Dustin R. Bunch

Conversion of abiraterone to D4A drives anti-tumour activity in prostate cancer

Prostate cancer resistance to castration occurs because tumours acquire the metabolic capability of converting precursor steroids to 5α-dihydrotestosterone (DHT), promoting signalling by the androgen receptor and the development of castration-resistant prostate cancer. Essential for resistance, DHT synthesis from adrenal precursor steroids or possibly from de novo synthesis from cholesterol commonly requires enzymatic reactions by 3β-hydroxysteroid dehydrogenase (3βHSD), steroid-5α-reductase (SRD5A) and 17β-hydroxysteroid dehydrogenase (17βHSD) isoenzymes. Abiraterone, a steroidal 17α-hydroxylase/17,20-lyase (CYP17A1) inhibitor, blocks this synthetic process and prolongs survival. We hypothesized that abiraterone is converted by an enzyme to the more active Δ4-abiraterone (D4A), which blocks multiple steroidogenic enzymes and antagonizes the androgen receptor, providing an additional explanation for abiraterone’s clinical activity. Here we show that abiraterone is converted to D4A in mice and patients with prostate cancer. D4A inhibits CYP17A1, 3βHSD and SRD5A, which are required for DHT synthesis. Furthermore, competitive androgen receptor antagonism by D4A is comparable to the potent antagonist enzalutamide. D4A also has more potent anti-tumour activity against xenograft tumours than abiraterone. Our findings suggest an additional explanation—conversion to a more active agent—for abiraterone’s survival extension. We propose that direct treatment with D4A would be more clinically effective than abiraterone treatment.

Development and validation of a liquid chromatography-tandem mass spectrometry assay for serum 25-hydroxyvitamin D2/D3 using a turbulent flow online extraction technology

Abstract Background: Vitamin D is important to health and disease. Liquid chromatography-tandem mass spectrometry (LC-MSMS) is considered the most accurate technology for quantification of serum 25-hydroxyvitamin D (25OHD) which is the best biomarker for estimating vitamin D nutritional status. Methods: Serum was mixed with acetonitrile containing hexadeuterated 25-hydroxyvitamin D3 (d6-25OHD3) and centrifuged 10 min at 15,634×g. The supernatant was injected onto a turbulent flow preparatory column then transferred to a polar endcapped C18 analytical column. The mass spectrometer was set for positive atmospheric pressure chemical ionization. Results: The analytical cycle time was 5.5 min. Inter- and intra-assay CV for both analytes across three concentrations ranged from 3.8% to 14.2%. The method was linear from 3.0 to 283.6 nmol/L for 25-hydroxyvitamin D3 (25OHD3) and 4.6 to 277.9 nmol/L for 25-hydroxyvitamin D2 (25OHD2), with an accuracy of 88.7%–118.7% and 90.7%–100.3%, respectively. No carryover or ion suppression was observed. Comparison with a radioimmunoassay using patient specimens (n=527) showed a mean difference of 5.2%, and diagnostic agreement of 80.9% with Deming regression of slope 0.867, intercept 12.8, standard error of estimate (SEE) 17.4, and r=0.8425. Conclusions: The LC-MSMS method coupled with turbulent flow technology for serum 25OHD quantitation is rapid, efficient, and suitable for clinical testing. Clin Chem Lab Med 2009;47:1565–72.

A novel HPLC method for quantification of 10 antiepileptic drugs or metabolites in serum/plasma using a monolithic column.

Therapeutic drug monitoring of antiepileptic drugs (AEDs) is important in maximizing the therapeutic response while minimizing the adverse effects. High-performance liquid chromatography (HPLC) is the most commonly used technique for this purpose. Recently, commercial monolithic columns were introduced, which consist of a single rod of fused silica or polymer. The objective of this work was to develop a simple and fast method to quantify 10 commonly measured AEDs or metabolites [carbamazepine, carbamazepine-10,11-epoxide, felbamate, lamotrigine, 10,11-dihydro-10-hydroxy-carbamazepine (active metabolite of oxcarbazepine), pentobarbital, phenobarbital, phenytoin, primidone, and zonisamide] in serum/plasma by HPLC using a reverse-phase monolithic column. Serum/heparin plasma (100 μL) was mixed with an internal standard solution (5-ethyl-5-p-tolylbarbituric acid in methanol, 250 μL). After centrifugation at 15,500g for 10 minutes, 15 μL of supernatant was injected into a monolithic column. The analytes were eluted with an isocratic solution of 0.1 M, pH 6.5, phosphate buffer:methanol:acetonitrile (77:20:3), monitored at 210 nm. The chromatography time was 16 minutes. The method was linear from 0.4-4.9 to 21.2-190.9 μg/mL depending on the analytes with analytical recovery of 80%-114%. The inter- and intra-assay coefficients of variation were <8% in 3 levels of serum-based controls for all the analytes. No significant carryover was observed. Commercial controls containing >100 therapeutic drugs and common endogenous substances were tested and showed no interference. Comparison studies for 6 AEDs or metabolites were performed against commercial HPLC methods. Three AEDs were compared with Food and Drug Administration-approved immunoassays. All comparisons had R > 0.96 with slope ranging from 0.86 to 1.20. This is a simple and fast HPLC method suitable for measuring the 10 AEDs or metabolites. The use of the monolithic column resulted in increased sensitivity, better resolution, and a shorter analytical time compared with a regular C18 column.

