Dong Young Chung

Ordered macroporous platinum electrode and enhanced mass transfer in fuel cells using inverse opal structure

Three-dimensional, ordered macroporous materials such as inverse opal structures are attractive materials for various applications in electrochemical devices because of the benefits derived from their periodic structures: relatively large surface areas, large voidage, low tortuosity and interconnected macropores. However, a direct application of an inverse opal structure in membrane electrode assemblies has been considered impractical because of the limitations in fabrication routes including an unsuitable substrate. Here we report the demonstration of a single cell that maintains an inverse opal structure entirely within a membrane electrode assembly. Compared with the conventional catalyst slurry, an ink-based assembly, this modified assembly has a robust and integrated configuration of catalyst layers; therefore, the loss of catalyst particles can be minimized. Furthermore, the inverse-opal-structure electrode maintains an effective porosity, an enhanced performance, as well as an improved mass transfer and more effective water management, owing to its morphological advantages.

Large-Scale Synthesis of Carbon-Shell-Coated FeP Nanoparticles for Robust Hydrogen Evolution Reaction Electrocatalyst

A highly active and stable non-Pt electrocatalyst for hydrogen production has been pursued for a long time as an inexpensive alternative to Pt-based catalysts. Herein, we report a simple and effective approach to prepare high-performance iron phosphide (FeP) nanoparticle electrocatalysts using iron oxide nanoparticles as a precursor. A single-step heating procedure of polydopamine-coated iron oxide nanoparticles leads to both carbonization of polydopamine coating to the carbon shell and phosphidation of iron oxide to FeP, simultaneously. Carbon-shell-coated FeP nanoparticles show a low overpotential of 71 mV at 10 mA cm-2, which is comparable to that of a commercial Pt catalyst, and remarkable long-term durability under acidic conditions for up to 10 000 cycles with negligible activity loss. The effect of carbon shell protection was investigated both theoretically and experimentally. A density functional theory reveals that deterioration of catalytic activity of FeP is caused by surface oxidation. Extended X-ray absorption fine structure analysis combined with electrochemical test shows that carbon shell coating prevents FeP nanoparticles from oxidation, making them highly stable under hydrogen evolution reaction operation conditions. Furthermore, we demonstrate that our synthetic method is suitable for mass production, which is highly desirable for large-scale hydrogen production.

Single Source Precursor-based Solvothermal Synthesis of Heteroatom-doped Graphene and Its Energy Storage and Conversion Applications

Solvothermal processes are considered efficient approaches for the gram-scale production of graphene. Further modification of graphene by chemical doping is an important approach to tailor its properties. In this work, we successfully synthesized sulfur-doped graphene by using a solvothermal method with dimethyl sulfoxide as a precursor, which is a common laboratory reagent. Nitrogen-doped graphene was produced to demonstrate the generality of this process. These heteroatom-doped graphene materials exhibited high surface areas and high contents of heteroatoms. Furthermore, the lithium-ion storage properties and oxygen reduction reaction catalytic activity of these materials were also investigated. The success of this approach might facilitate the development of other advanced graphene-based materials with relative simplicity, scalability, and cost effectiveness for use in various potential applications.

Reactively sputtered nickel nitride as electrocatalytic counter electrode for dye- and quantum dot-sensitized solar cells

Nickel nitride electrodes were prepared by reactive sputtering of nickel under a N2 atmosphere at room temperature for application in mesoscopic dye- or quantum dot- sensitized solar cells. This facile and reliable method led to the formation of a Ni2N film with a cauliflower-like nanostructure and tetrahedral crystal lattice. The prepared nickel nitride electrodes exhibited an excellent chemical stability toward both iodide and polysulfide redox electrolytes. Compared to conventional Pt electrodes, the nickel nitride electrodes showed an inferior electrocatalytic activity for the iodide redox electrolyte; however, it displayed a considerably superior electrocatalytic activity for the polysulfide redox electrolyte. As a result, compared to dye-sensitized solar cells (DSCs), with a conversion efficiency (η) = 7.62%, and CdSe-based quantum dot-sensitized solar cells (QDSCs, η = 2.01%) employing Pt counter electrodes (CEs), the nickel nitride CEs exhibited a lower conversion efficiency (η = 3.75%) when applied to DSCs, but an enhanced conversion efficiency (η = 2.80%) when applied to CdSe-based QDSCs.

