Domiziano Mostacci

Prediction of 89Zr production using the Monte Carlo code FLUKA

The widely used Monte Carlo simulation code FLUKA has been utilized to prototype a solid target for the production of (89)Zr by irradiation of a metallic (89)Y target foil in a 16.5MeV proton biomedical cyclotron, through the reaction (89)Y(p, n)(89)Zr. Simulations were performed with and without an Al energy degrader. In the setup of the geometry of the target, state of the art support tools, like SimpleGeo, were used for accurate, detailed modeling. The results permitted a quick assessment of all possible radionuclidic contaminants and confirmed that the use of an energy degrader avoids production of the most important impurity, (88)Zr. The estimated value for the activity produced in one hour of irradiation at 20μA is 384 ± 42MBq; this is encouraging, indicating possible production of clinically significant amounts of activity with the relatively simple target setup adopted. Initial experimental tests gave results in excellent agreement with simulations, confirming the usefulness and accuracy of FLUKA as a tool for the design and optimization of targets for the production of PET radionuclides.

Comparison of radioactivity data measured in PM10 aerosol samples at two elevated stations in northern Italy during the Fukushima event

The follow-up of Fukushima radioactive plume resulting from the 11th March 2011 devastating tsunami is discussed for two Italian stations in the northern Apennines: Mt. Cimone (Modena) and Montecuccolino (Bologna). Radioactivity data collected at both stations are described, including comparison between local natural background of airborne particulate and artificial radioactivity referable to the arrival of the radioactive plume and its persistence and evolution. Analysis of back-trajectories was used to confirm the arrival of artificial radionuclides following atmospheric transport and processing. The Fukushima plume was first detected on 3rd April 2011 when high volume sampling revealed the presence of the artificial radionuclides (131)I, (137)Cs and (134)Cs. The highest activity concentrations of these nuclides were detected on 5th April 2011 at the Montecuccolino site. Fukushima radioactivity data at the two stations were usually comparable, suggesting a good vertical mixing of the plume; discrepancies were occasional and attributed to different occurrence of wet removal, typically characterized by a scattered spatial pattern. To understand the relevance to the local population of the extra dose due to the Fukushima plume, atmospheric activities of the related artificial nuclides were compared to those of the main natural radionuclides in ambient particulate, and found to be lower by over one order of magnitude. Radiation doses referable to Fukushima, maximized for a whole year occurrence at the highest activity level observed at our stations in the weeks affected by the Japanese plume, were estimated at 1.1 μSv/year.

A compact neutron beam generator system designed for prompt gamma nuclear activation analysis

In this work a compact system was designed for bulk sample analysis using the technique of PGNAA. The system consists of (252)Cf fission neutron source, a moderator/reflector/filter assembly, and a suitable enclosure to delimit the resulting neutron beam. The moderator/reflector/filter arrangement has been optimised to maximise the thermal neutron component useful for samples analysis with a suitably low level of beam contamination. The neutron beam delivered by this compact system is used to irradiate the sample and the prompt gamma rays produced by neutron reactions within the sample elements are detected by appropriate gamma rays detector. Neutron and gamma rays transport calculations have been performed using the Monte Carlo N-Particle transport code (MCNP5).

EBT2 dosimetry of x-rays produced by the electron beam from a Plasma Focus for medical applications

The electron beam emitted from the back of Plasma Focus devices is being studied as a radiation source for intraoperative radiation therapy applications. A Plasma Focus device is being developed to this aim, to be utilized as an x-ray source. The electron beam is driven to impinge on 50 μm brass foil, where conversion x-rays are generated. Measurements with gafchromic film are performed to analyse the attenuation of the x-rays beam and to predict the dose given to the culture cell in radiobiological experiments to follow.

