Donald M. Leek

Clusters of Superparamagnetic Iron Oxide Nanoparticles Encapsulated in a Hydrogel: A Particle Architecture Generating a Synergistic Enhancement of the T2 Relaxation

Clusters of iron oxide nanoparticles encapsulated in a pH-responsive hydrogel are synthesized and studied for their ability to alter the T(2)-relaxivity of protons. Encapsulation of the clusters with the hydrophilic coating is shown to enhance the transverse relaxation rate by up to 85% compared to clusters with no coating. With the use of pH-sensitive hydrogel, difficulties inherent in comparing particle samples are eliminated and a clear increase in relaxivity as the coating swells is demonstrated. Agreement with Monte Carlo simulations indicates that the lower diffusivity of water inside the coating and near the particle surface leads to the enhancement. This demonstration of a surface-active particle structure opens new possibilities in using similar structures for nanoparticle-based diagnostics using magnetic resonance imaging.

Unusual sculpting of dipeptide particles by ultrasound induces gelation.

A readily synthesized dipeptide shows unprecedented gelation behavior when dispersed and submitted to ultrasound in nonsolvents. SEM and FFEM revealed spectacular shape changes from a sheet-like material into a highly interconnected fiber network and ribbons while the dipeptide maintains an anti conformation inside β-sheets at the molecular scale.

Low-temperature approach to highly emissive copper indium sulfide colloidal nanocrystals and their bioimaging applications.

We report our newly developed low-temperature synthesis of colloidal photoluminescent (PL) CuInS2 nanocrystals (NCs) and their in vitro and in vivo imaging applications. With diphenylphosphine sulphide (SDPP) as a S precursor made from elemental S and diphenylphosphine, this is a noninjection based approach in 1-dodecanethiol (DDT) with excellent synthetic reproducibility and large-scale capability. For a typical synthesis with copper iodide (CuI) as a Cu source and indium acetate (In(OAc)3) as an In source, the growth temperature was as low as 160 °C and the feed molar ratios were 1Cu-to-1In-to-4S. Amazingly, the resulting CuInS2 NCs in toluene exhibit quantum yield (QY) of ~23% with photoemission peaking at ~760 nm and full width at half maximum (FWHM) of ~140 nm. With a mean size of ~3.4 nm (measured from the vertices to the bases of the pyramids), they are pyramidal in shape with a crystal structure of tetragonal chalcopyrite. In situ (31)P NMR (monitored from 30 °C to 100 °C) and in situ absorption at 80 °C suggested that the Cu precursor should be less reactive toward SDPP than the In precursor. For our in vitro and in vivo imaging applications, CuInS2/ZnS core-shell QDs were synthesized; afterwards, dihydrolipoic acid (DHLA) or 11-mercaptoundecanoic acid (MUA) were used for ligand exchange and then bio-conjugation was performed. Two single-domain antibodies (sdAbs) were used. One was 2A3 for in vitro imaging of BxPC3 pancreatic cancer cells. The other was EG2 for in vivo imaging of a Glioblastoma U87MG brain tumour model. The bioimaging data illustrate that the CuInS2 NCs from our SDPP-based low-temperature noninjection approach are good quality.

CdS magic-sized nanocrystals exhibiting bright band gap photoemission via thermodynamically driven formation.

CdS magic-sized nanocrystals (MSNs) exhibiting both band gap absorption and emission at 378 nm with a narrow bandwidth of approximately 9 nm and quantum yield (QY) of approximately 10% (total QY approximately 28%, in hexane) were synthesized via a one-pot noninjection approach. This CdS MSN ensemble is termed as Family 378. It has been acknowledged that magic-sized quantum dots (MSQDs) are single-sized, and only homogeneous broadening contributes to their bandwidth. The synthetic approach developed is ready and highly reproducible. The formation of the CdS MSQDs was carried out at elevated temperatures (such as 90-140 degrees C) for a few hours in a reaction flask containing bis(trimethylsilyl)sulfide ((TMS)(2)S) and Cd(OAc)(OA) in situ made from cadmium acetate dihydrate (Cd(OAc)(2).2H(2)O) and oleic acid (OA) in 1-octadecene (ODE). Low OA/Cd and high Cd/S feed molar ratios favor this formation, whose mechanism is proposed to be thermodynamically driven. (13)C solid-state cross-polarization magic-angle spinning (CP/MAS) nuclear magnetic resonance (NMR) demonstrates that the capping ligands are firmly attached to the nanocrystal surface via carboxylate groups. With the cross-polarization from (1)H of the alkyl chains to surface (113)Cd, (113)Cd NMR is able to distinguish the surface Cd (471 ppm) bonding to both -COO(-) and S and the bulk Cd (792 ppm) bonding to S only. DOSY-NMR was used to determine the size of Family 378 ( approximately 1.9 nm). The present study provides strategies for the rational design of various MSNs.

