Dongling Ma

Detection of adenosine triphosphate with an aptamer biosensor based on surface-enhanced Raman scattering.

A simple, ultrasensitive, highly selective, and reagent-free aptamer-based biosensor has been developed for quantitative detection of adenosine triphosphate (ATP) using surface-enhanced Raman scattering (SERS). The sensor contains a SERS probe made of gold nanostar@Raman label@SiO(2) core-shell nanoparticles in which the Raman label (malachite green isothiocyanate, MGITC) molecules are sandwiched between a gold nanostar core and a thin silica shell. Such a SERS probe brings enhanced signal and low background fluorescence, shows good water-solubility and stability, and exhibits no sign of photobleaching. The aptamer labeled with the SERS probe is designed to hybridize with the cDNA on a gold film to form a rigid duplex DNA. In the presence of ATP, the interaction between ATP and the aptamer results in the dissociation of the duplex DNA structure and thereby removal of the SERS probe from the gold film, reducing the Raman signal. The response of the SERS biosensor varies linearly with the logarithmic ATP concentration up to 2.0 nM with a limit of detection of 12.4 pM. Our work has provided an effective method for detection of small molecules with SERS.

Synthesis of Ni–Ru Alloy Nanoparticles and Their High Catalytic Activity in Dehydrogenation of Ammonia Borane

We report the synthesis and characterization of new Ni(x)Ru(1-x) (x = 0.56-0.74) alloy nanoparticles (NPs) and their catalytic activity for hydrogen release in the ammonia borane hydrolysis process. The alloy NPs were obtained by wet-chemistry method using a rapid lithium triethylborohydride reduction of Ni(2+) and Ru(3+) precursors in oleylamine. The nature of each alloy sample was fully characterized by TEM, XRD, energy dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). We found that the as-prepared Ni-Ru alloy NPs exhibited exceptional catalytic activity for the ammonia borane hydrolysis reaction for hydrogen release. All Ni-Ru alloy NPs, and in particular the Ni(0.74)Ru(0.26) sample, outperform the activity of similar size monometallic Ni and Ru NPs, and even of Ni@Ru core-shell NPs. The hydrolysis activation energy for the Ni(0.74)Ru(0.26) alloy catalyst was measured to be approximately 37 kJ mol(-1). This value is considerably lower than the values measured for monometallic Ni (≈70 kJ mol(-1)) and Ru NPs (≈49 kJ mol(-1)), and for Ni@Ru (≈44 kJ mol(-1)), and is also lower than the values of most noble-metal-containing bimetallic NPs reported in the literature. Thus, a remarkable improvement of catalytic activity of Ru in the dehydrogenation of ammonia borane was obtained by alloying Ru with a Ni, which is a relatively cheap metal.

Bifunctional catalytic/magnetic Ni@Ru core–shell nanoparticles

Core-shell structured Ni@Ru bimetallic nanoparticles are demonstrated as a bifunctional nanoplatform system for the hydrolysis reaction of ammonia-borane and also for magnetic separation.

Quantum-Dot-Based Solar Cells: Recent Advances, Strategies, and Challenges.

Among next-generation photovoltaic systems requiring low cost and high efficiency, quantum dot (QD)-based solar cells stand out as a very promising candidate because of the unique and versatile characteristics of QDs. The past decade has already seen rapid conceptual and technological advances on various aspects of QD solar cells, and diverse opportunities, which QDs can offer, predict that there is still ample room for further development and breakthroughs. In this Perspective, we first review the attractive advantages of QDs, such as size-tunable band gaps and multiple exciton generation (MEG), beneficial to solar cell applications. We then analyze major strategies, which have been extensively explored and have largely contributed to the most recent and significant achievements in QD solar cells. Finally, their high potential and challenges are discussed. In particular, QD solar cells are considered to hold immense potential to overcome the theoretical efficiency limit of 31% for single-junction cells.

Remarkably enhanced photocatalytic activity of laser ablated Au nanoparticle decorated BiFeO3 nanowires under visible-light

Hybrid photocatalysts consisting of single crystalline BiFeO3 nanowires and laser ablated Au nanoparticles were synthesized by a functionalization-step-free solution process. The 1.0 wt% Au nanoparticle decorated BiFeO3 nanowires exhibit ~30 times higher photocatalytic activity for water oxidation than that exhibited by the parent wires during the first 4 h.