A fast and simple assay for busulfan in serum or plasma by liquid chromatography–tandem mass spectrometry using turbulent flow online extraction technology

Busulfan is used in myeloablative preparation regimens for hematopoietic bone marrow transplantation. Due to its narrow therapeutic range therapeutic drug monitoring of busulfan is recommended. In this study a fast and simple method for measuring busulfan in serum or plasma by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed utilizing turbulent flow online extraction technology. Serum or plasma was mixed with acetonitrile containing d(8)-busulfan. After centrifugation the supernatant was injected onto a turbulent flow preparatory column then transferred to a C18 analytical column monitored by a tandem mass spectrometer set at positive electrospray ionization. The analytical cycle time was 4.0min. The method was linear from 0.15 to 41.90μmol/L with an accuracy of 87.9-103.0%. Inter- and intra-assay CVs across four concentration levels were 2.1-7.8%. No significant carryover or ion suppression was observed. No interference was observed from commercial control materials containing more than 100 compounds. Comparison with a well established LC-MS/MS method using patient specimens (n=45) showed a mean bias 1.3% with Deming regression of slope 1.02, intercept -0.02μmol/L, and a linear correlation coefficient 0.9883. The LC-MS/MS method coupled with turbulent flow online sample cleaning technology described here offers reliable busulfan quantitation in serum or plasma with minimum manual sample preparation and was fully validated for clinical use.

Highly sensitive measurement of whole blood chromium by inductively coupled plasma mass spectrometry.

OBJECTIVES Chromium (Cr), a trace metal element, is implicated in diabetes and cardiovascular disease. A hypochromic state has been associated with poor blood glucose control and unfavorable lipid metabolism. Sensitive and accurate measurement of blood chromium is very important to assess the chromium nutritional status. However, interferents in biological matrices and contamination make the sensitive analysis challenging. The primary goal of this study was to develop a highly sensitive method for quantification of total Cr in whole blood by inductively coupled plasma mass spectrometry (ICP-MS) and to validate the reference interval in a local healthy population. DESIGN AND METHODS This method was developed on an ICP-MS with a collision/reaction cell. Interference was minimized using both kinetic energy discrimination between the quadrupole and hexapole and a selective collision gas (helium). Reference interval was validated in whole blood samples (n=51) collected in trace element free EDTA tubes from healthy adults (12 males, 39 females), aged 19-64 years (38.8±12.6), after a minimum of 8 h fasting. Blood samples were aliquoted into cryogenic vials and stored at -70 °C until analysis. RESULTS The assay linearity was 3.42 to 1446.59 nmol/L with an accuracy of 87.7 to 99.8%. The high sensitivity was achieved by minimization of interference through selective kinetic energy discrimination and selective collision using helium. The reference interval for total Cr using a non-parametric method was verified to be 3.92 to 7.48 nmol/L. CONCLUSION This validated ICP-MS methodology is highly sensitive and selective for measuring total Cr in whole blood.

Therapeutic drug monitoring of immunosuppressants by liquid chromatography-mass spectrometry.

Immunosuppressant medications allow the transplantation of tens of thousands of allografts per year and consequently have great potential to decrease patient morbidity and mortality. However, some medications have great risk associated with over- and under-dosing leading to adverse effects or allograft rejection, respectively. This necessitates immunosuppressant therapeutic drug monitoring accomplished by immunoassay or liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). The formers accuracy can be hindered by metabolites of immunosuppressant medications, antibodies against these medications and heterophilic antibodies. Although LC-MS/MS has superior specificity which allows it to be less susceptible to interference, this methodology lacks standardization and the necessary throughput. Recent developments in LC-MS/MS quantitation, however, include patient-friendly sample submission as dried blood spots, higher sample throughput and commercialization. Here we critically review recent LC-MS/MS publications (January 2010 to July 2015) on the quantitation of cyclosporine A, tacrolimus, sirolimus and everolimus.

