E. Carballo

Isobaric thermal expansivity and thermophysical characterization of liquids and liquid mixturesElectronic Supplementary Information available. See http://www.rsc.org/suppdata/cp/b1/b104891k/

A methodology for the thermophysical characterization of liquids and liquid mixtures based on measurements of density, sound speed and isobaric heat capacity per unit volume at atmospheric pressure as a function of temperature is proposed. Density and sound speed data are used to determine the isentropic compressibility from the Laplace equation. The precision in density measurements allows one to obtain the isobaric thermal expansivity at different temperatures using an incremental procedure with quite acceptable accuracy and precision. The isothermal compressibility and isochoric molar heat capacity are both obtained from the previous properties, using well-known thermodynamic relations. The accuracy of the proposed methodology was checked by determining the above-mentioned properties for liquid n-hexane, n-heptane, n-octane, n-dodecane, n-hexadecane, cyclohexane, and toluene over the temperature range (288.15–333.15) K and comparing the results with selected reported data. The average absolute deviations from the latter showed data obtained with the proposed methodology to be reasonably accurate. The excess quantities for nine binary mixtures of the cyclohexane + n-dodecane system were also determined with a view to assessing precision, which was found to be quite good as regards the dependence on both composition and temperature.

Highly precise determination of the heat capacity of liquids by DSC: calibration and measurement

Abstract The heat capacities of various liquids were determined with a high precision using differential scanning calorimetry. The calibration and measurement procedures, as implemented on a Setaram Micro DSC II calorimeter based on Calvet’s differential detection of the heat flow rate in the measuring and reference vessels are analysed and discussed. An experimental procedure for determining heat capacities based on the scanning method is proposed. Calibration is done with liquids of known heat capacity. The proposed method was checked against various standard liquids. The results of ensuing scanning method are compared with those obtained by using the isothermal step method.

Effect of temperature on W-shaped excess molar heat capacities and volumetric properties : Oxaalkane-nonane systems

Excess molar volumesVmf of the mixtures diglyme (2,5,8-trioxanonane: TON), triglyme (2.5,8,11-tetraoxadodecane: TODD), or tetraglyme (2,5,8,11,14-pen-taoxapentadecane: POPD; E181)+n-nonane have been obtained from density measurements at 278.15, 288.15,298.15, and 308. 15 K. In addition, a micro DSC II differential scanning calorimeter was used to obtain excess molar heat capacitiesCpE at constant pressure for the same mixtures except for TON+n-nonane and at the same temperatures except for 278.15 K. These results allowed us to calculate the following mixing quantities in the complete range of concentration: α(∂Vmυ/∂T)p, and (∂Hυ/∂p)nT at 298.15K. The excess molar volumes are positive with large maximum values located in the central concentration range with the exception of POPD +n-nonane at 278.15 K, which has a central miscibility gap. For these mixtures,CpF has a W-shaped concentration dependence: two minima separated by a maximum.

Excess volumes and excess heat capacities of nitromethane+(1-propanol or 2-propanol)

Abstract Densities and heat capacities of binary mixtures containing nitromethane+(1-propanol or 2-propanol) were determined at the temperatures (288.15, 293.15, 298.15, and 308.15) K and atmospheric pressure, over the whole composition range. Excess molar volumes and excess molar isobaric heat capacities were calculated from the results thus obtained. The effect of specific interactions on the excess properties, and the dependence on the position of the OH group in the alkanol, are analysed.

Second-order excess derivatives for the 1,3-dichloropropane + n-dodecane system

An experimental study of the behaviour of the second-order excess derivatives against composition and temperature for the 1,3-dichloropropane + n-dodecane system is presented. To this end, densities and speeds of sound were obtained in the interval 278.15-328.15 K with a step of 1 K. In addition, isobaric molar heat capacities were obtained in the temperature range 283.15-323.15 K. Measurements were performed over the whole composition range and at atmospheric pressure. Isentropic compressibilities were determined using the Laplace equation, and isobaric thermal expansivities were obtained in the interval 283.15-323.15 K from density data. Isothermal compressibilities and isochoric molar heat capacities within 283.15-323.15 K were derived from the above-mentioned properties via appropriate thermodynamic relations. The excess quantities for these properties were calculated using the ideality criterion first proposed by Benson and Kiyohara. Destruction of the 1,3-dichloropropane dipolar order during mixing appears to be the main effect to which the excess properties are sensitive.

