Domenico Dalessandri

KPG index versus OPG measurements: a comparison between 3D and 2D methods in predicting treatment duration and difficulty level for patients with impacted maxillary canines.

Aim. The aim of this study was to test the agreement between orthopantomography (OPG) based 2D measurements and the KPG index, a new index based on 3D Cone Beam Computed Tomography (CBCT) images, in predicting orthodontic treatment duration and difficulty level of impacted maxillary canines. Materials and Methods. OPG and CBCT images of 105 impacted canines were independently scored by three orthodontists at t 0 and after 1 month (t 1), using the KPG index and the following 2D methods: distance from cusp tip and occlusal plane, cusp tip position in relation to the lateral incisor, and canine inclination. Pearsons coefficients were used to evaluate the degree of agreement and the χ 2 with Yates correction test was used to assess the independence between them. Results. Inter- and intrarater reliability were higher with KPG compared to 2D methods. Pearsons coefficients showed a statistically significant association between all the indexes, while the χ 2 with Yates correction test resulted in a statistically significant rejection of independency only for one 2D index. Conclusions. 2D indexes for predicting impacted maxillary canines treatment duration and difficulty sometimes are discordant; a 3D index like the KPG index could be useful in solving these conflicts.

Determinants for success rates of temporary anchorage devices in orthodontics: a meta-analysis (n > 50)

INTRODUCTION The aim of this study was to review the literature and evaluate the failure rates and factors that affect the stability and success of temporary anchorage devices (TADs) used as orthodontic anchorage. METHODS Data were collected from electronic databases: MEDLINE database, Scopus, and Web of Knowledge. Four combinations of term were used as keywords: screw orthodontic failure, screw orthodontic success, implant orthodontic failure, and implant orthodontic success. The following selection criteria were used to select appropriate articles: articles on implants and screws used as orthodontic anchorage, data only from human subjects, studies published in English, studies with more than 50 implants/screws, and both prospective and retrospective clinical studies. RESULTS The search provided 209 abstracts about TADs used as anchorage. After reading and applying the selection criteria, 26 articles were included in the study. The data obtained were divided into two topics: which factors affected TAD success and to what degree and in how many articles they were quoted. Clinical factors were divided into three main groups: patient-related, implant-related, and management-related factors. CONCLUSIONS Although all articles included in this meta-analysis reported success rates of greater than 80 per cent, the factors determining success rates were inconsistent between the studies analysed and this made conclusions difficult.

Reverse cycle chewing before and after orthodontic-surgical correction in class III patients

OBJECTIVE The aim of this study was to investigate the prevalence of reverse-sequence chewing cycles in skeletal class III patients before and after orthodontic-surgical therapy to evaluate whether the occlusal and skeletal correction is followed by a functional improvement. STUDY DESIGN Twenty skeletal class III patients (11 males and 9 females, 22.7 ± 3.0 years old) were recruited for this study. All patients received orthodontic and surgical treatment. Chewing cycles were recorded with a kinesiograph before (T0) and after (T1) therapy. RESULTS A significant decrease in the number of reverse chewing cycles after surgical correction was exhibited in all recordings, when chewing either soft or hard boluses, on both the right and the left side. CONCLUSIONS Evaluation of the prevalence of reverse chewing cycles could be considered an indicator of functional adaptation after therapy and a method for the early detection of nonresponding patients who may require further consideration using a different approach.

Effectiveness of an indirect bonding technique in reducing plaque accumulation around braces

OBJECTIVE To evaluate if the use of an indirect braces bonding protocol for localized enamel etching and adhesive application could help reduce plaque accumulation and demineralization around the brackets compared with a conventional direct-bonding technique. MATERIALS AND METHODS Thirty patients were bonded with a split-mouth approach: two randomly selected opposite quadrants were used as the test sides and the other two as control sides. During the first 6 months, the plaque presence around the braces was recorded monthly according to a plaque accumulation index (PAI), as was the presence of demineralization. PAI values were measured at each of the four bracket sides for every bonded tooth. Analysis of variance was used to identify significant differences between different bracket margins and between test and control sides. RESULTS Test and control sides differed significantly for PAI measurements from t(1) (1 month after bonding) to t(4) (4 months after bonding), with the highest value of significance (P < .001) at t(1) but with no significant differences from t(5) to t(7) (treatment end). Considering whole-mouth results, different bracket margin PAI scores did not differ significantly. PAI scores were higher at t(1) and progressively decreased during the treatment. At debonding, the onset of 21 new white spots was recorded overall for the control sides and eight new white spots for the test sides. CONCLUSION Especially during the first 4 months after brackets placement, this indirect bonding protocol allowed for significant reduction in plaque accumulation around the braces and reduced onset of white spots during the orthodontic treatment.

