E. Young

Performance and on-sky optical characterization of the SPTpol instrument

In January 2012, the 10m South Pole Telescope (SPT) was equipped with a polarization-sensitive camera, SPTpol, in order to measure the polarization anisotropy of the cosmic microwave background (CMB). Measurements of the polarization of the CMB at small angular scales (~several arcminutes) can detect the gravitational lensing of the CMB by large scale structure and constrain the sum of the neutrino masses. At large angular scales (~few degrees) CMB measurements can constrain the energy scale of Inflation. SPTpol is a two-color mm-wave camera that consists of 180 polarimeters at 90 GHz and 588 polarimeters at 150 GHz, with each polarimeter consisting of a dual transition edge sensor (TES) bolometers. The full complement of 150 GHz detectors consists of 7 arrays of 84 ortho-mode transducers (OMTs) that are stripline coupled to two TES detectors per OMT, developed by the TRUCE collaboration and fabricated at NIST. Each 90 GHz pixel consists of two antenna-coupled absorbers coupled to two TES detectors, developed with Argonne National Labs. The 1536 total detectors are read out with digital frequency-domain multiplexing (DfMUX). The SPTpol deployment represents the first on-sky tests of both of these detector technologies, and is one of the first deployed instruments using DfMUX readout technology. We present the details of the design, commissioning, deployment, on-sky optical characterization and detector performance of the complete SPTpol focal plane.

Feedhorn-coupled TES polarimeter camera modules at 150 GHz for CMB polarization measurements with SPTpol

The SPTpol camera is a dichroic polarimetric receiver at 90 and 150 GHz. Deployed in January 2012 on the South Pole Telescope (SPT), SPTpol is looking for faint polarization signals in the Cosmic Microwave Background (CMB). The camera consists of 180 individual Transition Edge Sensor (TES) polarimeters at 90 GHz and seven 84-polarimeter camera modules (a total of 588 polarimeters) at 150 GHz. We present the design, dark characterization, and in-lab optical properties of the 150 GHz camera modules. The modules consist of photolithographed arrays of TES polarimeters coupled to silicon platelet arrays of corrugated feedhorns, both of which are fabricated at NIST-Boulder. In addition to mounting hardware and RF shielding, each module also contains a set of passive readout electronics for digital frequency-domain multiplexing. A single module, therefore, is fully functional as a miniature focal plane and can be tested independently. Across the modules tested before deployment, the detectors average a critical temperature of 478 mK, normal resistance RN of 1.2Ω , unloaded saturation power of 22.5 pW, (detector-only) optical efficiency of ~ 90%, and have electrothermal time constants < 1 ms in transition.

Design and characterization of 90 GHz feedhorn-coupled TES polarimeter pixels in the SPTpol camera

The SPTpol camera is a two-color, polarization-sensitive bolometer receiver, and was installed on the 10 meter South Pole Telescope in January 2012. SPTpol is designed to study the faint polarization signals in the Cosmic Microwave Background, with two primary scientific goals. One is to constrain the tensor-to-scalar ratio of perturbations in the primordial plasma, and thus constrain the space of permissible in inflationary models. The other is to measure the weak lensing effect of large-scale structure on CMB polarization, which can be used to constrain the sum of neutrino masses as well as other growth-related parameters. The SPTpol focal plane consists of seven 84-element monolithic arrays of 150 GHz pixels (588 total) and 180 individual 90 GHz single- pixel modules. In this paper we present the design and characterization of the 90 GHz modules.

Stability of Al-Mn Transition Edge Sensors for Frequency Domain Multiplexing

We are developing arrays of 150 GHz transition edge sensor (TES) polarimeters for the South Pole Telescope polarimeter (SPTpol). Prototype devices use an aluminum manganese (Al-Mn) alloy TES with a normal resistance Rn suited to frequency domain multiplexing (fMUX) used in SPTpol. Using the fMUX readout, the devices exhibit noise performance consistent with expectations when R >; 0.8Rn. Below 0.8Rn, the detectors have high loopgain and become unstable, which is predicted by use of a compound TES model. We address this issue in a recent fabrication with increased TES heat capacity and normal metal structures on the TES to tune the temperature sensitivity.

Progress on ANL/KICP Bolometers for SPTpol

We present progress on Argonne/KICP TES bolometers fabricated at Argonne National Labs. These detectors will be used to measure the polarization of the Cosmic Microwave Background radiation with SPTpol. The sensors are bolometers consisting of a Mo/Au transition edge sensors (TES) suspended on silicon nitride with a gold bar absorber to couple radiation to the device. We present optical measurements and thermal characterizations of prototype devices.

South Pole Telescope software systems: control, monitoring, and data acquisition

We present the software system used to control and operate the South Pole Telescope. The South Pole Telescope is a 10-meter millimeter-wavelength telescope designed to measure anisotropies in the cosmic microwave background (CMB) at arcminute angular resolution. In the austral summer of 2011/12, the SPT was equipped with a new polarization-sensitive camera, which consists of 1536 transition-edge sensor bolometers. The bolometers are read out using 36 independent digital frequency multiplexing (DfMux) readout boards, each with its own embedded processors. These autonomous boards control and read out data from the focal plane with on-board software and firmware. An overall control software system running on a separate control computer controls the DfMux boards, the cryostat and all other aspects of telescope operation. This control software collects and monitors data in real-time, and stores the data to disk for transfer to the United States for analysis.

Optical efficiency of feedhorn-coupled TES polarimeters for next-generation CMB instruments

The next generation of Cosmic Microwave Background (CMB) experiments probing for signals of inflation and small angular scale polarization anisotropies require higher sensitivity and better control of systematics. We are developing monolithic arrays of orthomode transducer (OMT) coupled transition edge sensor (TES) polarimeters designed for operation at 150 GHz to address these requirements. OMT coupling allows for simultaneous and independent detection of two orthogonal linear polarization states incident on a single pixel. We present measurements of optical efficiencies ηop of single pixels with on-chip band-defining filters, with ηop = 57±4 stat±9 sys %. We also provide evidence for an out-of-band blue leak and address possible sources as well as mitigation techniques. Additionally, we discuss methods for increasing efficiency being implemented in the next generation of pixels, currently in fabrication. Still under development, these pixels are produced as monolithic polarimeter arrays and are slated for use in the Atacama Cosmology Telescope Polarization (ACTpol) and South Pole Telescope Polarization (SPTpol) experiments, while single-pixel polarimeters are to be deployed in the Atacama B-mode Search (ABS) experiment.