Duu-Jong Lee

Use of cellulose-based wastes for adsorption of dyes from aqueous solutions

Low-cost banana and orange peels were prepared as adsorbents for the adsorption of dyes from aqueous solutions. Dye concentration and pH were varied. The adsorption capacities for both peels decreased in the order methyl orange (MO) > methylene blue (MB) > Rhodamine B (RB) > Congo red (CR) > methyl violet (MV) > amido black 10B (AB). The isotherm data could be well described by the Freundlich and Langmuir equations in the concentration range of 10-120 mg/l. An alkaline pH was favorable for the adsorption of dyes. Based on the adsorption capacity, it was shown that banana peel was more effective than orange peel. Kinetic parameters of adsorption such as the Langergren rate constant and the intraparticle diffusion rate constant were determined. For the present adsorption process intraparticle diffusion of dyes within the particle was identified to be rate limiting. Both peel wastes were shown to be promising materials for adsorption removal of dyes from aqueous solutions.

Cultivation, photobioreactor design and harvesting of microalgae for biodiesel production: A critical review

Microalgae have the ability to mitigate CO(2) emission and produce oil with a high productivity, thereby having the potential for applications in producing the third-generation of biofuels. The key technologies for producing microalgal biofuels include identification of preferable culture conditions for high oil productivity, development of effective and economical microalgae cultivation systems, as well as separation and harvesting of microalgal biomass and oil. This review presents recent advances in microalgal cultivation, photobioreactor design, and harvesting technologies with a focus on microalgal oil (mainly triglycerides) production. The effects of different microalgal metabolisms (i.e., phototrophic, heterotrophic, mixotrophic, and photoheterotrophic growth), cultivation systems (emphasizing the effect of light sources), and biomass harvesting methods (chemical/physical methods) on microalgal biomass and oil production are compared and critically discussed. This review aims to provide useful information to help future development of efficient and commercially viable technology for microalgae-based biodiesel production.

Aerobic granular sludge: Recent advances

Aerobic granulation, a novel environmental biotechnological process, was increasingly drawing interest of researchers engaging in work in the area of biological wastewater treatment. Developed about one decade ago, it was exciting research work that explored beyond the limits of aerobic wastewater treatment such as treatment of high strength organic wastewaters, bioremediation of toxic aromatic pollutants including phenol, toluene, pyridine and textile dyes, removal of nitrogen, phosphate, sulphate and nuclear waste and adsorption of heavy metals. Despite this intensive research the mechanisms responsible for aerobic granulation and the strategy to expedite the formation of granular sludge, and effects of different operational and environmental factors have not yet been clearly described. This paper provides an up-to-date review on recent research development in aerobic biogranulation technology and applications in treating toxic industrial and municipal wastewaters. Factors affecting granulation, granule characterization, granulation hypotheses, effects of different operational parameters on aerobic granulation, response of aerobic granules to different environmental conditions, their applications in bioremediations, and possible future trends were delineated. The review attempts to shed light on the fundamental understanding in aerobic granulation by newly employed confocal laser scanning microscopic techniques and microscopic observations of granules.

Perspectives on microalgal CO2-emission mitigation systems - A review

The problem of climate change arising mainly from CO₂ emission is currently a critical environmental issue. Biofixation using microalgae has recently become an attractive approach to CO₂ capture and recycling with additional benefits of downstream utilization and applications of the resulting microalgal biomass. This review summarizes the history and strategies of microalgal mitigation of CO₂ emissions, photobioreactor systems used to cultivate microalgae for CO₂ fixation, current microalgae harvesting methods, as well as applications of valuable by-products. It is of importance to select appropriate microalgal species to achieve an efficient and economically feasible CO₂-emission mitigation process. The desired microalgae species should have a high growth rate, high CO₂ fixation ability, low contamination risk, low operation cost, be easy to harvest and rich in valuable components in their biomass.

Microalgae-based biorefinery--from biofuels to natural products.