Shape-dependent surface-enhanced Raman scattering in gold-Raman- probe-silica sandwiched nanoparticles for biocompatible applications

To meet the requirement of Raman probes (labels) for biocompatible applications, a synthetic approach has been developed to sandwich the Raman-probe (malachite green isothiocyanate, MGITC) molecules between the gold core and the silica shell in gold-SiO₂ composite nanoparticles. The gold-MGITC-SiO₂ sandwiched structure not only prevents the Raman probe from leaking out but also improves the solubility of the nanoparticles in organic solvents and in aqueous solutions even with high ionic strength. To amplify the Raman signal, three types of core, gold nanospheres, nanorods and nanostars, have been chosen as the substrates of the Raman probe. The effect of the core shape on the surface-enhanced Raman scattering (SERS) has been investigated. The colloidal nanostars showed the highest SERS enhancement factor while the nanospheres possessed the lowest SERS activity under excitation with 532 and 785 nm lasers. Three-dimensional finite-difference time domain (FDTD) simulation showed significant differences in the local electromagnetic field distributions surrounding the nanospheres, nanorods, and nanostars, which were induced by the localized surface plasmon resonance (LSPR). The electromagnetic field was enhanced remarkably around the two ends of the nanorods and around the sharp tips of the nanostars. This local electromagnetic enhancement made the dominant contribution to the SERS enhancement. Both the experiments and the simulation revealed the order nanostars > nanorods > nanospheres in terms of the enhancement factor. Finally, the biological application of the nanostar-MGITC-SiO₂ nanoparticles has been demonstrated in the monitoring of DNA hybridization. In short, the gold–MGITC-SiO₂ sandwiched nanoparticles can be used as a Raman probe that features high sensitivity, good water solubility and stability, low-background fluorescence, and the absence of photobleaching for future biological applications.

Hybrid Nanostructures for High‐Sensitivity Luminescence Nanothermometry in the Second Biological Window

Hybrid nanostructures containing neodymium-doped nanoparticles and infrared-emitting quantum dots constitute highly sensitive luminescent thermometers operating in the second biological window. They demonstrate that accurate subtissue fluorescence thermal sensing is possible.

Towards controlled synthesis and better understanding of highly luminescent PbS/CdS core/shell quantum dots

A two-step cation exchange procedure has been developed for synthesizing PbS/CdS core/shell quantum dots (QDs) with a much thicker shell than previously reported, which expands the flexibility of the current cation exchange approach. The thick-shell QDs allow relatively easy observation of the core/shell morphology by transmission electron microscopy as well as exhibiting characteristic absorption and emission of CdS when the shell thickness reaches 1.8 nm. X-ray diffraction patterns show gradual transformation from a rock salt PbS pattern to a zinc blend CdS pattern with increasing shell thickness and the overall diffraction pattern is indeed the same as that of the CdS standard when the shell is thicker than 3.6 nm. The thick-shell QDs were further analyzed by energy dispersive X-ray spectrometry. It is found that Pb only exists in the core region and is essentially absent in the shell region. All of these results consistently suggest that the shell is made of CdS, instead of ternary PbxCd1−xS alloy in thick-shell QDs. As direct experimental identification of the shell composition in thin-shell QDs is difficult, experimental data and calculations are combined to indirectly probe this issue. The comparison of band gap versus core size plots of different compositional models indicates that it is highly likely that the thin shell is also made of CdS. Importantly, these core/shell PbS/CdS QDs not only show significantly increased quantum yield up to 67% at the optimal shell thickness of about 0.7 nm, they are also much more photostable and thermally stable than the shell-free PbS QDs.

Facile and Mild Strategy to Construct Mesoporous CeO2–CuO Nanorods with Enhanced Catalytic Activity toward CO Oxidation

CeO2-CuO nanorods with mesoporous structure were synthesized by a facile and mild strategy, which involves an interfacial reaction between Ce2(SO4)3 precursor and NaOH ethanol solution at room temperature to obtain mesoporous CeO2 nanorods, followed by a solvothermal treatment of as-prepared CeO2 and Cu(CH3COO)2. Upon solvothermal treatment, CuO species is highly dispersed onto the CeO2 nanorod surface to form CeO2-CuO composites, which still maintain the mesoporous feature. A preliminary CO catalytic oxidation study demonstrated that the CeO2-CuO samples exhibited strikingly high catalytic activity, and a high CO conversion rate was observed without obvious loss in activity even after thermal treatment at a high temperature of 500 °C. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and hydrogen temperature-programmed reduction (H2-TPR) analysis revealed that there is a strong interaction between CeO2 and CuO. Moreover, it was found that the introduction of CuO species into CeO2 generates oxygen vacancies, which is highly likely to be responsible for high catalytic activity toward CO oxidation of the mesoporous CeO2-CuO nanorods.

Single crystalline La0.5Sr0.5MnO3 microcubes as cathode of solid oxide fuel cell

The efficiency of solid oxide fuel cells (SOFCs) is heavily dependent on the electrocatalytic activity of the cathode toward the oxygen reduction reaction (ORR). In order to achieve better cathode performance, single crystalline La0.5Sr0.5MnO3 (LSM) microcubes with the {200} facets have been synthesized by the hydrothermal method. It is found that the LSM microcubes exhibit lower polarization resistance than the conventional polycrystalline La0.8Sr0.2MnO3 powder in air from 700 °C to 900 °C. The ORR activation energy of the LSM microcubes is lower than that of the conventional powder. The ORR kinetics for the microcubes is limited by the charge transfer step while that for the conventional powder is dominated by the oxygen adsorption and dissociation on the cathode surface.