Drw Dirk Martens

Brick-mortar interface effects in masonry under compression

Masonry component products are increasingly made industrially with reduced variation in mechanical properties. The joint is the only part of the masonry that is affected by manual action and so the load bearing capacity is not only determined by the quality of the bricks and mortar used but moreover by the way the masonry has been built and cured. As a result, it may be expected that the largest material variations are at the brick–mortar interfaces. This has been observed as irregular interface bonding with a bonded central area surrounded by fissures. As a consequence of the final shape of the joint, forces concentrate in the central part of the joint and strain variations occur near fissure tips which result in spalling of bricks in experiments. This paper demonstrates the need for detailed deformational measurements in the brick–mortar interface region. To overcome the limitations with traditional measuring instruments, a refined methodology based on the laser speckle technique is introduced in a comp...

Electronic speckle pattern interferometry observation of brick–mortar interface behaviour under compression

The brick–mortar interaction is important in the mechanical behaviour of masonry. It affects the load transfer considerably, as shown by detailed deformation measurements taken using electronic speckle pattern interferometry (ESPI), a laser speckle interference technique. A companion paper [Canadian Journal of Civil Engineering, 34(11), 1475 (2007)] by the authors of this paper argues that the joint is the only part of contemporary masonry significantly affected by manual action, which is why large material variations appear at the brick–mortar interface. To evaluate this phenomenon, ESPI measurements were performed and compared with accompanying linear variable differential transformer (LVDT) results. The behaviour of specimens loaded with various eccentricities was relatively soft in the brick–mortar interface area when compared with the behaviour shown in the surrounding stiff brick and mortar. The brick–mortar interface was characterized by a central part surrounded by fissures. Most of the load was t...