Don M. Payne

Liquid crystal based active optics

Liquid crystal spatial light modulators, lenses, and bandpass filters are becoming increasingly capable as material and electronics development continues to improve device performance and reduce fabrication costs. These devices are being utilized in a number of imaging applications in order to improve the performance and flexibility of the system while simultaneously reducing the size and weight compared to a conventional lens. We will present recent progress at Sandia National Laboratories in developing foveated imaging, active optical (aka nonmechanical) zoom, and enhanced multi-spectral imaging systems using liquid crystal devices.

Non-mechanical zoom system

In order to optically vary the magnification of an imaging system, mechanical zoom lenses, such as those found on 35mm cameras, require multiple optical elements and use cams or gears to adjust the spacing between individual or groups of lenses. By incorporating active elements in the optical design, we can eliminate the need to change lens separations and create an imaging system with variable optical magnification that has no macroscopic moving parts.

Active zoom imaging for operationally responsive space

Deployment costs of large aperture systems in space or near-space are directly related to the weight of the system. In order to minimize the weight of conventional primary mirrors and simultaneously achieve an agile system that is capable of a wider field-of-view (FOV) and true optical zoom without macroscopic moving parts, we are proposing a revolutionary alternative to conventional zoom systems where moving lenses/mirrors and gimbals are replaced with lightweight carbon fiber reinforced polymer (CFRP) variable radius-of-curvature mirrors (VRMs) and MEMS deformable mirrors (DMs). CFRP and MEMS DMs can provide a variable effective focal length, generating the flexibility in system magnification that is normally accomplished with mechanical motion. By adjusting the actuation of the CFRP VRM and MEMS DM in concert, the focal lengths of these adjustable elements, and thus the magnification of the whole system, can be changed without macroscopic moving parts on a millisecond time scale. In addition, adding optical tilt and higher order aberration correction will allow us to image off-axis, providing additional flexibility. Sandia National Laboratories, the Naval Research Laboratory, Narrascape, Inc., and Composite Mirror Applications, Inc. are at the forefront of active optics research, leading the development of active systems for foveated imaging, active optical zoom, phase diversity, and actively enhanced multi-spectral imaging. Integrating active elements into an imaging system can simultaneously reduce the size and weight of the system, while increasing capability and flexibility. In this paper, we present recent progress in developing active optical (aka nonmechanical) zoom and MEMS based foveated imaging for active imaging with a focus on the operationally responsive space application.

Transmissive spatial light modulators with high figure-of- merit liquid crystals for foveated imaging applications

Unique liquid crystal (LC) spatial light modulators (SLM) are being developed for foveated imaging systems that provide wide field-of-view (FOV) coverage (±60° in azimuth and elevation) without requiring gimbals or other mechanical scanners. Recently, a transmissive-SLM- based system operating in the visible (532 nm) has been demonstrated. The LC SLM development is addressing implementation issues through the development of high figure-of-merit (FoM) LC materials and transmissive high-resolution SLMs. Transmissive SLM operation allows the foveated imaging configuration to be very compact using a very simple lens system. The reduction in the size, weight and cost of the imaging optics and in data acquisition/processing hardware makes the foveated approach attractive for small platforms such as unmanned airborne vehicles (UAVs) or missile seekers.

Liquid crystal technology for adaptive optics: an update

The idea of using liquid crystal devices as an adaptive optics component has been proposed by several authors. In recent years a vigorous research effort has been carried out, and it is still flourishing, in several countries. Mainly the research and experimental work has been concentrated in the USA, U.K. and Russia. There are several reasons why liquid crystals may represent a valid alternative to the traditional deformable mirror technology that has been used for the past two decades or so. The main attractiveness of LC resides in the cost. Current deformable mirror technology has a range of price going from

EAGLE: relay mirror technology development

2K to

A lightweight adaptive telescope

15K per channel. LC technology promises to be at least a couple of orders of magnitude cheaper. Other reasons are connected with reliability, low power consumption and with a huge technological momentum based on a wide variety of industrial applications. In this paper we present some preliminary characterizations of a new, large format device. Such devices have the potential for extremely high-resolution wave-front control due to the over 10,000 corrective elements. The characterization of the device, so far, consists of measurements of the overall optical quality and of the phase control relationship

Progress report of USAF Research Laboratory liquid crystal AO program

EAGLE (Evolutionary Air & Space Global Laser Engagement) is the proposed high power weapon system with a high power laser source, a relay mirror constellation, and the necessary ground and communications links. The relay mirror itself will be a satellite composed of two optically-coupled telescopes/mirrors used to redirect laser energy from ground, air, or space based laser sources to distant points on the earth or space. The receiver telescope captures the incoming energy, relays it through an optical system that cleans up the beam, then a separate transmitter telescope/mirror redirects the laser energy at the desired target. Not only is it a key component in extending the range of DoDs current laser weapon systems, it also enables ancillary missions. Furthermore, if the vacuum of space is utilized, then the atmospheric effects on the laser beam propagation will be greatly attenuated. Finally, several critical technologies are being developed to make the EAGLE/Relay Mirror concept a reality, and the Relay Mirror Technology Development Program was set up to address them. This paper will discuss each critical technology, the current state of the work, and the future implications of this program.

Large dynamic range wavefront control of micromachined deformable membrane mirrors

Adaptive optics systems are commonly added onto conventional astronomical telescopes to improve the wavefront quality in the presence of atmospheric turbulence. Recent successes in the development of carbon fiber reinforced polymer telescopes have significantly reduced the weight of meter class telescopes making them portable, however, most adaptive optics systems continue to be constructed on large optical benches. The Navy Prototype Optical Interferometer is developing several 1.4 m portable telescope with internal wavefront correction. As part of this upgrade, a prototype 0.4 m aperture telescope has been constructed and a light weight, compact adaptive optics system is being developed. We present in this paper the design of an adaptive optics system for the lightweight telescope. The key to this system is the incorporation of a compact wavefront correction device and a novel collimation optic within the base of the telescope.

Wide field-of-view imaging system using a liquid crystal spatial light modulator

In this paper we present a status report of our liquid crystal (LC) adaptive optics program. Liquid crystal have been proposed to be used for adaptive optics components by several authors. We are actively pursuing a two prong approach, on one side we have built a closed loop test bed based on a 127 element nematic LC device; on the other side we are actively involved in research on the ferroelectric side of the LC devices. In this paper we present preliminary results from our testbed. The essential elements of this testbed are a Shack-Hartman based wavefront sensors with an analog reconstructor, and the 127 nematic elements from Meadowlark Optics. Some of the basic experimental parameters will be reviewed, and result will be discussed. Furthermore we will present the status of our activity in the field of ferroelectric LC. Several prototypes are under testing to establish their capabilities as AO components.