Dong Men

Seeding-Induced Self-assembling Protein Nanowires Dramatically Increase the Sensitivity of Immunoassays

Aiming to build a supersensitive and easily operable immunoassay, bifunctional protein nanowires were generated by seeding-induced self-assembling of the yeast amyloid protein Sup35p that genetically fused with protein G and an enzyme (methyl-parathion hydrolase, MPH), respectively. The protein nanowires possessed a high ratio of enzyme molecules to protein G, allowing a dramatic increase of the enzymatic signal when protein G was bound to an antibody target. As a result, a 100-fold enhancement of the sensitivity was obtained when applied in the detection of the Yersinia pestis F1 antigen.

An auto-biotinylated bifunctional protein nanowire for ultra-sensitive molecular biosensing.

In order to obtain an ultra-sensitive molecular biosensor, we designed an auto-biotinylated bifunctional protein nanowire (bFPNw) based on the self-assembly of a yeast amyloid protein, Sup35, to which protein G and a biotin acceptor peptide (BAP) were genetically fused. These auto-biotinylated bFPNws can transfer hundreds of commercially available diagnostic enzymes to an antigen-antibody complex via the biotin-avidin system, greatly enhancing the sensitivity of immune-biosensing. Compared to our previously reported seeding-induced bFPNws (Men et al., 2009), these auto-biotinylated bFPNws gave greater signal amplification, reduced non-specific binding and improved stability. The auto-biotinylated self-assembled bFPNw molecular biosensors were applied to detect Yersinia pestis (Y. pestis) F1 antigen and showed a 2000- to 4000-fold increase in sensitivity compared to traditional immunoassays, demonstrating the potential use of these self-assembling protein nanowires in biosensing.

Development of Droplet Microfluidics Enabling High-Throughput Single-Cell Analysis

This article reviews recent developments in droplet microfluidics enabling high-throughput single-cell analysis. Five key aspects in this field are included in this review: (1) prototype demonstration of single-cell encapsulation in microfluidic droplets; (2) technical improvements of single-cell encapsulation in microfluidic droplets; (3) microfluidic droplets enabling single-cell proteomic analysis; (4) microfluidic droplets enabling single-cell genomic analysis; and (5) integrated microfluidic droplet systems enabling single-cell screening. We examine the advantages and limitations of each technique and discuss future research opportunities by focusing on key performances of throughput, multifunctionality, and absolute quantification.

Self-Assembly of Ferritin Nanoparticles into an Enzyme Nanocomposite with Tunable Size for Ultrasensitive Immunoassay

The self-assembly of nanoparticles into larger superstructures is a powerful strategy to develop novel functional nanomaterials, as these superstructures display collective properties that are different to those displayed by individual nanoparticles or bulk samples. However, there are increasing bottlenecks in terms of size control and multifunctionalization of nanoparticle assemblies. In this study, we developed a self-assembly strategy for construction of multifunctional nanoparticle assemblies of tunable size, through rational regulation of the number of self-assembling interaction sites on each nanoparticle. As proof-of-principle, a size-controlled enzyme nanocomposite (ENC) was constructed by self-assembly of streptavidin-labeled horseradish peroxidase (SA-HRP) and autobiotinylated ferritin nanoparticles (bFNP). Our ENC integrates a large number of enzyme molecules, together with a streptavidin-coated surface, allowing for a drastic increase in enzymatic signal when the SA is bound to a biotinylated target molecule. As result, a 10 000-fold increase in sensitivity over conventional enzyme-linked immunosorbent assays (ELISA) methods was achieved in a cardiac troponin immunoassay. Our method presented here should provide a feasible approach for constructing elaborate multifunctional superstructures of tunable size useful for a broad range of biomedical applications.

Imaging of mRNA-protein interactions in live cells using novel mCherry trimolecular fluorescence complementation systems.

Live cell imaging of mRNA-protein interactions makes it possible to study posttranscriptional processes of cellular and viral gene expression under physiological conditions. In this study, red color mCherry-based trimolecular fluorescence complementation (TriFC) systems were constructed as new tools for visualizing mRNA–protein interaction in living cells using split mCherry fragments and HIV REV-RRE and TAT-TAR peptide-RNA interaction pairs. The new mCherry TriFC systems were successfully used to image RNA–protein interactions such as that between influenza viral protein NS1 and the 5’ UTR of influenza viral mRNAs NS, M, and NP. Upon combination of an mCherry TriFC system with a Venus TriFC system, multiple mRNA–protein interactions could be detected simultaneously in the same cells. Then, the new mCherry TriFC system was used for imaging of interactions between influenza A virus mRNAs and some of adapter proteins in cellular TAP nuclear export pathway in live cells. Adapter proteins Aly and UAP56 were found to associate with three kinds of viral mRNAs. Another adapter protein, splicing factor 9G8, only interacted with intron-containing spliced M2 mRNA. Co-immunoprecipitation assays with influenza A virus-infected cells confirmed these interactions. This study provides long-wavelength-spectrum TriFC systems as new tools for visualizing RNA–protein interactions in live cells and help to understand the nuclear export mechanism of influenza A viral mRNAs.

