Edgar H. H. Wong

Combating multidrug-resistant Gram-negative bacteria with structurally nanoengineered antimicrobial peptide polymers

With the recent emergence of reports on resistant Gram-negative ‘superbugs’, infections caused by multidrug-resistant (MDR) Gram-negative bacteria have been named as one of the most urgent global health threats due to the lack of effective and biocompatible drugs. Here, we show that a class of antimicrobial agents, termed ‘structurally nanoengineered antimicrobial peptide polymers’ (SNAPPs) exhibit sub-μM activity against all Gram-negative bacteria tested, including ESKAPE and colistin-resistant and MDR (CMDR) pathogens, while demonstrating low toxicity. SNAPPs are highly effective in combating CMDR Acinetobacter baumannii infections in vivo, the first example of a synthetic antimicrobial polymer with CMDR Gram-negative pathogen efficacy. Furthermore, we did not observe any resistance acquisition by A. baumannii (including the CMDR strain) to SNAPPs. Comprehensive analyses using a range of microscopy and (bio)assay techniques revealed that the antimicrobial activity of SNAPPs proceeds via a multimodal mechanism of bacterial cell death by outer membrane destabilization, unregulated ion movement across the cytoplasmic membrane and induction of the apoptotic-like death pathway, possibly accounting for why we did not observe resistance to SNAPPs in CMDR bacteria. Overall, SNAPPs show great promise as low-cost and effective antimicrobial agents and may represent a weapon in combating the growing threat of MDR Gram-negative bacteria.

Modulating Antimicrobial Activity and Mammalian Cell Biocompatibility with Glucosamine-Functionalized Star Polymers

The development of novel reagents and antibiotics for combating multidrug resistance bacteria has received significant attention in recent years. In this study, new antimicrobial star polymers (14-26 nm in diameter) that consist of mixtures of polylysine and glycopolymer arms were developed and were shown to possess antimicrobial efficacy toward Gram positive bacteria including methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus (VRE) (with MIC values as low as 16 μg mL(-1)) while being non-hemolytic (HC50 > 10,000 μg mL(-1)) and exhibit excellent mammalian cell biocompatibility. Structure function analysis indicated that the antimicrobial activity and mammalian cell biocompatibility of the star nanoparticles could be optimized by modifying the molar ratio of polylysine to glycopolymers arms. The technology described herein thus represents an innovative approach that could be used to fight deadly infectious diseases.

The effect of soft nanoparticles morphologies on thin film composite membrane performance

Well-defined branched and densely cross-linked soft nanoparticles (SNPs) were synthesized and incorporated into a poly(ether-b-amide) (Pebax®) matrix to form the selective layer of thin film composite (TFC) membranes. The fabricated TFC membranes exhibited distinct gas separation abilities. These results reveal the effect of SNP morphologies on the membrane performance. This study may provide insights and novel strategies to fabricate highly permeable membrane materials for carbon dioxide (CO2) capture.

Rational Design of Single-Chain Polymeric Nanoparticles That Kill Planktonic and Biofilm Bacteria

Infections caused by multidrug-resistant bacteria are on the rise and, therefore, new antimicrobial agents are required to prevent the onset of a postantibiotic era. In this study, we develop new antimicrobial compounds in the form of single-chain polymeric nanoparticles (SCPNs) that exhibit excellent antimicrobial activity against Gram-negative bacteria (e.g., Pseudomonas aeruginosa) at micromolar concentrations (e.g., 1.4 μM) and remarkably kill ≥99.99% of both planktonic cells and biofilm within an hour. Linear random copolymers, which comprise oligoethylene glycol (OEG), hydrophobic, and amine groups, undergo self-folding in aqueous systems due to intramolecular hydrophobic interactions to yield these SCPNs. By systematically varying the hydrophobicity of the polymer, we can tune the extent of cell membrane wall disruption, which in turn governs the antimicrobial activity and rate of resistance acquisition in bacteria. We also show that the incorporation of OEG groups into the polymer design is essential in preventing complexation with proteins in biological medium, thereby maintaining the antimicrobial efficacy of the compound even in in vivo mimicking conditions. In comparison to the last-resort antibiotic colistin, our lead agents have a higher therapeutic index (by ca. 2-3 times) and hence better biocompatibility. We believe that the SCPNs developed here have potential for clinical applications and the information pertaining to their structure-activity relationship will be valuable toward the general design of synthetic antimicrobial (macro)molecules.

