downscaling of electronic and optoelectronic devices. However, realizing nanocontacts poses significant challenges since conventional approaches to achieve ohmic contacts through Schottky barrier suppression are often inadequate. Here we report the realization and characterization of low n-type Schottky barriers (~0.35 eV) formed at epitaxial contacts between Au-In alloy catalytic particles and GaAs-nanowires. In comparison to previous studies, our detailed characterization, employing selective electrical contacts defined by high-precision electron beam lithography, reveals the barrier to occur directly and solely at the abrupt interface between the catalyst and nanowire. We attribute this lowest-to-date-reported Schottky barrier to a reduced density of pinning states (~10(17) m(-2)) and the formation of an electric dipole layer at the epitaxial contacts. The insight into the physical mechanisms behind the observed low-energy Schottky barrier may guide future efforts to engineer abrupt nanoscale electrical contacts with tailored electrical properties.