Effects of therapy on masseter activity and chewing kinematics in patients with unilateral posterior crossbite

OBJECTIVE To describe the effects of therapy on masseter activity and chewing kinematic in patients with unilateral posterior crossbite (UPC). DESIGN Fifty children (age: mean ± SD: 9.1 ± 2.3 years) with UPC (34 on the right side, 16 on the left side) and twenty children (age: 9.5 ± 2.6 years) with normal occlusion were selected for the study. The mandibular motion and the muscular activity during chewing soft and hard boli were simultaneously recorded, before and after correction with function generating bite, after a mean treatment time of 7.3 ± 2.4 months plus the retention time of 5-6 months. The percentage of reverse cycles and the percent difference between ipsilateral and contralateral peaks of the masseter electromyography envelopes were computed. RESULTS Before therapy, the percentage of reverse cycles during chewing on the crossbite side was greater in patients than in controls (P<0.001) and significantly reduced after therapy (P<0.001) towards the reference normal value (soft bolus; pre: 57 ± 30%, post:12 ± 17%; hard bolus; pre: 65 ± 34%, post: 12 ± 13%; reference value: soft bolus 4 ± 2%, hard bolus 5 ± 3%). Before therapy the percent difference between electromyography envelope peaks in patients was lower than in controls (P<0.01) and significantly increased after therapy (P<0.05) becoming similar to the reference normal value. CONCLUSIONS The correction induced a normal-like coordination of masseter muscles activity together with a significant reduction of the reverse chewing patterns. The previous altered muscular activation corresponded to the altered kinematics of reverse chewing cycles that might be considered a useful indicator of the severity of the masticatory function involvement.

Impacted and transmigrant mandibular canines incidence, aetiology, and treatment: a systematic review.

Background The incidence of impacted and transmigrant mandibular canines in the mandible is not as high as that in the maxilla; consequently, it is more difficult to find clinical guidelines derived from sound studies based on large patient samples. Objectives The aim of this systematic review was to summarize currently available data pertaining to the incidence and aetiology of impacted and transmigrant mandibular canines and the success rates of different treatment strategies. Methods This review was registered with PROSPERO (CRD42014006175) and was conducted using PRISMA and CRD (Centre for Reviews and Dissemination, University of York) statement. A computerized search of studies published up to February 2016 was conducted using the following databases: PubMed, Cochrane Central Register of Controlled Clinical trials, ISI Web of Knowledge, and Scopus. To identify any relevant publications not included in this list, we manually searched the references lists of the selected articles. The Newcastle-Ottawa Scale quality assessment tool was utilized to classify the included articles. Results In total, 630 articles were identified after the removal of duplicates. A total of 13 studies published between 2001 and 2015 met all the eligibility criteria and were included for the final analysis. The sample size in these studies ranged from 14 to 112873 teeth, while their methodological quality ranged from low to medium. Conclusions According to the findings from our review, the incidence of canine impaction in the mandible ranges from 0.92 to 5.1 per cent, while that of canine transmigration ranges from 0.1 to 0.31 per cent. Various etiologies may play a role, including odontomes (up to 20 per cent) and lateral incisor anomalies (16 per cent). Surgical extraction (89 per cent in some studies) and orthodontic traction (20-32 per cent) are the most commonly used treatment strategies, with the latter showing a failure rate of 17 per cent in two studies.

Reliability of a Novel CBCT-Based 3D Classification System for Maxillary Canine Impactions in Orthodontics: The KPG Index

The aim of this study was to evaluate both intra- and interoperator reliability of a radiological three-dimensional classification system (KPG index) for the assessment of degree of difficulty for orthodontic treatment of maxillary canine impactions. Cone beam computed tomography (CBCT) scans of fifty impacted canines, obtained using three different scanners (NewTom, Kodak, and Planmeca), were classified using the KPG index by three independent orthodontists. Measurements were repeated one month later. Based on these two sessions, several recommendations on KPG Index scoring were elaborated. After a joint calibration session, these recommendations were explained to nine orthodontists and the two measurement sessions were repeated. There was a moderate intrarater agreement in the precalibration measurement sessions. After the calibration session, both intra- and interrater agreement were almost perfect. Indexes assessed with Kodak Dental Imaging 3D module software showed a better reliability in z-axis values, whereas indexes assessed with Planmeca Romexis software showed a better reliability in x- and y-axis values. No differences were found between the CBCT scanners used. Taken together, these findings indicate that the application of the instructions elaborated during this study improved KPG index reliability, which was nevertheless variously influenced by the use of different software for images evaluation.