Factors influencing the growth and topography of nanoscale films fabricated by ROMP-mediated continuous assembly of polymers

The continuous assembly of polymers (CAP) mediated via ring-opening metathesis polymerization (ROMP) is demonstrated as a simple and versatile method to fabricate tailored nanostructured thin films. The film thickness and topography were highly dependent upon the variation of different factors that influence the ROMP reaction and mechanism of the assembly process. Herein, we present a detailed investigation of the influence of various parameters on the rate of film formation, the film thickness and the film topography. Whereas the macrocross-linker concentration and molecular weight determined the final film thickness and surface coverage, the initiator concentration and ROMP catalyst activity were found to have a negligible effect on the film properties. Importantly, the minimum amount of polymerizable moieties required in the macrocross-linker to obtain fine control over film thickness and high surface coverage was found to be 7 mol%. The addition of excess ligand (≤100 mM) for the catalyst increased the catalyst lifetime leading to thicker films, although further increases (>100 mM) were found to retard the metathesis reaction. These findings provide valuable insights into the CAPROMP process and will contribute toward developing the next generation of CAP ultrathin films for advanced applications.

Quantitative formation of core cross-linked star polymers via a one-pot two-step single electron transfer-living radical polymerization

A novel and highly efficient one-pot two-step strategy towards core cross-linked star polymers based on single electron transfer-living radical polymerization (SET-LRP) is described. Macroinitiators with high end-group fidelity were generated at high monomer conversions prior to the addition of cross-linkable monomers in the same pot to induce the formation of star polymers. Quantitative (>99%) star formation is achieved without the purification of unreacted monomers or macroinitiators.

Peptide-Based Star Polymers as Potential siRNA Carriers

16- and 32-arm star polymers were synthesised using poly(amido amine) (PAMAM) dendrimers as multifunctional initiators for the ring-opening polymerisation (ROP) of ϵ-Z-l-lysine N-carboxyanhydride (Lys NCA) via the core-first approach. The resulting star polymers were subsequently post-functionalised with poly(ethylene glycol) (PEG) via carbodiimide coupling, potentially improving the biodistribution of the stars in vivo. De-protection of the carboxybenzyl (Cbz)-protected star arms yielded water-soluble cationic poly(l-lysine) (PLL) star polymers with hydrodynamic radii ranging from 2.0 to 3.3 nm. Successful complexation of the PLL star polymers with double-stranded oligodeoxynucleotides (ODNs)—a mimic for small interfering RNA (siRNA)—was achieved at a nitrogen-to-phosphate (N/P) ratio of 5. Cell viability studies using HEK293T cells indicated the ‘safe’ concentration for these polymers is within a suitable window for the delivery of siRNA therapeutics.

Low-Fouling, Biospecific Films Prepared by the Continuous Assembly of Polymers

We report that the continuous assembly of polymers (CAP) approach, mediated by ring-opening metathesis polymerization (ROMP), is a facile and versatile technology to prepare engineered nanocoatings for various biomedical applications. Low-fouling coatings on particles were obtained by the formation of multicompositional, layered films via simple and efficient tandem CAP(ROMP) processes that are analogous to chain extension reactions. In addition, the CAP(ROMP) approach allows for the efficient postfunctionalization of the CAP films with bioactive moieties via cross-metathesis reactions between the surface-immobilized catalysts and symmetrical alkene derivatives. The combined features of the CAP(ROMP) approach (i.e., versatile polymer selection and facile functionalization) allow for the fabrication and surface modification of various types of polymer films, including those with intrinsic protein-repellent properties and selective protein recognition capabilities. This study highlights the various types of advanced coatings and materials that the CAP approach can be used to generate, which may be useful for biomedical applications.

Photocontrolled Cargo Release from Dual Cross-Linked Polymer Particles.

Burst release of a payload from polymeric particles upon photoirradiation was engineered by altering the cross-linking density. This was achieved via a dual cross-linking concept whereby noncovalent cross-linking was provided by cyclodextrin host-guest interactions, and irreversible covalent cross-linking was mediated by continuous assembly of polymers (CAP). The dual cross-linked particles (DCPs) were efficiently infiltrated (∼80-93%) by the biomacromolecule dextran (molecular weight up to 500 kDa) to provide high loadings (70-75%). Upon short exposure (5 s) to UV light, the noncovalent cross-links were disrupted resulting in increased permeability and burst release of the cargo (50 mol % within 1 s) as visualized by time-lapse fluorescence microscopy. As sunlight contains UV light at low intensities, the particles can potentially be incorporated into systems used in agriculture, environmental control, and food packaging, whereby sunlight could control the release of nutrients and antimicrobial agents.

Assembly of Free-Standing Polypeptide Films via the Synergistic Combination of Hyperbranched Macroinitiators, the Grafting-From Approach, and Cross-Chain Termination

Cross-linked polypeptide-based films are fabricated via a novel and robust method employing surface-initiated ring opening polymerization of α-amino acid N-carboxyanhydrides (NCA-ROP). The judicious combination of amine-based hyperbranched macroinitiators and benzyl ester-protected NCA derivatives promotes network formation by cross-chain terminations, which allows the formation of stable cross-linked peptide-based capsules in a one-pot system.