The ferrocene moiety as a structural probe: redox and structural properties of ferrocenoyl-oligoprolines FcPronOBzl (n=1–4) and FcPro2PheOBzl

Abstract The preparations of the five ferrocenoyl-oligopeptides, FcProOBzl (1), FcPro2OBzl (2), FcPro3OBzl (3), FcPro4OBzl (4) and FcPro2PheOBzl (5) are described. Crystallographic studies show that the Fc-oligoprolines 1–4 adopt a helical polyproline II structure having all prolines in a mutually trans-conformation. This structure is maintained in MeCN and CHCl3 solutions, as was shown by NMR methods. Chemical and magnetic similarities among the proline residues render spectral assignment by conventional 1D 1H-NMR spectroscopy impossible. However, a combination of 2D NMR techniques allowed us to unequivocally assign all signals. The redox potential of the Fc-group attached to the oligoproline chain is sensitive to the sequence and length of the oligopeptide. With growing peptide length, the molecule becomes easier to oxidize.

Methanol incorporation in clathrate hydrates and the implications for oil and gas pipeline flow assurance and icy planetary bodies

One of the best-known uses of methanol is as antifreeze. Methanol is used in large quantities in industrial applications to prevent methane clathrate hydrate blockages from forming in oil and gas pipelines. Methanol is also assigned a major role as antifreeze in giving icy planetary bodies (e.g., Titan) a liquid subsurface ocean and/or an atmosphere containing significant quantities of methane. In this work, we reveal a previously unverified role for methanol as a guest in clathrate hydrate cages. X-ray diffraction (XRD) and NMR experiments showed that at temperatures near 273 K, methanol is incorporated in the hydrate lattice along with other guest molecules. The amount of included methanol depends on the preparative method used. For instance, single-crystal XRD shows that at low temperatures, the methanol molecules are hydrogen-bonded in 4.4% of the small cages of tetrahydrofuran cubic structure II hydrate. At higher temperatures, NMR spectroscopy reveals a number of methanol species incorporated in hydrocarbon hydrate lattices. At temperatures characteristic of icy planetary bodies, vapor deposits of methanol, water, and methane or xenon show that the presence of methanol accelerates hydrate formation on annealing and that there is unusually complex phase behavior as revealed by powder XRD and NMR spectroscopy. The presence of cubic structure I hydrate was confirmed and a unique hydrate phase was postulated to account for the data. Molecular dynamics calculations confirmed the possibility of methanol incorporation into the hydrate lattice and show that methanol can favorably replace a number of methane guests.

Low-temperature approach to high-yield and reproducible syntheses of high-quality small-sized PbSe colloidal nanocrystals for photovoltaic applications.

Small-sized PbSe nanocrystals (NCs) were synthesized at low temperature such as 50-80 °C with high reaction yield (up to 100%), high quality, and high synthetic reproducibility, via a noninjection-based one-pot approach. These small-sized PbSe NCs with their first excitonic absorption in wavelength shorter than 1200 nm (corresponding to size < ∼3.7 nm) were developed for photovoltaic applications requiring a large quantity of materials. These colloidal PbSe NCs, also called quantum dots, are high-quality, in terms of narrow size distribution with a typical standard deviation of ∼7-9%, excellent optical properties with high quantum yield of ∼50-90% and small full width at half-maximum of ∼130-150 nm of their band-gap photoemission peaks, and high storage stability. Our synthetic design aimed at promotion of the formation of PbSe monomers for fast and sizable nucleation with the presence of a large number of nuclei at low temperature. For formation of the PbSe monomer, our low-temperature approach suggests the existence of two pathways of Pb-Se (route a) and Pb-P (route b) complexes. Either pathway may dominate, depending on the method used and its experimental conditions. Experimentally, a reducing/nucleation agent, diphenylphosphine, was added to enhance route b. The present study addresses two challenging issues in the NC community, the monomer formation mechanism and the reproducible syntheses of small-sized NCs with high yield and high quality and large-scale capability, bringing insight to the fundamental understanding of optimization of the NC yield and quality via control of the precursor complex reactivity and thus nucleation/growth. Such advances in colloidal science should, in turn, promote the development of next-generation low-cost and high-efficiency solar cells. Schottky-type solar cells using our PbSe NCs as the active material have achieved the highest power conversion efficiency of 2.82%, in comparison with the same type of solar cells using other PbSe NCs, under Air Mass 1.5 global (AM 1.5G) irradiation of 100 mW/cm(2).

In-situ observation of nucleation and growth of PbSe magic-sized nanoclusters and regular nanocrystals.