AQP1 expression in human gingiva and its correlation with periodontal and peri-implant tissue alterations

Aquaporins (AQPs) are a family of hydrophobic integral membrane proteins that function as transmembrane channels and play an important role in tissue homeostasis. Aquaporin-1 (AQP1), in particular, has been reported to be involved in several biological processes including inflammation, angiogenesis, wound healing and others. Periodontitis and peri-implantitis can be defined as inflammatory processes that affect the tissues surrounding a tooth or an osseointegrated implant, respectively. To date, there are limited data about the involvement of AQPs in these diseases. The aim of this study was to evaluate the possible link between the histomorphological alterations and the expression of AQP1 in healthy, pathological and healed periodontal and peri-implant gingival tissues. The results obtained showed that changes in organization of collagen fibers were observed in periodontitis and peri-implantitis, together with an increase in the percentage of area occupied by inflammatory cell infiltration and an increase of AQP1 immunostaining, which was located in the endothelial cells of the vessels within the lamina propria. Moreover, in healed periodontal and peri-implant mucosa a restoration of histomorphological alterations was observed together with a concomitant decrease of AQP1 immunostaining. These data suggested a possible link between the degree of inflammatory state and the presence of AQP1, where the latter could be involved in the chain of inflammatory reactions triggered at periodontal and peri-implant levels.

Incisal Apical Root Resorption Evaluation after Low-Friction Orthodontic Treatment Using Two-Dimensional Radiographic Imaging and Trigonometric Correction.

BACKGROUND Root resorption shall be taken into consideration during every orthodontic treatment, and it can be effected by the use of different techniques, such as the application of low friction mechanics. However, its routinely assessment on orthopantomography has limitations related to distortions and changes in dental inclination. AIM The aim of this investigation was to evaluate the severity of apical root resorption of maxillary and mandibular incisors after low-friction orthodontic treatment, using the combination of panoramic and lateral radiographs, and applying a trigonometric correction. SETTINGS AND DESIGN A hospital based Retrospective study at the orthodontic Department (Dental School, University of Brescia, Spedali Civili di Brescia, Brescia, Italy). MATERIALS AND METHODS Ninety-three subjects (53 females and 40 males; mean age, 14 years) with mild teeth crowding were treated without extractions by the same operator using a low-friction fixed appliance following an integrated straight wire (ISW) protocol. The pre- and post-treatment tooth lengths of the maxillary and mandibular incisors were measured on panoramic radiographs. A trigonometric factor of correction for the pre-treatment length was calculated based on the difference between the pre and post-treatment incisal inclination on lateral cephalograms. STATISTICAL ANALYSIS The changes in lengths were investigated using the Students t-test for paired values (p<0.05). RESULTS Maxillary central incisors showed no changes (0.3%, 0.6%), maxillary lateral incisors showed a small increase (1.4%, 1.8%) that was attributed to the completion of root development in younger patients, mandibular central and lateral incisors underwent slight resorption (-3.1%, -3.4%). A statistically significant difference was found for the mandibular incisors but not for the maxillary ones. CONCLUSION In patients with mild crowding and consequent low amount of root movement, a low-friction orthodontic treatment can lead to slight apical root resorption, mainly involving lower incisors. The use of a trigonometric correction in the panoramic radiograph analysis may reduce the limitations of this 2D evaluation.

Torque Loss After Miniscrew Placement: An In-Vitro Study Followed by a Clinical Trial.

To evaluate torque loss a week after insertion, both in an in vivo and an in vitro experimental setup were designed. In the in vivo setup a total of 29 miniscrews were placed in 20 patients who underwent orthodontic treatment. Maximum insertion torque (MIT) was evaluated at insertion time (T1). A week later, insertion torque was measured again by applying a quarter turn (T2); no load was applied on the screw during the first week. In the in vitro setup a total of 20 miniscrews were placed in pig rib bone samples. MIT was evaluated at insertion time (T1). Bone samples were kept in saline solution and controlled environment for a week during which the solution was refreshed every day. Afterwards, torque was measured again by applying a quarter turn (T2). The comparison of MIT over time was done calculating the percentage difference of the torque values between pre- and post-treatment and using the parametric two independent samples t-test or the non-parametric Mann–Whitney test. After a week unloaded miniscrews showed a mean loss of rotational torque of 36.3% and 40.9% in in vitro and in in vivo conditions, respectively. No statistical differences were found between the two different setups. Torque loss was observed after the first week in both study models; in vitro experimental setup provided a reliable study model for studying torque variation during the first week after insertion.