E. V. Chernikova

Effect of comonomer composition on the controlled free-radical copolymerization of styrene and maleic anhydride by reversible addition-fragmentation chain transfer (RAFT)

Controlled free-radical copolymerization of styrene and maleic anhydride was performed in 1,4-dioxane or tetrahydrofurane solution at 60 °C using the RAFT technique. The effect of monomer feed ratio on copolymerization kinetics and on control over molar mass distribution was examined. It was shown that polymerization was faster and quality of control was poorer when the proportion of maleic anhydride in the monomer feed was larger. These features were assigned to a decrease in the chain transfer constant of the polymeric RAFT agent, most probably due to an increase in the apparent rate constant of propagation with the proportion of maleic anhydride.

Controlled radical polymerization of styrene and n-butyl acrylate mediated by trithiocarbonates

The free-radical bulk homopolymerization of styrene and n-butyl acrylate at 80°C mediated by dibenzyl trithiocarbonate, poly(styryl) trithiocarbonate, or poly(n-butyl acrylate) trithiocarbonate as reversible addition-fragmentation chain-transfer agents has been studied. It has been shown that the use of low-and high-molecular-mass reversible addition-fragmentation chain-transfer agents makes it possible to efficiently control the molecular-mass characteristics of polymers. In the case of styrene, the rate of polymerization slightly depends on the concentration of the addition-fragmentation chain-transfer agent. In contrast, for the polymerization of n-butyl acrylate, the rate significantly decreases with the concentration of the chain-transfer agent. Formation of radical intermediates during the polymerization of styrene and n-butyl acrylate mediated by trithiocarbonates has been studied by ESR spectroscopy. It has been demonstrated that the polymeric chain-transfer agents are efficient for the synthesis of block copolymers with the controlled block length.

Controlled radical polymerization of styrene mediated by dithiobenzoates as reversible addition-fragmentation chain-transfer agents

The radical polymerization of styrene at 60 and 80°C mediated by benzyl dithiobenzoate and poly(styrene dithiobenzoate) as reversible addition-fragmentation chain-transfer agents has been studied. It has been shown that both agents are characterized by high chain-transfer constants and provide control over molecular-mass characteristics of polymerization products. The number-average molecular mass of polystyrene linearly grows with conversion, and the polymers are characterized by low values of polydispersity indexes. It has been demonstrated that the rate of polymerization significantly decreases with an increase in the concentration of reversible addition-fragmentation chain-transfer agents. This effect is typical of styrene polymerization mediated by dithiobenzoates. The possible reasons for this phenomenon are discussed.

Controlled synthesis of acrylic homo- and copolymers in the presence of trithiocarbonates as reversible addition-fragmentation chain transfer agents

Formation of homo- and copolymers of various structures (random and block) based on tert-butyl acrylate and n-butyl acrylate via polymerization mediated by trithiocarbonates as reversible addition-fragmentation chain-transfer agents has been studied. The process is found to proceed according to a three-stage mechanism. As a result, it is possible to synthesize symmetric triblock copolymers with the use of polymer trithiocarbonates; the polymer reversible addition-fragmentation chain transfer agent predetermines the composition and molecular mass of end blocks, the composition of the monomer mixture determines the structure of the central block, and the concentration of the agent and the conversion of the monomers define its molecular-mass characteristics. The modification of polymerization products gives rise to amphiphilic copolymers.

Free-radical polymerization of methyl methacrylate in the presence of dithiobenzoates as reversible addition-fragmentation chain transfer agents

The pseudoliving radical polymerization of methyl methacrylate in bulk mediated by dithiobenzoates with various leaving groups as reversible addition-fragmentation chain-transfer agents has been studied. It has been shown that polymerization proceeds under conditions of the low steady-state concentration of radical intermediates; as a result, the steady-state of the process is rapidly achieved even at low conversions. Retardation of polymerization observed at high concentrations of reversible addition-fragmentation chain-transfer agents is apparently associated with the occurrence of chain termination reactions involving intermediates, as evidenced by the model reaction. The autoacceleration of polymerization is suppressed with an increase in the concentration of reversible addition-fragmentation chain-transfer agents. An efficient approach to the synthesis of a narrow-dispersed PMMA with the controlled molecular mass has been suggested.

