Dzmitry H. Zaitsau

Making Sense of Enthalpy of Vaporization Trends for Ionic Liquids: New Experimental and Simulation Data Show a Simple Linear Relationship and Help Reconcile Previous Data

Vaporization enthalpy of an ionic liquid (IL) is a key physical property for applications of ILs as thermofluids and also is useful in developing liquid state theories and validating intermolecular potential functions used in molecular modeling of these liquids. Compilation of the data for a homologous series of 1-alkyl-3-methylimidazolium bis(trifluoromethane-sulfonyl)imide ([C(n)mim][NTf2]) ILs has revealed an embarrassing disarray of literature results. New experimental data, based on the concurring results from quartz crystal microbalance, thermogravimetric analyses, and molecular dynamics simulation have revealed a clear linear dependence of IL vaporization enthalpies on the chain length of the alkyl group on the cation. Ambiguity of the procedure for extrapolation of vaporization enthalpies to the reference temperature 298 K was found to be a major source of the discrepancies among previous data sets. Two simple methods for temperature adjustment of vaporization enthalpies have been suggested. Resulting vaporization enthalpies obey group additivity, although the values of the additivity parameters for ILs are different from those for molecular compounds.

A new method for the determination of vaporization enthalpies of ionic liquids at low temperatures.

A new method for the determination of vaporization enthalpies of extremely low volatile ILs has been developed using a newly constructed quartz crystal microbalance (QCM) vacuum setup. Because of the very high sensitivity of the QCM it has been possible to reduce the average temperature of the vaporization studies by approximately 100 K in comparison to other conventional techniques. The physical basis of the evaluation procedure has been developed and test measurements have been performed with the common ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C(2)mim][NTf(2)] extending the range of measuring vaporization enthalpies down to 363 K. The results obtained for [C(2)mim][NTf(2)] have been tested for thermodynamic consistency by comparison with data already available at higher temperatures. Comparison of the temperature-dependent vaporization enthalpy data taken from the literature show only acceptable agreement with the heat capacity difference of -40 J K(-1) mol(-1). The method developed in this work opens also a new way to obtain reliable values of vaporization enthalpies of thermally unstable ionic liquids.

Thermodynamics of ionic liquids precursors: 1-methylimidazole.

The standard molar enthalpy of formation in the liquid state for 1-methylimidazole (MeIm) was obtained from combustion calorimetry. The enthalpy of vaporization of the compound was derived from the temperature dependence of the vapor pressure measured by the transpiration method. Additionally, the enthalpy of vaporization for MeIm was measured directly using Calvet-type calorimetry. In order to verify the experimental data, first-principles calculations of MeIm were performed. The enthalpy of formation evaluated at the G3MP2 level of theory is in excellent agreement with the experimental value. The heat capacity and parameters of fusion of MeIm were measured in the temperature range (5 to 370) K using adiabatic calorimetry. The thermodynamic functions for the compound in the crystal and liquid states were calculated from these data. Based on the experimental spectroscopic data and the results of quantum-chemical calculations, the ideal-gas properties for MeIm were calculated by methods of statistical thermodynamics.

Vaporization and Formation Enthalpies of 1-Alkyl-3-methylimidazolium Tricyanomethanides

Thermochemical studies of the ionic liquids 1-ethyl-3-methylimidazolium tricyanomethanide [C(2)MIM][C(CN)(3)] and 1-butyl-3-methylimidazolium tricyanomethanide [C(4)MIM][C(CN)(3)] have been performed in this work. Vaporization enthalpies have been obtained using a recently developed quartz crystal microbalance (QCM) technique. The molar enthalpies of formation of these ionic liquids in the liquid state were measured by means of combustion calorimetry. A combination of the results obtained from QCM and combustion calorimetry lead to values of gaseous molar enthalpies of formation of [C(n)MIM][C(CN)(3)]. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids [C(n)MIM][C(CN)(3)] have been performed using the CBS-QB3 and G3MP2 theory and have been compared with the experimental data. Furthermore, experimental results of enthalpies of formation of imidazolium-based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)], and [C(CN)(3)] available in the literature have been collected and checked for consistency using a group additivity procedure. It has been found that the enthalpies of formation of these ionic liquids roughly obey group additivity rules.

Structure–Property Relationships in Ionic Liquids: A Study of the Anion Dependence in Vaporization Enthalpies of Imidazolium‐Based Ionic Liquids

Vaporization enthalpies for a series of ionic liquids (ILs) with the common cation 1-ethyl-3-methylimidazolium [C(2)mim] and different counter anions are determined using a quartz crystal microbalance method. Dependences of vaporization enthalpies on physicochemical parameters specific for cation and anion interactions are revealed. A linear relation between enthalpies of vaporization and the intermolecular vibrational frequencies is observed and suggested for calculation of unknown ILs. A simple group-contribution method is developed for prediction of vaporization enthalpies of alkyl imidazolium-based ILs.