The potential for biodiesel production from microalgal lipids and for CO2 mitigation due to photoautotrophic growth of microalgae have recently been recognized. Microalgae biomass also has other valuable components, including carbohydrates, long chain fatty acids, pigments and proteins. The microalgae-based carbohydrates consist mainly of cellulose and starch without lignin; thus they can be ready carbon source for the fermentation industry. Some microalgae can produce long chain fatty acids (such as DHA and EPA) as valuable health food supplements. In addition, microalgal pigments and proteins have considerable potential for many medical applications. This review article presents comprehensive information on the current state of these commercial applications, as well as the utilization and characteristics of the microalgal components, in addition to the key factors and challenges that should be addressed during the production of these materials, and thus provides a useful report that can aid the development of an efficient microalgae-based biorefinery process.

Advances in aerobic granule formation and granule stability in the course of storage and reactor operation.

Aerobic granulation is drawing increasing global interest in a quest for an efficient and innovative technology in wastewater treatment. Developed less than two decades ago, extensive research work on aerobic granulation has been reported. The instability of the granule, which is one of the main problems that hinder practical application of aerobic granulation technology, is still to be resolved. This paper presents a review of the literature in aerobic granulation focusing on factors that influence granule formation, granule development and their stability in the context of sludge granulation. The review attempts to shed light on the potential of developing granules with adequate structural stability for practical applications. The possibilities and perspective of using stored granule as inoculums for rapid startup, and as microbial supplement to enhance treatment of bioreactor systems are also discussed.

Micro-sized microbial fuel cell: A mini-review

This review presents the development of micro-sized microbial fuel cells (including mL-scale and μL-scale setups), with summarization of their advantageous characteristics, fabrication methods, performances, potential applications and possible future directions. The performance of microbial fuel cells (MFCs) is affected by issues such as mass transport, reaction kinetics and ohmic resistance. These factors are manipulated in micro-sized MFCs using specially allocated electrodes constructed with specified materials having physically or chemically modified surfaces. Both two-chamber and air-breathing cathodes are promising configurations for mL-scale MFCs. However, most of the existing μL-scale MFCs generate significantly lower volumetric power density compared with their mL-counterparts because of the high internal resistance. Although μL-scale MFCs have not yet to provide sufficient power for operating conventional equipment, they show great potential in rapid screening of electrochemically microbes and electrode performance. Additional possible applications and future directions are also provided for the development of micro-sized MFCs.

Staining of extracellular polymeric substances and cells in bioaggregates

Multiple fluorochrome experiments with as many fluorochromes as possible are desired for exploring the detailed structure of bioaggregates. Spectral peak interference and other practical limitations, however, restrict the maximum number of stains used simultaneously to three. This current study proposes a sixfold labelled scheme to stain the total cells, dead cells, proteins, lipids, and α- and β-polysaccharides in bioaggregates. Two aerobic granule systems, the phenol-fed and the acetate-fed granules, were utilized as the testing samples for demonstrating the use of the proposed scheme.

Dark fermentation on biohydrogen production: pure culture.

Biohydrogen is regarded as an attractive future clean energy carrier due to its high energy content and environmental-friendly conversion. While biohydrogen production is still in the early stage of development, there have been a variety of laboratory- and pilot-scale systems developed with promising potential. This work presents a review of literature reports on the pure hydrogen-producers under anaerobic environment. Challenges and perspective of biohydrogen production with pure cultures are also outlined.

Biohydrogen production from lignocellulosic feedstock.

Due to the recent energy crisis and rising concern over climate change, the development of clean alternative energy sources is of significant interest. Biohydrogen produced from cellulosic feedstock, such as second generation feedstock (lignocellulosic biomass) and third generation feedstock (carbohydrate-rich microalgae), is a promising candidate as a clean, CO2-neutral, non-polluting and high efficiency energy carrier to meet the future needs. This article reviews state-of-the-art technology on lignocellulosic biohydrogen production in terms of feedstock pretreatment, saccharification strategy, and fermentation technology. Future developments of integrated biohydrogen processes leading to efficient waste reduction, low CO2 emission and high overall hydrogen yield is discussed.