Controlled Synthesis of Polyacrylonitrile via Reversible Addition-Fragmentation Chain-Transfer Pseudoliving Radical Polymerization and Its Thermal Behavior

The polymerization of acrylonitrile mediated by various trithiocarbonates as reversible addition-fragmentation chain-transfer agents is studied. It is shown that, when polymerization is performed in DMSO, a narrowly dispersed PAN with a controlled molecular mass can be prepared. The pseudoliving radical polymerization of acrylonitrile is conducted for the first time via the reversible addition-fragmentation chaintransfer mechanism in carbon dioxide at an increased pressure. The structure of the polymers is investigated via NMR and IR spectroscopy. As shown by DSC and IR pyrolysis, the thermal behavior of PAN is determined by its molecular mass, the width of the molecular-mass distribution, and the conditions of synthesis. The incorporation of functional groups of the reversible addition-fragmentation chain-transfer agent into a macromolecule changes the structure of the polyconjugated system and makes it possible to control the conditions of its formation.

Thioketone‐Mediated Polymerization with Dithiobenzoates: Proof for the Existence of Stable Radical Intermediates in RAFT Polymerization

A novel dithioester control agent [dimethyltetrathioterephtalate (DMTTT)] is presented for the thioketone-mediated radical polymerization (TKMP) of n-butyl acrylate. The rate of polymerization is significantly decreased in the presence of DMTTT indicating formation of dormant radical species. During polymerization, molar masses increase linearly with monomer conversion with reasonably narrow initial molar mass distributions (PDI between 1.3 and 1.8), whereas the dispersity increases during the course of the polymerization due to irreversible termination of both propagating and dormant radicals. The present results thus highlight the possibility of a mixed mechanism operating in RAFT polymerization, which combines slow fragmentation (long-lived intermediates) and intermediate radical termination.

Controlled synthesis of multiblock copolymers by pseudoliving radical polymerization via the reversible addition-fragmentation chain-transfer mechanism

With the use of two classes of reversible addition-fragmentation chain-transfer agents—dithiobenzoates and trithiocarbonates—multiblock copolymers based on styrene and n-butyl acrylate, which are the best-studied monomers in these processes, are synthesized. It is shown that the polymers containing dithiobenzoate and trithiocarbonate groups are highly efficient for the synthesis of block copolymers, which is independent of the number of stages at which the polymeric RAFT agents are used in polymerization: In all cases, the polymeric RAFT agent is fully consumed in the polymerization of the “alien” monomer. The mechanism governing chain formation during the synthesis of multiblock copolymers, that is, the character of monomer insertion into the polymer chain, via one or both ends, is studied. It is found that the order of monomer loading determines the ratio of chains growing through one or two ends. The thermal stability of amphiphilic multiblock copolymers, their solubility in various solvents, and self-organizing ability are investigated.

Controlled radical copolymerization of N-vinylpyrrolidone with 1,1,1,3,3,3-hexafluoroisopropyl-α-fluoroacrylate

Narrow disperse copolymers of N-vinylpyrrolidone with 1,1,1,3,3,3-hexafluoroisopropyl-α-fluoroacrylate have been prepared for the first time by reversible addition fragmentation chain transfer pseudo-living radical polymerization in the presence of benzyl dithiobenzoate. The relative activities of the monomers indicating the occurrence of alternating copolymerization have been estimated. The copolymerization of equimolar N-vinylpyrrolidone-1,1,1,3,3,3-hexafluoroisopropyl-α-fluoroacrylate mixtures shows typical features of reversible addition fragmentation chain transfer pseudoliving radical polymerization: deceleration of polymerization compared to the classical radical process, degeneration of the gel effect, successive increase in the number-average molecular mass with conversion, and formation of narrow disperse copolymers.

Pseudoliving radical polymerization of methyl methacrylate in the presence of S,S′-bis(methyl-2-isobutyrate) trithiocarbonate

The polymerization of MMA mediated by symmetric trithiocarbonate as a reversible addition-fragmentation chain-transfer agent is studied. It is shown that the process proceeds according to the two-stage pseudoliving radical mechanism. The polymeric reversible addition-fragmentation chain-transfer agent is more efficient than its low-molecular-mass analog. The use of the polymeric reversible addition-fragmentation chain-transfer agent makes it possible to synthesize narrowly dispersed homopolymers of MMA and related copolymers with a controllable molecular mass. Both chain-transfer agents have practically no effect on the initial rate of copolymerization but allow weakening or even suppression of the gel effect at high conversions.