Drauzio E.N. Rangel

Is there a common water-activity limit for the three domains of life?

Archaea and Bacteria constitute a majority of life systems on Earth but have long been considered inferior to Eukarya in terms of solute tolerance. Whereas the most halophilic prokaryotes are known for an ability to multiply at saturated NaCl (water activity (aw) 0.755) some xerophilic fungi can germinate, usually at high-sugar concentrations, at values as low as 0.650–0.605 aw. Here, we present evidence that halophilic prokayotes can grow down to water activities of <0.755 for Halanaerobium lacusrosei (0.748), Halobacterium strain 004.1 (0.728), Halobacterium sp. NRC-1 and Halococcus morrhuae (0.717), Haloquadratum walsbyi (0.709), Halococcus salifodinae (0.693), Halobacterium noricense (0.687), Natrinema pallidum (0.681) and haloarchaeal strains GN-2 and GN-5 (0.635 aw). Furthermore, extrapolation of growth curves (prone to giving conservative estimates) indicated theoretical minima down to 0.611 aw for extreme, obligately halophilic Archaea and Bacteria. These were compared with minima for the most solute-tolerant Bacteria in high-sugar (or other non-saline) media (Mycobacterium spp., Tetragenococcus halophilus, Saccharibacter floricola, Staphylococcus aureus and so on) and eukaryotic microbes in saline (Wallemia spp., Basipetospora halophila, Dunaliella spp. and so on) and high-sugar substrates (for example, Xeromyces bisporus, Zygosaccharomyces rouxii, Aspergillus and Eurotium spp.). We also manipulated the balance of chaotropic and kosmotropic stressors for the extreme, xerophilic fungi Aspergillus penicilloides and X. bisporus and, via this approach, their established water-activity limits for mycelial growth (∼0.65) were reduced to 0.640. Furthermore, extrapolations indicated theoretical limits of 0.632 and 0.636 aw for A. penicilloides and X. bisporus, respectively. Collectively, these findings suggest that there is a common water-activity limit that is determined by physicochemical constraints for the three domains of life.

Biological control of insects in Brazil and China: history, current programs and reasons for their successes using entomopathogenic fungi

Abstract Brazil and China have been successful in the use of microbial control methods to manage several agricultural and forest insects. In both countries, entomopathogenic fungi (EF) have been used for pest management since the 1970s. However, EF production and commercialization have not been constant in either country. Several companies and cooperatives suspended their activities or shut down from the 1970s to the 1990s. This was due to loss of confidence in available mycoinsecticides by Brazilian farmers or due to reduced involvement and government subsidies for biological control in China; and, consequently, mycoinsecticides were largely replaced by inexpensive chemical insecticides. Starting in the 1990s and continuing until today, however, new Brazilian and Chinese private companies have arisen. In Brazil, the area treated with M. anisopliae for spittlebug control alone is estimated to be approximately one million hectares in 2008, 75% of which was for control of spittlebugs in sugarcane plantations and the remainder for spittlebugs in pasture grass (primarily Brachiaria spp.) and other smaller programs. In China, the fungus Beauveria bassiana was used annually in 0.8–1.3 million ha until the 1980s. Several factors were important for the success of these programs, such as: governmental support (at least during the initial steps of biocontrol programs); availability of indigenous virulent fungal isolates; low-cost substrates for mass production; retail prices of mycoinsecticides lower than their chemical counterparts; and sale by contract which allows the products to be immediately available for use, rather than stored. In this report, we discuss the current biocontrol programs using insect fungi in these two developing countries, as well as the future and main challenges they must face to further encourage the adoption of mycoinsecticides.

Effects of physical and nutritional stress conditions during mycelial growth on conidial germination speed, adhesion to host cuticle, and virulence of Metarhizium anisopliae, an entomopathogenic fungus.

Growth under stress may influence pathogen virulence and other phenotypic traits. Conidia of the entomopathogenic fungus Metarhizium anisopliae var. anisopliae (isolate ARSEF 2575) were produced under different stress conditions and then examined for influences on in vitro conidial germination speed, adhesion to the insect cuticle, and virulence to an insect host, Tenebrio molitor. Conidia were produced under non-stress conditions [on potato-dextrose agar plus 1gl(-1) yeast extract (PDAY; control)], or under the following stress conditions: osmotic (PDAY+sodium chloride or potassium chloride, 0.6 or 0.8m); oxidative [(PDAY+hydrogen peroxide, 5mm) or UV-A (irradiation of mycelium on PDAY)]; heat shock (heat treatment of mycelium on PDAY at 45 degrees C, 40min); and nutritive [minimal medium (MM) with no carbon source, or on MM plus 3gl(-1) lactose (MML)]. Conidia were most virulent (based on mortality at 3d) and had the fastest germination rates when produced on MML, followed by MM. In addition, conidial adhesion to host cuticle was greatest when the conidia were produced on MML. Media with high osmolarity (0.8m) produced conidia with slightly elevated virulence and faster germination rates than conidia produced on the control medium (PDAY), but this trend did not hold for media with the lower osmolarity, (0.6m). Conidia produced from mycelium irradiated with UV-A while growing on PDAY had somewhat elevated virulence levels similar to that of conidia produced on MM, but their germination rate was not increased. Hydrogen peroxide and heat shock treatments did not alter virulence. These results demonstrate that the germination, adhesion and virulence of M. anisopliae conidia can be strongly influenced by culture conditions (including stresses) during production of the conidia.