Applications of monolithic solid-phase extraction in chromatography-based clinical chemistry assays

Complex matrices, for example urine, serum, plasma, and whole blood, which are common in clinical chemistry testing, contain many non-analyte compounds that can interfere with either detection or in-source ionization in chromatography-based assays. To overcome this problem, analytes are extracted by protein precipitation, solid-phase extraction (SPE), and liquid–liquid extraction. With correct chemistry and well controlled material SPE may furnish clean specimens with consistent performance. Traditionally, SPE has been performed with particle-based adsorbents, but monolithic SPE is attracting increasing interest of clinical laboratories. Monoliths, solid pieces of stationary phase, have bimodal structures consisting of macropores, which enable passage of solvent, and mesopores, in which analytes are separated. This structure results in low back-pressure with separation capabilities similar to those of particle-based adsorbents. Monoliths also enable increased sample throughput, reduced solvent use, varied support formats, and/or automation. However, many of these monoliths are not commercially available. In this review, application of monoliths to purification of samples from humans before chromatography-based assays will be critically reviewed.

Fast, simple, and sensitive high-performance liquid chromatography method for measuring vitamins A and E in human blood plasma

Vitamins A and E are fat-soluble vitamins that play important roles in several physiological processes. Monitoring their concentrations is needed to detect deficiency and guide therapy. In this study, we developed a high-performance liquid chromatography method to measure the major forms of vitamin A (retinol) and vitamin E (α-tocopherol and γ-tocopherol) in human blood plasma. Vitamins A and E were extracted with hexane and separated on a reversed-phase column using methanol as the mobile phase. Retinol was detected by ultraviolet absorption, whereas tocopherols were detected by fluorescence emission. The chromatographic cycle time was 4.0 min per sample. The analytical measurement range was 0.03-5.14, 0.32-36.02, and 0.10-9.99 mg/L for retinol, α-tocopherol, and γ-tocopherol, respectively. Intr-aassay and total coefficient of variation were <6.0% for all compounds. This method was traceable to standard reference materials offered by the National Institute of Standards and Technology. Reference intervals were established using plasma samples collected from 51 healthy adult donors and were found to be 0.30-1.20, 6.0-23.0, and 0.3-3.2 mg/L for retinol, α-tocopherol, and γ-tocopherol, respectively. In conclusion, we developed and validated a fast, simple, and sensitive high-performance liquid chromatography method for measuring the major forms of vitamins A and E in human plasma.

Long-term intermittent hypoxia elevates cobalt levels in the brain and injures white matter in adult mice.

STUDY OBJECTIVES Exposure to the variable oxygenation patterns in obstructive sleep apnea (OSA) causes oxidative stress within the brain. We hypothesized that this stress is associated with increased levels of redox-active metals and white matter injury. DESIGN Participants were randomly allocated to a control or experimental group (single independent variable). SETTING University animal house. PARTICIPANTS Adult male C57BL/6J mice. INTERVENTIONS To model OSA, mice were exposed to long-term intermittent hypoxia (LTIH) for 10 hours/day for 8 weeks or sham intermittent hypoxia (SIH). MEASUREMENTS AND RESULTS Laser ablation-inductively coupled plasma-mass spectrometry was used to quantitatively map the distribution of the trace elements cobalt, copper, iron, and zinc in forebrain sections. Control mice contained 62 ± 7 ng cobalt/g wet weight, whereas LTIH mice contained 5600 ± 600 ng cobalt/g wet weight (P < 0.0001). Other elements were unchanged between conditions. Cobalt was concentrated within white matter regions of the brain, including the corpus callosum. Compared to that of control mice, the corpus callosum of LTIH mice had significantly more endoplasmic reticulum stress, fewer myelin-associated proteins, disorganized myelin sheaths, and more degenerated axon profiles. Because cobalt is an essential component of vitamin B12, serum methylmalonic acid (MMA) levels were measured. LTIH mice had low MMA levels (P < 0.0001), indicative of increased B12 activity. CONCLUSIONS Long-term intermittent hypoxia increases brain cobalt, predominantly in the white matter. The increased cobalt is associated with endoplasmic reticulum stress, myelin loss, and axonal injury. Low plasma methylmalonic acid levels are associated with white matter injury in long-term intermittent hypoxia and possibly in obstructive sleep apnea.

Quantification of 1,25-Dihydroxyvitamin D2 and D3 in Serum Using Liquid Chromatography-Tandem Mass Spectrometry

1,25-Dihydroxyvitamin D is the active form of vitamin D and plays a critical role in the maintenance of calcium and phosphorous metabolism of the human body. Measurement of 1,25-dihydroxyvitamin D in serum can aid in clinical diagnosis and/or management of renal disease, sarcoidosis, and rare inherited diseases. We present here an effective and accurate method for measuring 1,25-dihydroxyvitamin D3 and 1,25-dihydroxyvitamin D2 by high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) after immunoaffinity extraction. The MS/MS is operated in multiple reaction mode with positive electrospray. Quantification is based on peak area ratios of the analytes to respective deuterated internal standards. This method offered a linear range from 4.0 to 160.0 pg/mL with analytical recovery of 89.9-115.5 % for both 1,25-dihydroxyvitamin D3 and 1,25-dihydroxyvitamin D2.