Dušan K. Božanić

Adsorption of sulfur onto a surface of silver nanoparticles stabilized with sago starch biopolymer.

Adsorption of sulfide ions onto a surface of starch capped silver nanoparticles upon addition of thioacetamide was investigated. UV-vis absorption spectroscopy revealed that the adsorption of the sulfide ion on the surface of the silver nanoparticles induced damping as well as blue shift of the silver surface plasmon resonance band. Further increase in thioacetamide concentration led to shift of the resonance band toward higher wavelengths indicating the formation of the continuous Ag2S layer on the silver surface. Thus fabricated nanoparticles were investigated using electron microscopy techniques (TEM, HRTEM, and HAADF-STEM) and X-ray photoelectron spectroscopy (XPS), which confirmed their core-shell structure.

Viscoelastic properties and antimicrobial activity of cellulose fiber sheets impregnated with Ag nanoparticles

A silver nanoparticle colloid was prepared by a modified Tollens method using d-glucose as the reduction agent. The obtained nanoparticles were used for the modification of pine, linter and recycled cellulose fibers. Although the silver contents were relatively low (0.05-0.13 wt.%), the cellulose-sheets prepared from the modified fibers show improved mechanical and viscoelastic properties. The tensile index (strength) increased with up to 30% in comparison to the index of the sheets obtained from the untreated fibers. The influence of the nanoparticles on the viscoelastic properties of the cellulose sheets was investigated by dynamic mechanical analysis (DMA) in the temperature range from -120 to 20 °C and with a force frequency of 100 Hz. A broad relaxation transition positioned at -80 °C was observed in the loss modulus spectrum of all the cellulose sheets, while the Ag-modified sheets exhibited higher storage moduli values in the whole temperature range. The antimicrobial activity tests show that the pine, silver and recycled cellulose fiber sheets with silver nanoparticles can be successfully employed to prevent the viability and growth of the common pathogens Staphylococcus aureus, Escherichia coli and Candida albicans.

Inhibition of Microbial Growth by Silver–Starch Nanocomposite Thin Films

A sago starch biopolymer with embedded silver nanoparticles has been studied as a material for the prevention of microbial growth. Approximately 8 nm in size, silver nanoparticles have been synthesized by reduction of the silver salt in aqueous solution in the presence of sago starch using sodium borohydride as a reducing agent. The obtained solutions were cast on glass plates to obtain thin supported silver–starch nanocomposite films. The morphology of the nanocomposites was investigated by scanning and transmission electron microscopy. UV-Vis absorption spectroscopy showed that during the film formation a part of the silver nanoparticles has been trapped in the water present in the sample, which enabled their partial oxidation into active Ag+ species. The oxidation of the silver nanoparticles was confirmed by X-ray photoelectron spectroscopy. The antimicrobial activity tests have shown that the nanocomposite material can be successfully employed to prevent the viability and growth of the common pathogens Staphylococcus aureus, Escherichia coli and Candida albicans.

Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles

Nanocomposites of electroactive ceramics and ferroelectric polymers exploit favorable features of the matrix polymer and the nanostructured filler to produce new functional materials for pressure and IR sensors. In this study, the influence of mechanical activation of barium titanate (BaTiO3) particles on the structural properties of BaTiO3/polyvinylidene fluoride (PVDF) nanocomposites was investigated. Nanocomposite films were prepared by the solution casting method and characterized by scanning electron microscopy, x-ray diffraction and Raman spectroscopy. It was found that mechanically activated fillers promote the formation of a ferroelectric ?-phase during crystallization of PVDF.

Tryptophan-functionalized gold nanoparticles for deep UV imaging of microbial cells

Biocompatible fluorescent nanostructures were prepared by a functionalization of gold nanoparticles with the amino acid tryptophan. The gold-tryptophan bioconjugates were investigated by TEM and HRTEM and various spectroscopy methods (XPS, FTIR, UV-vis and photoluminescence). It was found that the gold nanoparticles, initially 8 nm in diameter, aggregate in the presence of the amino acid. From the XPS and FTIR spectroscopy results, it was concluded that the tryptophan gold interactions mainly take place via indole and carboxyl groups. Although the indole group is involved in the interaction with the gold surfaces, the tryptophan-gold hybrids showed strong fluorescence due to the presence of multilayers of tryptophan. Deep ultra violet (DUV) imaging performed at the SOLEIL synchrotron showed that it is possible to detect these hybrid nanostructures within Escherichia coli cells.