Damage and recovery from UV-B exposure in conidia of the entomopathogens Verticillium lecanii and Aphanocladium album

We evaluated the effects of exposure to doses supplied at an environmentally realistic intensity of UV-B radiation (800 mW m−2 weighted irradiance) on the culturability and germination of selected strains of the entomopathogenic Hyphomycetes Verticillium lecanii and Aphanocladium album. Increased UV-B exposure decreased relative percent culturability for all strains. Four hours of exposure to UV-B were sufficient to reduce the culturability close to zero. The LT50 (50% lethal time) ranged from 120 ± 5 min for the V. lecanii strain ARSEF 6430 to 86 ± 14 min for the A. album strain ARSEF 6433. A strong delay in the germination of surviving conidia was observed. To determine the occurrence of photoreactivation in these two genera, we evaluated the effect of exposure to visible light after exposure to UV-B radiation. There was no significant difference in relative culturability between conidia exposed to visible light after UV-B exposure compared to those incubated in the dark after UV-B exposure. This indicates that photoreactivation, if it occurs, must have limited importance in the repair of the damage induced by UV-B radiation in these two genera.

Stress tolerance and virulence of insect-pathogenic fungi are determined by environmental conditions during conidial formation

Abstract The virulence to insects and tolerance to heat and UV-B radiation of conidia of entomopathogenic fungi are greatly influenced by physical, chemical, and nutritional conditions during mycelial growth. This is evidenced, for example, by the stress phenotypes of Metarhizium robertsii produced on various substrates. Conidia from minimal medium (Czapek’s medium without sucrose), complex medium, and insect (Lepidoptera and Coleoptera) cadavers had high, moderate, and poor tolerance to UV-B radiation, respectively. Furthermore, conidia from minimal medium germinated faster and had increased heat tolerance and were more virulent to insects than those from complex medium. Low water-activity or alkaline culture conditions also resulted in production of conidia with high tolerance to heat or UV-B radiation. Conidia produced on complex media exhibited lower stress tolerance, whereas those from complex media supplemented with NaCl or KCl (to reduce water activity) were more tolerant to heat and UV-B than those from the unmodified complex medium. Osmotic and nutritive stresses resulted in production of conidia with a robust stress phenotype, but also were associated with low conidial yield. Physical conditions such as growth under illumination, hypoxic conditions, and heat shock before conidial production also induced both higher UV-B and heat tolerance; but conidial production was not decreased. In conclusion, physical and chemical parameters, as well as nutrition source, can induce great variability in conidial tolerance to stress for entomopathogenic fungi. Implications are discussed in relation to the ecology of entomopathogenic fungi in the field, and to their use for biological control. This review will cover recent technologies on improving stress tolerance of entomopathogenic fungi for biological control of insects.

Stress induced cross-protection against environmental challenges on prokaryotic and eukaryotic microbes

Prokaryotic and eukaryotic microbes thrive successfully in stressful environments such as high osmolarity, acidic or alkali, solar heat and u.v. radiation, nutrient starvation, oxidative stress, and several others. To live under these continuous stress conditions, these microbes must have mechanisms to protect their proteins, membranes, and nucleic acids, as well as other mechanisms that repair nucleic acids. The stress responses in bacteria are controlled by master regulators, which include alternative sigma factors, such as RpoS and RpoH. The sigma factor RpoS integrates multiple signals, such as the general stress response regulators and the sigma factor RpoH regulates the heat shock proteins. These response pathways extensively overlap and are induced to various extents by the same environmental stresses. In eukaryotes, two major pathways regulate the stress responses: stress proteins, termed heat shock proteins (HSP), which appear to be required only for growth during moderate stress, and stress response elements (STRE), which are induced by different stress conditions and these elements result in the acquisition of a tolerant state towards any stress condition. In this review, the mechanisms of stress resistance between prokaryotic and eukaryotic microbes will be described and compared.