Temperature dependence of the volumetric properties of binary mixtures containing oxaalkane + n-heptane

Excess molar volumes of mixtures of n-heptane + 2,5-dioxahexane and n-heptane + 2,5,8-trioxanonane were determined from density measurentents at 5, 15, 25 and 35°C. These results allowed the following mixing quantities to be reported in all range of concentrations: α, (δvE/δT)P and (δhE/δP)T, at 25°C. The obtained values were then compared with the calculated values by using the Flory theory and the Nitta-Chao theory of liquid mixtures. The results are discussed in terms of order or disorder creation.

Excess quantities of dialkyl carbonate + cyclohexane mixtures at a variable temperature

The density at 288.15, 293.15, 298.15 and 308.15 K, sound speed at 298.15 K, and isobaric molar heat capacity at 288.15, 298.15 and 308.15 K, of binary mixtures of cyclohexane with dimethyl carbonate or diethyl carbonate at atmospheric pressure were measured throughout the composition range. The data were used to calculate the excess quantities for the following properties: molar volumes, isentropic and isothermal compressibilities, isobaric thermal expansivity, and isobaric and isochoric molar heat capacities. As a rule, these excess quantities were substantially greater for the mixtures containing dimethyl carbonate than for those of diethyl carbonate. The excess isobaric molar heat capacity of both mixtures was found to exhibit a W-shaped variation with composition. Unlike its variation with the excess volumes, changes in this quantity as a function of temperature are non-linear.

Excess heat capacities of glyme[ndash ]alkane mixtures Influence of the upper critical solution temperature

Differential scanning calorimetry has been used to determine the excess heat capacity of liquid mixtures of triglyme and tetraglyme with cyclohexane, and tetraglyme with n-heptane, at 288.15, 298.15 and 308.15 K, at atmospheric pressure, throughout the composition range. The curves thus obtained as a function of composition were found to be W-shaped. The results are compared with those for other glyme–alkane mixtures. Changes in the W-shaped curves with temperature were virtually linear for mixtures which have an upper critical solution temperature (UCST) relatively distant from the measuring range; by contrast, excess heat capacities increased asymptotically near the phase separation region. The results are discussed in terms of order creation in the mixture that arises from concentration fluctuations near the UCST.

Thermodynamic properties of polyoxyethyleneglycol dimethyl ether+n-alkane mixtures

Abstract Excess molar volumes V m E at 278.15, 288.15, 298.15 and 308.15 K and atmospheric pressure were obtained from density measurements with a vibrating-tube densimeter for the mixtures CH 3 O(CH 2 CH 2 O) m CH 3 ( m =2, diglyme; m =3, triglyme; m =4, tetraglyme)+ n -dodecane. These results allowed us to calculate isobaric thermal expansivities α at 298.15 K. We also report excess molar isobaric heat capacities C p E at atmospheric pressure measured with a micro DSC II differential scanning calorimeter for the systems triglyme+ n -heptane at 288.15, 298.15 and 308.15 K and triglyme+ n -dodecane at 283.15, 288.15, 298.15 and 308.15 K.

Temperature dependence of the volumetric properties of binary mixtures containing oxaalkane + c-hexane

Excess molar volumes of mixtures of 2,5-dioxahexane + c-hexane, 2,5,8-trioxanonane + c-hexane, 2,5,8,11-tetraoxadodecane + c-hexane, and 2,5,8,11,14-pentaoxapentadecane + c-hexane were determined from density measurements at 283.15, 288.15, 298.15, and 308.15 K. These results allowed the following mixing quantities to be reported in the range of concentration: α, (δVE/δT)P, and (δHE/δP)T, at 298.15 K. The values obtained were then compared with the values calculated by using the Flory theory and the Nitta–Chao theory of liquid mixtures.