Dora Demeter

Small D-π-A systems with o-phenylene-bridged accepting units as active materials for organic photovoltaics.

Donor-acceptor (D-π-A) systems that combine triarylamine donor blocks and dicyanovinyl (DCV) acceptor groups have been synthesized. Starting from the triphenylamine (TPA)-thiophene-DCV compound (1) as a reference system, various synthetic approaches have been developed for controlling the light-harvesting properties and energy levels of the frontier orbitals in this molecule. Thus, the introduction of methoxy groups onto TPA, the replacement of one phenyl ring of TPA by a thiophene ring, or the extension of the π-conjugating spacer group lead to the modulation of the HOMO level. On the other hand, the fusion of the DCV group onto the vicinal thiophene ring by an ortho-phenylene bridge allows for a specific fine-tuning of the LUMO level. The electronic properties of the molecules were analyzed by using UV/Vis spectroscopy and cyclic voltammetry and the compounds were evaluated as donor materials in basic bilayer planar heterojunction solar cells by using C60 as acceptor material. The relationships between the electronic properties of the donors and the performance of the corresponding photovoltaic devices are discussed. Bilayer planar heterojunction solar cells that used reference compound 1 and C70 afforded power-conversion efficiencies of up to 3.7 %.

Structure-properties relationships in triarylamine-based donor-acceptor molecules containing naphtyl groups as donor material for organic solar cells

The effects of replacing the phenyl rings of triphenylamine (TPA) by naphtyl groups are analysed on a series of push-pull molecules containing a 2-thienyl-dicyanovinyl acceptor group. UV-Vis absorption spectroscopy and cyclic voltammetry show that the introduction of one or two naphtyl groups in the structure has limited effects on the optical properties and energy levels of the molecule. On the other hand, the evaluation of the compounds as donor material in bi-layer solar cells with C60 as acceptor shows that the number and mode of linkage of the naphtyl groups exert a marked influence on the power conversion efficiency (PCE) of the cell. Two naphtyl groups lead to a decrease of PCE with respect to TPA, while a single naphtyl group produces opposite effects depending on the linking mode. Compared to TPA, an alpha-naphtyl group leads to a small decrease of PCE while in contrast a beta-naphtyl leads to a ~35% increase of PCE due to improved short-circuit current density (Jsc) and fill-factor. The determination of the hole-mobility of these two donors by the space-charge-limited current method shows that these effects are correlated with the higher hole-mobility of the β-naphtyl compound.

Miniaturization of molecular conjugated systems for organic solar cells: towards pigmy donors

Organic solar cells with short-circuit current densities and conversion efficiencies of ca. 7.0 mA cm−2 and 2.0%, respectively, have been fabricated with a very small molecular donor based on substituted triarylamines.

Linearly π-conjugated oligothiophenes as simple metal-free sensitizers for dye-sensitized solar cells

Four linear oligothiophenes containing 4, 5 and 7 thiophene rings substituted by a variable number of octyl chains attached at the beta-position of some of the thiophene rings and possessing a terminal cyanoacrylic acid anchoring group have been synthesized. Results of UV-Vis absorption spectroscopy and cyclic voltammetry show that as expected the extension of the π-conjugated system leads to a decrease of the optical gap with an increase of the HOMO level. The four compounds have been evaluated as sensitizers in dye-sensitized solar cells (DSSCs) using a iodide/triiodide liquid electrolyte and the results are discussed in terms of the structure–property relationship with regard to the extension of the conjugated system and the number and position of the octyl side chains using N719 as the reference system. A power conversion efficiency of ∼7.30% corresponding to 90% of the value given by N719 under identical conditions has been obtained with one of the heptamers.

Small Molecular Donors for Organic Solar Cells Obtained by Simple and Clean Synthesis

A small donor-acceptor molecule is synthesized in a two-step procedure involving reaction of N,N-diphenylhydrazine on 2,5-diformylthiophene and Knoevenagel condensation. Results of UV/Vis absorption spectroscopy and cyclic voltammetry show that replacement of the phenyl ring bridge of a reference compound 2 by an azo group produces a slight red-shift of λmax, an enhancement of the molecular absorption coefficient, and a decrease of the energy level of the frontier orbitals. A preliminary evaluation of the potentialities of compound 1 as donor material in a basic bilayer planar heterojunction cell of 28 mm(2) active area using C60 as acceptor gave a short-circuit current density of 6.32 mA cm(-2) and a power conversion efficiency of 2.07 %.

Simple and Versatile Molecular Donors for Organic Photovoltaics Prepared by Metal-Free Synthesis

Donor-acceptor molecules (D-π-A) built by connecting a diphenylhydrazone block to a dicyanovinyl acceptor group via various thiophene-based π-conjugating spacers (1-5) were synthesized from mono- or dialdehydes by a simple metal-free procedure. Cyclic voltammetry and UV/Vis absorption spectroscopy show that the extension and/or increase of the donor strength of the spacer produces a decrease of the HOMO and LUMO energy level, a red shift of the absorption spectrum and an increase of the molecular absorption coefficient. Compared to solutions, the optical spectra of spin-cast thin films of compounds 1-3 show a broadening and red shift of the absorption bands, consistent with the formation of J-aggregates. In contrast the blue shift observed for the EDOT-containing compounds 4 and 5 suggests the presence of H-aggregates. Solution-cast and vacuum-deposited films of donors 1-5 were evaluated in solar cells with fullerene C60 as acceptor. A power-conversion efficiency among the highest reported for bilayer devices of basic configuration was obtained with compound 2. On the other hand, the results obtained with 4 and 5 suggest that the presence of EDOT in the structure can have deleterious effects on the organization and performances of the donor material.

3,4-Ethylenedioxythiophene (EDOT) as building block for the design of small molecular donors for organic solar cells

Small donor–acceptor molecules with EDOT as donor unit have been synthesized and evaluated as active material in organic solar cells.

A Redox‐Active Binder for Electrochemical Capacitor Electrodes

A promising strategy for increasing the performance of supercapacitors is proposed. Until now, a popular strategy for increasing the specific capacity of the electrode consists of grafting redox molecules onto a high surface area carbon structure to add a faradaic contribution to the charge storage. Unfortunately, the grafting of molecules to the carbon surface leads to a dramatic decrease of the electrochemical performances of the composite material. Herein, we used the organic binder as an active material in the charge/discharge process. Redox molecules were attached onto its polymeric skeleton to obtain a redox binder with the dual functionalities of both the binder and the active material. In this way, the electrochemical performance was improved without detrimentally affecting the properties of the porous carbon. Results showed that the use of a redox binder is promising for enhancing both energy and power densities.