A range-based method to calibrate a magnetic spectrometer measuring the energy spectrum of the backward electron beam of a plasma focus

The electron beam emitted from the back of plasma focus devices is being studied as a radiation source for intraoperative radiation therapy applications. A plasma focus device is being developed for this purpose, and there is a need for characterizing its electron beam, particularly, insofar as the energy spectrum is concerned. The instrument used is a magnetic spectrometer. To calibrate this spectrometer, a procedure relying on the energy-range relation in Mylar® has been devised and applied. By measuring the transmission through increasing thicknesses of the material, electron energies could be assessed and compared to the spectrometer readings. Thus, the original calibration of the instrument has been extended to higher energies and also to better accuracy. Methods and results are presented.

Detailed dose distribution prediction of Cf-252 brachytherapy source with boron loading dose enhancement

The purpose of this work is to evaluate the dose rate distribution and to determine the boron effect on dose rate distribution for (252)Cf brachytherapy source. This study was carried out using a Monte Carlo simulation. To validate the Monte Carlo computer code, the dosimetric parameters were determined following the updated TG-43 formalism and compared with current literature data. The validated computer code was then applied to evaluate the neutron and photon dose distribution and to illustrate the boron loading effect.

Radiation protection of PFMA-1, a plasma focus for medical applications.

A plasma focus is being developed for breeding short-lived radionuclides. The different radiation protection issues and concerns posed by the machine once in operation are analysed and discussed. Activation is shown to be totally negligible and likewise neutron emission is found to pose no concern at all. The only source of radiation risk is found to rest in the radionuclides produced, 18F and 15 O, generating a peak exposure of 1.114 Sv y(-1) at the distance of closest approach of 2.5 m. Shielding to protect against this hazard is calculated to be 5 cm Pb or 54 cm concrete for the operation area and 5.5 cm Pb for the transportation flask.

Dispersion relations in weakly degenerate plasmas

From a quantum mechanical point of view, electrons in laser produced plasmas can be regarded as weakly degenerate. For instance, for a plasma with electron density of 1022 cm−3 and electron temperature of 1 eV, Sommerfelds parameter is between 1 and 2. Under these conditions the usual dispersion relations for waves in plasmas need be corrected to account for degeneracy. In the present work, starting from the transport equation with a simplified version of the Boltzmann–Uehling–Uhlenbeck collision kernel the propagation of waves impinging on a plasma with weakly degenerate electrons is investigated and dispersion relations accounting for degeneracy are derived. These dispersion relations give the classical ones in the limit for Sommerfelds parameter approaching zero. A shift of the wavenumber value and a non-collisional damping due to degeneracy effects are predicted which render a weakly degenerate plasma more opaque to radiation than a non-degenerate one.

A Derivation of Quantum Kinetic Equation from Bohm Potential

In Bohms interpretation of Quantum Mechanics, quantum effects are governed by a “quantum potential” (known as Bohm potential), and particles follow definite trajectories. In the present work, Liouvilles theorem is invoked, an appropriate Liouville equation is derived, and following the BBGKY method a quantum kinetic equation (QKE) is derived. To demonstrate the working of the QKE, two examples of application are presented: the thermal equilibrium of a quantum gas and the propagation of disturbances in a force free gas of non-interacting bosons. In contrast to the classical collisionless Boltzmann equation, waves are found to be possible in the absence of interaction or external forces, due only to Bohm potential (zero sound propagation).

Calibration with MCNP of NaI detector for the determination of natural radioactivity levels in the field

In view of assessing natural radioactivity with on-site quantitative gamma spectrometry, efficiency calibration of NaI(Tl) detectors is investigated. A calibration based on Monte Carlo simulation of detector response is proposed, to render reliable quantitative analysis practicable in field campaigns. The method is developed with reference to contact geometry, in which measurements are taken placing the NaI(Tl) probe directly against the solid source to be analyzed. The Monte Carlo code used for the simulations was MCNP. Experimental verification of the calibration goodness is obtained by comparison with appropriate standards, as reported. On-site measurements yield a quick quantitative assessment of natural radioactivity levels present ((40)K, (238)U and (232)Th). On-site gamma spectrometry can prove particularly useful insofar as it provides information on materials from which samples cannot be taken.