Three-dimensional carbon foam/N-doped graphene@MoS2 hybrid nanostructures as effective electrocatalysts for the hydrogen evolution reaction

Molybdenum disulfide (MoS2)-based hybrid nanostructures have attracted much attention as promising alternatives to Pt-based electrocatalysts for the hydrogen evolution reaction. However, the catalytic performance of these nanostructures is limited by their poor conductivity and small surface area. Herein, using commercial three-dimensional melamine foams (MFs) as the raw material, MoS2-coated macroporous carbon foam/N-doped graphene hybrid nanostructures (CF–NG@MoS2) were prepared through a combination of graphene oxide (GO) loading on the MF framework, high-temperature carbonization, and MoS2 growth. Owing to their unique structure, the as-prepared CF–NG@MoS2 hybrids exhibited enhanced catalytic performance for the HER.

Facile and Gram-scale Synthesis of Metal-free Catalysts: Toward Realistic Applications for Fuel Cells

Although numerous reports on nonprecious metal catalysts for replacing expensive Pt-based catalysts have been published, few of these studies have demonstrated their practical application in fuel cells. In this work, we report graphitic carbon nitride and carbon nanofiber hybrid materials synthesized by a facile and gram-scale method via liquid-based reactions, without the use of toxic materials or a high pressure-high temperature reactor, for use as fuel cell cathodes. The resulting materials exhibited remarkable methanol tolerance, selectivity, and stability even without a metal dopant. Furthermore, these completely metal-free catalysts exhibited outstanding performance as cathode materials in an actual fuel cell device: a membrane electrode assembly with both acidic and alkaline polymer electrolytes. The fabrication method and remarkable performance of the single cell produced in this study represent progressive steps toward the realistic application of metal-free cathode electrocatalysts in fuel cells.

Tailoring the Electronic Structure of Nanoelectrocatalysts Induced by a Surface-Capping Organic Molecule for the Oxygen Reduction Reaction.

Capping organic molecules, including oleylamine, strongly adsorbed onto Pt nanoparticles during preparation steps are considered undesirable species for the oxygen reduction reaction due to decreasing electrochemical active sites. However, we found that a small amount of oleylamine modified platinum nanoparticles showed significant enhancement of the electrochemical activity of the oxygen reduction reaction, even with the loss of the electrochemically active surface area. The enhancement was correlated with the downshift of the frontier d-band structure of platinum and the retardation of competitively adsorbed species. These results suggest that a capping organic molecule modified electrode can be a strategy to design an advanced electrocatalyst by modification of electronic structures.

Inhibition of CO poisoning on Pt catalyst coupled with the reduction of toxic hexavalent chromium in a dual-functional fuel cell

We propose a method to enhance the fuel cell efficiency with the simultaneous removal of toxic heavy metal ions. Carbon monoxide (CO), an intermediate of methanol oxidation that is primarily responsible for Pt catalyst deactivation, can be used as an in-situ reducing agent for hexavalent chromium (Cr (VI)) with reactivating the CO-poisoned Pt catalyst. Using electro-oxidation measurements, the oxidation of adsorbed CO molecules coupled with the concurrent conversion of Cr (VI) to Cr (III) was confirmed. This concept was also successfully applied to a methanol fuel cell to enhance its performance efficiency and to remove toxic Cr (VI) at the same time.

Chemical tuning of electrochemical properties of Pt-skin surfaces for highly active oxygen reduction reactions

Pt-skin surfaces were successfully fabricated by the chemical deposition of additional Pt on corrugated Pt-Ni nanoparticles with Pt-skeleton surfaces. Compared to the Pt-skin formed by heat annealing, the chemically-tuned Pt-skin had a higher Pt coordination number and surface crystallinity, which resulted in superior ORR activity and durability.

Tuning the oxygen reduction activity of the Pt–Ni nanoparticles upon specific anion adsorption by varying heat treatment atmospheres

Heat treatment of Pt based nanoparticles under various conditions is one of the conventional ways to modify the electrocatalytic properties for enhancement of the oxygen reduction reaction (ORR). However, the effect of the heat treatment atmosphere on the ORR activity especially upon specific anion adsorption still remains unclear. This paper investigates the Pt-Ni bimetallic nanoparticles (Pt2Ni1), under various heat treatment atmospheres, as enhanced cathodic electrocatalysts for the high temperature-proton exchange membrane fuel cell (HT-PEMFC) using a phosphoric acid doped polybenzimidazole (p-PBI) membrane. The X-ray spectroscopic measurement showed the variations of the electronic structures of Pt-Ni nanoparticles under the heat treatment condition. In the half-cell measurement, the argon treated electrocatalyst demonstrated the highest catalytic activity owing to the appropriate electronic interaction between Pt and Ni. The single cell test with a p-PBI membrane, at 160 °C, also confirmed the excellent oxygen reduction reactivity and durability of the argon-treated Pt-Ni nanoparticles. This result suggested that the alteration of the electronic structure by a proper heat treatment atmosphere upon specific anion adsorption decisively influenced the ORR activity both at half-cell and single-cell scales.