Dulce C. Arango

Multiplexed microneedle-based biosensor array for characterization of metabolic acidosis.

The development of a microneedle-based biosensor array for multiplexed in situ detection of exercise-induced metabolic acidosis, tumor microenvironment, and other variations in tissue chemistry is described. Simultaneous and selective amperometric detection of pH, glucose, and lactate over a range of physiologically relevant concentrations in complex media is demonstrated. Furthermore, materials modified with a cell-resistant (Lipidure(®)) coating were shown to inhibit macrophage adhesion; no signs of coating delamination were noted over a 48-h period.

A Multifunctional Thin Film Au Electrode Surface Formed by Consecutive Electrochemical Reduction of Aryl Diazonium Salts

A multifunctional thin film surface capable of immobilizing two diverse molecules on a single gold electrode was prepared by consecutive electrodeposition of nitrophenyl and phenylboronic acid pinacol ester (PBA-PE) diazonium salts. Activation of the stacked film toward binding platinum nanoparticles (PtNPs) and yeast cells occurred via chemical deprotection of the pinacol ester followed by electroreduction of nitro to amino groups. FTIR spectral analysis was used to study and verify film composition at each stage of preparation. The affect of electrodeposition protocol over the thickness of the nitrophenyl and PBA-PE layers was explored and had a profound impact on the film properties. Thicker nitrophenyl films led to diminished PBA-PE diazonium reduction currents during assembly and decreased phenylboronic acid (PBA) layer thickness while allowing for higher PtNP loading and catalytic currents from PtNP-mediated peroxide reduction. Multilayer PBA films could be formed over the nitrophenyl film; however, only submonlayer PBA films permitted access to the underlying layer. The sequence of functional group activation toward binding was also shown to be significant, as perchlorate used to remove pinacol ester also converted aminophenyl groups accessible to the solution to nitrophenyl groups, preventing electrostatic PtNP binding. Finally, SEM images show PtNPs immobilized in close proximity (nanometers) to captured yeast cells on the PBA-aminophenyl-Au film. Such multibinding functionality films that maintain conductivity for subsequent electrochemical measurements hold promise for the development of electrochemical and/or optical platforms for fundamental cell studies, genomic and proteomic analysis, and biosensing.

Rational Redesign of Glucose Oxidase for Improved Catalytic Function and Stability

Glucose oxidase (GOx) is an enzymatic workhorse used in the food and wine industries to combat microbial contamination, to produce wines with lowered alcohol content, as the recognition element in amperometric glucose sensors, and as an anodic catalyst in biofuel cells. It is naturally produced by several species of fungi, and genetic variants are known to differ considerably in both stability and activity. Two of the more widely studied glucose oxidases come from the species Aspergillus niger (A. niger) and Penicillium amagasakiense (P. amag.), which have both had their respective genes isolated and sequenced. GOx from A. niger is known to be more stable than GOx from P. amag., while GOx from P. amag. has a six-fold superior substrate affinity (K M) and nearly four-fold greater catalytic rate (k cat). Here we sought to combine genetic elements from these two varieties to produce an enzyme displaying both superior catalytic capacity and stability. A comparison of the genes from the two organisms revealed 17 residues that differ between their active sites and cofactor binding regions. Fifteen of these residues in a parental A. niger GOx were altered to either mirror the corresponding residues in P. amag. GOx, or mutated into all possible amino acids via saturation mutagenesis. Ultimately, four mutants were identified with significantly improved catalytic activity. A single point mutation from threonine to serine at amino acid 132 (mutant T132S, numbering includes leader peptide) led to a three-fold improvement in k cat at the expense of a 3% loss of substrate affinity (increase in apparent K M for glucose) resulting in a specify constant (k cat/K M) of 23.8 (mM−1 · s−1) compared to 8.39 for the parental (A. niger) GOx and 170 for the P. amag. GOx. Three other mutant enzymes were also identified that had improvements in overall catalysis: V42Y, and the double mutants T132S/T56V and T132S/V42Y, with specificity constants of 31.5, 32.2, and 31.8 mM−1 · s−1, respectively. The thermal stability of these mutants was also measured and showed moderate improvement over the parental strain.