In-situ observation of the temporal evolution of the absorption of PbSe nanocrystals (NCs) via a low-temperature noninjection approach is presented. Based on a model reaction of lead oleate (Pb(OA)(2) ) and n-trioctylphosphine selenide (TOPSe) in 1-octadecene at 35-80 °C, the use of commercially available TOP (90 or 97%) in affecting the formation of the NCs is explored. TOPSe solutions made from TOP 90% exhibited higher reactivity than those made from TOP 97%. (31)P NMR spectroscopy detected no dioctylphosphine selenide (DOPSe) but some DOP in ≈1.0 M TOPSe/TOP solution (made from TOP 90%), as well as no diphenylphosphine selenide (DPPSe) when DPP was added to the ≈1.0 M solution. Hence, it is proposed that, for the formation of PbSe monomers, an indirect pathway dominates with the formation of a Pb-P complex/intermediate, which results from the activation of Pb(OA)(2) by a phosphine compound (such as DPP, DOP, or TOP) and in turn reacts with TOPSe. With the use of TOP 90% and the addition of secondary phosphine DPP, the formation of PbSe magic-sized nanoclusters (MSNCs) and regular NCs (RNCs) is investigated. With proper tuning of the synthesis conditions, the formation of various PbSe MSNCs versus RNCs is monitored in situ with versus without the addition of DPP, or at different reaction temperatures but otherwise identical synthetic formulation and reaction parameters. Accordingly, the degree of supersaturation (DS) of the PbSe monomer affecting the development of these PbSe MSNCs versus RNCs is proposed; the higher the DS, the more the MSNCs are favored. Also, surface-determined cluster-cluster aggregation is proposed to be the growth mechanism for both the RNCs and MSNCs. For the former, quantized growth is followed by continuous growth. For the latter, the sizes of the magic-sized families are calculated.

Inclusion complexes of coumarin in cucurbiturils.

Coumarin was found to form stable inclusion complexes with cucurbiturils. In the presence of cucurbit[7]uril (CB[7]), 1 : 1 inclusion complexes were observed in aqueous solution, as monitored by (1)H NMR and UV-visible absorption spectroscopies, and further supported by ab initio calculations, whereas with cucurbit[8]uril (CB[8]) a solid phase 1 : 2 host : guest complex was found in a single crystal X-ray diffraction structure determination.

Low-temperature noninjection approach to homogeneously-alloyed PbSe(x)S(1-x) colloidal nanocrystals for photovoltaic applications.

Homogeneously alloyed PbSe(x)S(1-x) nanocrystals (NCs) with their excitonic absorption peaks in wavelength shorter than 1200 nm were developed for photovoltaic (PV) applications. Schottky-type solar cells fabricated with our PbSe₀.₃S₀.₇ NCs as their active materials reached a high power conversion efficiency (PCE) of 3.44%, with an open circuit voltage (V(oc)) of 0.49 V, short circuit photocurrent (J(sc)) of 13.09 mA/cm², and fill factor (FF) of 0.54 under Air Mass 1.5 global (AM 1.5G) irradiation of 100 mW/cm². The syntheses of the small-sized colloidal PbSe(x)S(1-x) NCs were carried out at low temperature (60 °C) with long growth periods (such as 45 min) via a one-pot noninjection-based approach in 1-octadecene (ODE), featuring high reaction yield, high product quality, and high synthetic reproducibility. This low-temperature approach employed Pb(oleate)₂ as a Pb precursor and air-stable low-cost thioacetamide (TAA) as a S source instead of air-sensitive high-cost bis(trimethylsilyl)sulfide ((TMS)₂S), with n-tributylphosphine selenide (TBPSe) as a Se precursor instead of n-trioctylphosphine selenide (TOPSe). The reactivity difference of TOPSe made from commercial TOP 90% and TBPSe made from commercial TBP 97% and TBP 99% was addressed with in situ observation of the temporal evolution of NC absorption and with ³¹P nuclear magnetic resonance (NMR). Furthermore, the addition of a strong reducing/nucleation agent diphenylphosphine (DPP) promoted the reactivity of the Pb precursor through the formation of a Pb-P complex, which is much more reactive than Pb(oleate)₂. Thus, the reactivity of TBPSe was increased more than that of TAA. The larger the DPP-to-Pb feed molar ratio, the more the Pb-P complex, the higher the Se amount in the resulting homogeneously alloyed PbSe(x)S(1-x) NCs. Therefore, the use of DPP allowed reactivity match of the Se and S precursors and led to sizable nucleation at low temperature so that long growth periods became feasible. The present study brings insight into the formation mechanism of monomers, nucleation/growth of colloidal composition-tunable NCs, and materials design and synthesis for next-generation low-cost and high-efficiency solar cells.