Glycogen and gold nanoparticle bioconjugates: controlled plasmon resonance via glycogen-induced nanoparticle aggregation

Hybrid nanosystems composed of glycogen biopolymers and gold nanoparticles were prepared by an in situ non-toxic synthetic procedure. Transmission electron microscopy (TEM) and various spectroscopic methods (optical absorption, X-ray photoelectron and photoluminescence spectroscopy) were used for the characterization of the obtained bioconjugates. The gold nanoparticles formed in the presence of glycogen were spherical in shape and approximately 15 nm in diameter. The TEM micrographs show that the nanoparticles aggregated on the surface of the glycogen biomolecules. This effect induced a shift of the surface plasmon resonance band towards higher wavelengths on an increase in gold ion concentration. Effective medium theory calculations were carried out in order to explain the observed redshift of the plasmon band in the absorption spectra of the Au–glycogen colloids. The interactions of the gold nanoparticles with glycogen strongly affected the photoluminescence of the glycogenin protein incorporated into its structure. The Au–glycogen hydrocolloids exhibited good chemical stability in the presence of saline, phosphate buffered saline, alanine, histidine and D-glucose.

Identifying Cytosine-Specific Isomers via High-Accuracy Single Photon Ionization

Biological entities, such as DNA bases or proteins, possess numerous tautomers and isomers that lie close in energy, making the experimental characterization of a unique tautomer challenging. We apply VUV synchrotron-based experiments combined with state-of-the-art ab initio methodology to determine the adiabatic ionization energies (AIEs) of specific gas-phase cytosine tautomers produced in a molecular beam. The structures and energetics of neutral and cationic cytosine tautomers were determined using explicitly correlated methods. The experimental spectra correspond to well-resolved bands that are attributable to the specific contributions of five neutral tautomers of cytosine prior to ionization. Their AIEs are experimentally determined for the first time with an accuracy of 0.003 eV. This study also serves as an important showcase for other biological entities presenting a dense pattern of isomeric and tautomeric forms in their spectra that can be investigated to understand the charge redistribution in these species upon ionization.

Electronic Properties of Free-Standing Surfactant-Capped Lead Halide Perovskite Nanocrystals Isolated in Vacuo

We report an investigation of lead halide perovskite CH3NH3PbBr3 nanocrystals and associated ligand molecules by combining several different state-of-the-art experimental techniques, including synchrotron radiation-based XPS and VUV PES of free-standing nanocrystals isolated in vacuum. By using this novel approach for perovskite materials, we could directly obtain complete band alignment to vacuum of both CH3NH3PbBr3 nanocrystals and the ligands widely used in their preparation. We discuss the possible influence of the ligand molecules to apparent perovskite properties, and we compare the electronic properties of nanocrystals to those of bulk material. The experimental results were supported by DFT calculations.

Sodium-alginate biopolymer as a template for the synthesis of nontoxic red emitting Mn2+-doped CdS nanoparticles

Manganese-doped cadmium sulfide (CdS:Mn) nanoparticles were prepared by chemical synthesis using sodium-alginate as template. The preparation of the nanocomposites involved ionic crosslinking of the biopolymer by dimerization of its α-L-guluronic monomers with Cd2+ and subsequent formation of the semiconductor nanoparticles upon addition of sulfide ions in the presence of Mn2+. The crystalline phase of CdS in the material was confirmed by XRD. The surface morphology of the nanocomposites was investigated by SEM. The observation by TEM showed that the CdS:Mn particles were spherical in shape with diameters of approximately 4 nm. EPR measurements of the CdS:Mn-alginate nanocomposite showed that the Mn2+ ions were incorporated in cationic sites of CdS with lower symmetry. Due to a distorted crystal field induced by the Mn2+ ions, photoluminescence spectra of the CdS:Mn-alginate showed red fluorescence between 650 nm and 750 nm falling into the optical window for bioimaging in which the light has its maximum tissue penetration depth. It was demonstrated that the interaction between the nanoparticles and the matrix prevents release of CdS into the environment, leading to low acute toxicity of the nanocomposites.