Characterization of a monomeric heat-labile classical alkaline phosphatase from Anabaena sp. PCC7120

Alkaline phosphatases (APs), known inducible enzymes of the Pho regulon and poorly characterized in cyanobacteria, hydrolyze phosphomonoesters to produce inorganic phosphate (Pi) during Pi starvation. In this study, two predicted alkaline phosphatase genes in the genome of Anabaena sp. PCC 7120, all2843 and alr5291, were apparently induced during Pi starvation. Sequence analysis showed that alr5291 encodes a protein that is an atypical alkaline phosphatase like other cyanobacteria PhoAs, but the protein encoded by all2843 is very similar to the classical PhoAs, such as Escherichia coli alkaline phosphatase (EAP). To date, there have been no reports about classical phoA in cyanobacterial genomes. The alkaline phosphatase APA, coded by all2843, is characterized as a metalloenzyme containing Mg2+ and Zn2+ with molar ratio of 1: 2. Site-directed mutagenesis analysis indicated that, though the active center of APA is highly conserved in comparison with EAP, differences do exist between APA and EAP in metal ion coordination. Besides, biochemical analysis revealed that APA is a monomeric protein and inactivated rapidly at 50°C. These results suggest that APA is the first monomeric heat-labile classical PhoA found in cyanobacteria.

Construction of bifunctional phage display for biological analysis and immunoassay

A phage display-based bifunctional display system was developed for simple and sensitive immunoassay. The resulting bifunctional phage could simultaneously display a few single-chain variable fragment (ScFv) and many copies of the gold-binding peptide on its surface, thereby mediating antigen recognition and signal amplification. As a demonstration study, it was possible for bifunctional phage-based immunoassay to identify Bacillus anthracis spores from other Bacillus strains with detection sensitivity 10-fold higher than that of conventional phage enzyme-linked immunosorbent assay (ELISA). This protocol may be applied to build other bifunctional phage clones for broad applications (e.g., immunoassay kits, affinity biosensors, biorecognition assays).

Quantum dot-induced viral capsid assembling in dissociation buffer

Viruses encapsulating inorganic nanoparticles are a novel type of nanostructure with applications in biomedicine and biosensors. However, the encapsulation and assembly mechanisms of these hybridized virus-based nanoparticles (VNPs) are still unknown. In this article, it was found that quantum dots (QDs) can induce simian virus 40 (SV40) capsid assembly in dissociation buffer, where viral capsids should be disassembled. The analysis of the transmission electron microscope, dynamic light scattering, sucrose density gradient centrifugation, and cryo-electron microscopy single particle reconstruction experimental results showed that the SV40 major capsid protein 1 (VP1) can be assembled into ≈25 nm capsids in the dissociation buffer when QDs are present and that the QDs are encapsulated in the SV40 capsids. Moreover, it was determined that there is a strong affinity between QDs and the SV40 VP1 proteins (KD = 2.19E-10 M), which should play an important role in QD encapsulation in the SV40 viral capsids. This study provides a new understanding of the assembly mechanism of SV40 virus-based nanoparticles with QDs, which may help in the design and construction of other similar virus-based nanoparticles.

Fluorescent Protein Nanowire-Mediated Protein Microarrays for Multiplexed and Highly Sensitive Pathogen Detection

Protein microarrays are powerful tools for high-throughput and simultaneous detection of different target molecules in complex biological samples. However, the sensitivity of conventional fluorescence-labeling protein detection methods is limited by the availability of signal molecules for binding to the target molecule. Here, we built a multifunctional fluorescent protein nanowire (FNw) by harnessing self-assembly of yeast amyloid protein. The FNw integrated a large number of fluorescent molecules, thereby enhancing the fluorescent signal output in target detection. The FNw was then combined with protein microarray technology to detect proteins derived from two pathogens, including influenza virus (hemagglutinin 1, HA1) and human immunodeficiency virus (p24 and gp120). The resulting detection sensitivity achieved a 100-fold improvement over a commercially available detection reagent.

Intracellular cargo delivery by virus capsid protein-based vehicles: From nano to micro

UNLABELLED Cellular delivery is an important concern for the efficiency of medicines and sensors for disease diagnoses and therapy. However, this task is quite challenging. Self-assembly virus capsid proteins might be developed as building blocks for multifunctional cellular delivery vehicles. In this work, we found that SV40 VP1 (Simian virus 40 major capsid protein) could function as a new cell-penetrating protein. The VP1 protein could carry foreign proteins into cells in a pentameric structure. A double color structure, with red QDs (Quantum dots) encapsulated by viral capsids fused with EGFP, was created for imaging cargo delivery and release from viral capsids. The viral capsids encapsulating QDs were further used for cellular delivery of micron-sized iron oxide particles (MPIOs). MPIOs were efficiently delivered into live cells and controlled by a magnetic field. Therefore, our study built virus-based cellular delivery systems for different sizes of cargos: protein molecules, nanoparticles, and micron-sized particles. FROM THE CLINICAL EDITOR Much research is being done to investigate methods for efficient and specific cellular delivery of drugs, proteins or genetic material. In this article, the authors describe their approach in using self-assembly virus capsid proteins SV40 VP1 (Simian virus 40 major capsid protein). The cell-penetrating behavior provided excellent cellular delivery and should give a new method for biomedical applications.