Vaporization Enthalpies of Imidazolium Based Ionic Liquids: Dependence on Alkyl Chain Length

Vaporization enthalpies of a series of ten 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ionic liquids (ILs) [C(n) mim][NTf(2) ] with alkyl chain lengths of n=2, 3, 4, 6, 8, 10, 12, 14, 16, and 18 are determined by using a recently developed quartz crystal microbalance method. Due to the high sensitivity of the microbalance vapor studies can be extended to temperatures 60-100 K lower than those available with other methods. The results reveal a remarkably linear dependence of the vaporization enthalpies on the chain length at the reference temperature of 298 K.

Ionic Liquids: Differential Scanning Calorimetry as a New Indirect Method for Determination of Vaporization Enthalpies

Differential scanning calorimetry (DSC) has been used to measure enthalpies of synthesis reactions of the 1-alkyl-3-methylimidazolium bromide [C(n)mim][Br] ionic liquids from 1-methylimidazole and n-alkyl bromides (with n = 4, 5, 6, 7, and 8). The optimal experimental conditions have been elaborated. Enthalpies of formation of these ionic liquids in the liquid state have been determined using the DSC results according to the Hess Law. The ideal-gas enthalpies of formation of [C(n)mim][Br] were calculated using the methods of quantum chemistry. They were used together with the DSC results to derive indirectly the enthalpies of vaporization of the ionic liquids under study. In order to validate the indirect determination, the experimental vaporization enthalpy of [C(4)mim][Br] was measured by using a quartz crystal microbalance (QCM). The combination of reaction enthalpy measurements by DSC with modern high-level first-principles calculations opens valuable indirect thermochemical options to obtain values of vaporization enthalpies of ionic liquids.

Dispersion and Hydrogen Bonding Rule: Why the Vaporization Enthalpies of Aprotic Ionic Liquids Are Significantly Larger than those of Protic Ionic liquids.

It is well known that gas-phase experiments and computational methods point to the dominance of dispersion forces in the molecular association of hydrocarbons. Estimates or even quantification of these weak forces are complicated due to solvent effects in solution. The dissection of interaction energies and quantification of dispersion interactions is particularly challenging for polar systems such as ionic liquids (ILs) which are characterized by a subtle balance between Coulomb interactions, hydrogen bonding, and dispersion forces. Here, we have used vaporization enthalpies, far-infrared spectroscopy, and dispersion-corrected calculations to dissect the interaction energies between cations and anions in aprotic (AILs), and protic (PILs) ionic liquids. It was found that the higher total interaction energy in PILs results from the strong and directional hydrogen bonds between cation and anion, whereas the larger vaporization enthalpies of AILs clearly arise from increasing dispersion forces between ion pairs.

Thermodynamics of Imidazolium-Based Ionic Liquids Containing PF6 Anions

Imidazolium-based ionic liquids (ILs) with PF6(-) anions are considered as low-cost solvents for separation processes, but they exhibit restricted thermal stabilities. Reliable measurements of vaporization thermodynamics by conventional methods have failed. In this work, we applied a quartz-crystal microbalance method to determine for the first time the absolute vapor pressures for the [Cnmim][PF6] family, with n = 2, 4, 6, 8, and 10, in the temperature range 403-461 K. An absence of decomposition of ILs in experimental conditions was determined by the attenuated total reflection-infrared spectroscopy. The consistency of the experimental results within the homologous series was established through enthalpy and entropy analyses of the liquid and gas phases as well as by molecular dynamics simulations.

Benchmark Thermochemistry for Biologically Relevant Adenine and Cytosine. A Combined Experimental and Theoretical Study.

The thermochemical properties available in the literature for adenine and cytosine are in disarray. A new condensed phase standard (p° = 0.1 MPa) molar enthalpy of formation at T = 298.15 K was measured by using combustion calorimetry. New molar enthalpies of sublimation were derived from the temperature dependence of vapor pressure measured by transpiration and by the quarz-crystal microbalance technique. The heat capacities of crystalline adenine and cytosine were measured by temperature-modulated DSC. Thermodynamic data on adenine and cytosine available in the literature were collected, evaluated, and combined with our experimental results. Thus, the evaluated collection of data together with the new experimental results reported here has helped to resolve contradictions in the available enthalpies of formation. A set of reliable thermochemical data is recommended for adenine and cytosine for further thermochemical calculations. Quantum-chemical calculations of the gas phase molar enthalpies of formation of adenine and cytosine have been performed by using the G4 method and results were in excellent agreement with the recommended experimental data. The standard molar entropies of formation and the standard molar Gibbs functions of formation in crystal and gas state have been calculated. Experimental vapor-pressure data measured in this work were used to estimate pure-component PC-SAFT parameters. This allowed modeling solubility of adenine and cytosine in water over the temperature interval 278-310 K.