Antimicrobial peptide interactions with silica bead supported bilayers and E. coli: buforin II, magainin II, and arenicin†

Using the unique quantitative capabilities of hyperspectral confocal microscopy combined with multivariate curve resolution, a comparative approach was employed to gain a deeper understanding of the different types of interactions of antimicrobial peptides (AMPs) with biological membranes and cellular compartments. This approach allowed direct comparison of the dynamics and local effects of buforin II, magainin II, and arenicin with nanoporous silica bead supported bilayers and living E. coli. Correlating between experiments and comparing these responses have yielded several important discoveries for pursuing the underlying biophysics of bacteriocidal specificity and the connection between structure and function in various cellular environments. First, a novel fluorescence method for direct comparison of a model and living system is demonstrated by utilizing the membrane partitioning and environmental sensitivity of propidium iodide. Second, measurements are presented comparing the temporal dynamics and local equilibrium concentrations of the different antimicrobial agents in the membrane and internal matrix of the described systems. Finally, we discuss how the data lead to a deeper understanding of the roles of membrane penetration and permeabilization in the action of these AMPs. Copyright

Advanced optical measurements for characterizing photophysical properties of single nanoparticles.

Formation of complex nanomaterials would ideally involve single-pot reaction conditions with one reactive site per nanoparticle, resulting in a high yield of incrementally modified or oriented structures. Many studies in nanoparticle functionalization have sought to generate highly uniform nanoparticles with tailorable surface chemistry necessary to produce such conjugates, with limited success. In order to overcome these limitations, we have modified commercially available nanoparticles with multiple potential reaction sites for conjugation with single ssDNAs, proteins, and small unilamellar vesicles. These approaches combined heterobifunctional and biochemical template chemistries with single molecule optical methods for improved control of nanomaterial functionalization. Several interesting analytical results have been achieved by leveraging techniques unique to SNL, and provide multiple paths for future improvements for multiplex nanoparticle synthesis and characterization. Hyperspectral imaging has proven especially useful for assaying substrate immobilized fluorescent particles. In dynamic environments, temporal correlation spectroscopies have been employed for tracking changes in diffusion/hydrodynamic radii, particle size distributions, and identifying mobile versus immobile sample fractions at unbounded dilution. Finally, Raman fingerprinting of biological conjugates has been enabled by resonant signal enhancement provided by intimate interactions with nanoparticles and composite nanoshells.

Viral Vectors for Gene Modification of Plants as Chem/Bio Sensors

Chemical or biological sensors that are specific, sensitive, and robust allowing intelligence gathering for verification of nuclear non-proliferation treaty compliance and detouring production of weapons of mass destruction are sorely needed. Although much progress has been made in the area of biosensors, improvements in sensor lifetime, robustness, and device packaging are required before these devices become widely used. Current chemical and biological detection and identification techniques require less-than-covert sample collection followed by transport to a laboratory for analysis. In addition to being expensive and time consuming, results can often be inconclusive due to compromised sample integrity during collection and transport. We report here a demonstration of a plant based sensor technology which utilizes mature and seedling plants as chemical sensors. One can envision genetically modifying native plants at a site of interest that can report the presence of specific toxins or chemicals. In this one year project we used a developed inducible expression system to show the feasibility of plant sensors. The vector was designed as a safe, non-infectious vector which could be used to invade, replicate, and introduce foreign genes into mature host plants that then allow the plant to sense chem/bio agents. The genes introduced through the vector included a reporter gene that encodes for green fluorescent protein (GFP) and a gene that encodes for a mammalian receptor that recognizes a chemical agent. Specifically, GFP was induced by the presence of 17-{beta}-Estradiol (estrogen). Detection of fluorescence indicated the presence of the target chemical agent. Since the sensor is a plant, costly device packaging development or manufacturing of the sensor were not required. Additionally, the biological recognition and reporting elements are maintained in a living, natural environment and therefore do not suffer from lifetime disadvantages typical of most biosensing platforms. Detection of the chem/bio agent reporter (GFP) can be detected only at a specific wavelength.