Conidial pigmentation is important to tolerance against solar-simulated radiation in the entomopathogenic fungus Metarhizium anisopliae

Abstract The importance of conidial pigmentation to solar UV radiation tolerance in the entomopathogenic fungus Metarhizium anisopliae var. anisopliae, was estimated by comparing the effects of exposure to simulated solar UV radiation on the wild-type parent strain U.S. Department of Agriculture (USDA)–Agricultural Research Service (ARS) Collection of Entomopathogenic Fungal Cultures (ARSEF) 23, which has dark green conidia, and three groups of color mutants with yellow, purple and white conidia. The comparisons included inactivation levels and the kinetics of germination of conidia exposed or not exposed to simulated solar UV radiation. In addition to significantly inactivating the conidia of different mutants, exposure to radiation delayed for several hours the germination of surviving conidia of the wild type and all mutants. In general, mutants with white conidia were more sensitive to simulated solar UV radiation than mutants with purple conidia, which were more sensitive than mutants with yellow conidia, which in turn were more sensitive than the green wild strain. A significant variation in tolerance to simulated solar radiation was observed among mutants within each color group, particularly among mutants with yellow conidia. Revertants with green conidia, DWR 179 and DWR 176, were obtained from the very sensitive UV mutants DWR 148 (yellow conidia) and DWR 149 (purple conidia), respectively. These revertants had levels of tolerance to simulated solar UV radiation similar to those of the wild-type ARSEF 23. This observation is strong evidence of the importance of green conidial pigmentation for tolerance to simulated solar UV radiation, a factor that could be manipulated to produce M. anisopliae strains with more tolerance to solar UV radiation.

An intensive search for promising fungal biological control agents of ticks, particularly Rhipicephalus microplus.

Entomopathogenic fungi have been investigated worldwide as promising biological control agents of the cattle tick Rhipicephalus microplus. The current study evaluates the virulence of several fungal isolates to R. microplus larva in the laboratory as part of an effort to identify isolates with promise for effective biocontrol of R. microplus in the field. Sixty fungal isolates, encompassing 5 Beauveria spp. and 1 Engyodontium albus (=Beauveria alba), were included in this study. In addition to bioassays, the isolates were characterized morphologically and investigated as to their potential for conidial mass production. These findings were correlated with previous reports on the same fungal isolates of their natural UV-B tolerance (Fernandes et al., 2007), thermotolerance and cold activity (Fernandes et al., 2008), and genotypes (Fernandes et al., 2009). R. microplus larvae obtained from artificially infested calves were less susceptible to Beauveria bassiana infection than ticks acquired from naturally infested cattle from a different location. Isolates CG 464, CG 500 and CG 206 were among the most virulent Beauveria isolates tested in this study. All fungal isolates presented morphological features consistent with their species descriptions. Of the 53 B. bassiana isolates, five (CG 481, CG 484, CG 206, CG 235 and CG 487) had characteristics that qualified them as promising candidates for biological control agents of R. microplus, viz., mean LC(50) between 10(7) and 10(8)conidiaml(-1); produced 5000 conidia or more on 60mm(2) surface area of PDAY medium; and, in comparison to untreated (control) conidia, had the best conidial tolerances to UV-B (7.04 kJ m(-2)) and heat (45°C, 2h) of 50% or higher, and conidial cold (5°C, 15d) activity (mycelial growth) higher than 60%. The current study of 60 Beauveria spp. isolates, therefore, singles out a few (five) with high potential for controlling ticks under field conditions.

Characterization of Metarhizium species and varieties based on molecular analysis, heat tolerance and cold activity

Aims:  The genetic relationships and conidial tolerances to high and low temperatures were determined for isolates of several Metarhizium species and varieties.

Molecular and physiological effects of environmental UV radiation on fungal conidia

Conidia are specialized structures produced at the end of the asexual life cycle of most filamentous fungi. They are responsible for fungal dispersal and environmental persistence. In pathogenic species, they are also involved in host recognition and infection. Conidial production, survival, dispersal, germination, pathogenicity and virulence can be strongly influenced by exposure to solar radiation, although its effects are diverse and often species dependent. UV radiation is the most harmful and mutagenic waveband of the solar spectrum. Direct exposure to solar radiation for a few hours can kill conidia of most fungal species. Conidia are killed both by solar UV-A and UV-B radiation. In addition to killing conidia, which limits the size of the fungal population and its dispersion, exposures to sublethal doses of UV radiation can reduce conidial germination speed and virulence. The focus of this review is to provide an overview of the effects of solar radiation on conidia and on the major systems involved in protection from and repair of damage induced by solar UV radiation. The efforts that have been made to obtain strains of fungi of interest such as entomopathogens more tolerant to solar radiation will also be reviewed.