Edoardo Monaco

Revision Anterior Cruciate Ligament Reconstruction with Doubled Semitendinosus and Gracilis Tendons and Lateral Extra-Articular Reconstruction

BACKGROUND The outcome of revision anterior cruciate ligament reconstruction has only rarely been reported. The purpose of this study was to evaluate the results of revision anterior cruciate ligament surgery with use of an autogenous doubled semitendinosus and gracilis graft in association with an extra-articular procedure. METHODS Between 1997 and 2003, thirty patients underwent a repeat reconstruction of a previously reconstructed torn anterior cruciate ligament with use of a doubled semitendinosus and gracilis graft combined with an extra-articular reconstruction. Primary reconstruction had been done with an autogenous patellar tendon graft in twenty-six patients and with a prosthetic ligament in four patients; the average time from the primary reconstruction to the revision was five years. Functional outcomes, graft survival, and radiographic outcomes were evaluated at a mean of five years. A graft was considered to have failed when a revision was done or when the side-to-side difference on KT-1000 arthrometer testing was >5 mm and/or the pivot-shift test grade was greater than a trace. RESULTS One patient underwent another revision reconstruction because of graft failure at three years postoperatively. The mean International Knee Documentation Committee (IKDC) subjective knee score for the remaining twenty-nine patients was 84 +/- 12 points, and the mean Lysholm knee score was 90 +/- 10 points. The side-to-side difference as measured with the KT-1000 arthrometer with maximum manual force was <3 mm in twenty patients (of the twenty-eight who returned for follow-up), between 3 and 5 mm in six patients, and >5 mm in two patients. The result of the pivot shift examination was normal in fifteen patients, slightly positive in eleven patients, and positive in two patients. Twenty-five percent of the patients showed no radiographic signs of degenerative joint disease. CONCLUSIONS Revision anterior cruciate ligament reconstruction with use of an autogenous doubled semitendinosus and gracilis graft combined with an extra-articular procedure provided satisfactory functional outcomes, with a failure rate of 10%.

Double-Bundle Anterior Cruciate Ligament Reconstruction A Computer-Assisted Orthopaedic Surgery Study

Background The biomechanical function of single-bundle anterior cruciate ligament reconstruction, in cadaveric studies, is successful in limiting anterior tibial translation in response to an anterior tibial load but seems to be insufficient to control a combined rotator load of internal and valgus torque. Anatomical double-bundle anterior cruciate ligament reconstruction might produce a better biomechanical outcome. Hypothesis The addition of the posterolateral bundle to the anteromedial bundle, in an in vivo double-bundle computer-assisted anterior cruciate ligament reconstruction, is able to reduce internal rotation of the tibia at 30° of knee flexion, compared with a standard single-bundle reconstruction. Study Design Controlled laboratory study. Methods Twenty consecutive anterior cruciate ligament reconstructions were performed in male patients in April and May 2006 with double-bundle gracilis and semitendinosus tendon grafts using the 2.0 OrthoPilot navigation system. Group A (10 patients) underwent standard single-bundle anterior cruciate ligament reconstruction with doubled gracilis and semitendinosus tendon graft; group B (10 patients) underwent double-bundle reconstruction with doubled gracilis and semitendinosus tendon graft. Anteroposterior displacement and internal and external rotation at 30° of knee flexion were evaluated before and after reconstruction, using manual maximum force. Results Both techniques significantly reduced anteroposterior displacement and internal and external rotation of the tibia with respect to preoperative anterior cruciate ligament–deficient condition (P < .05). Comparing groups, no differences in anteroposterior tibial displacement and internal and external rotation of the tibia were found (anteroposterior, 3.7 mm and 5.2 mm; internal rotation, 16.3° and 16.6°; external rotation, 15.7° and 15.1°, respectively) in group A and B (P = .06, .90, and .72, respectively). Conclusion The hypothesis that addition of the posterolateral bundle to the anteromedial bundle is able to reduce internal rotation of the tibia at 30° of knee flexion is not confirmed. Clinical Relevance The effective role of the anatomical double-bundle procedure in better restoring knee kinematics should be questioned in an in vivo model.

Double-Bundle Anterior Cruciate Ligament Reconstruction: A Comprehensive Kinematic Study Using Navigation

Background Single-bundle anterior cruciate ligament reconstruction seems to be insufficient to control a combined rotatory load of internal and valgus torque, whereas anatomical double-bundle reconstruction might produce a better biomechanical outcome, especially during rotatory loads. Hypothesis The addition of the posterolateral bundle to the anteromedial bundle, in an in vivo double-bundle computer-assisted anterior cruciate ligament reconstruction, is able to reduce the internal rotation of the tibia at different degrees of flexion. Study Design Controlled laboratory study. Methods Ten consecutive anterior cruciate ligament reconstruction procedures were performed in male patients using double-bundle gracilis and semitendinosus tendon graft with the 2.0 OrthoPilot anterior cruciate ligament navigation system. Anteroposterior displacement at 30°, 60°, and 90° as well as internal and external rotation at 0°, 15°, 30°, 45°, 60°, and 90° of knee flexion were evaluated before reconstruction, after fixation of the anteromedial bundle, and then after fixation of the posterolateral bundle. Results Fixation of the anteromedial bundle significantly (P <. 05) reduced the anteroposterior displacement at 30°, 60°, and 90° of knee flexion; the internal rotation at 15°, 30°, 45°, and 60°; and the external rotation at 0°, 30°, 60°, and 90°. The addition of the posterolateral bundle to the anteromedial bundle did not significantly reduce internal and external rotation of the tibia at degrees of flexion measured (P >. 05). Conclusion The hypothesis that the addition of the posterolateral bundle to the anteromedial bundle is able to reduce internal rotation of the tibia, minimizing the pivot-shift phenomenon, was not confirmed. Clinical Relevance The effective role of the anatomical double-bundle procedure in better restoring knee kinematics and allowing better clinical outcomes should be questioned in an in vivo model of anterior cruciate ligament reconstruction using doubled semitendinosus and gracilis graft.

Extra-articular ACL reconstruction and pivot shift: In vivo dynamic evaluation with navigation

Background: The pivot-shift test is considered a reliable examination to evaluate the results of anterior cruciate ligament (ACL) reconstruction, as it strongly correlates with patient satisfaction, giving-way episodes, and activity level. The addition of lateral tenodesis (LT) to current techniques of intra-articular reconstruction with a hamstring graft could potentially improve knee laxity in cases of severe rotational instability. Purpose: To biomechanically investigate the effect of intra- and extra-articular ACL reconstructions on knee laxity and the pivot-shift phenomenon. Study Design: Controlled laboratory study. Methods: Twenty patients underwent anatomic single-bundle ACL reconstruction with doubled semitendinosus and gracilis tendons with the addition of extra-articular reconstruction. In patients in group A, intra-articular reconstruction was performed first and LT thereafter; in patients in group B, LT was performed first and intra-articular reconstruction thereafter. A navigator equipped with software designed for both static and dynamic evaluations was used to measure maximum anterior tibial translation (ATT) and axial tibial rotation (ATR) at 30° of flexion (static evaluation) and during the pivot-shift test (dynamic evaluation). Measurements were performed before reconstruction, after the first procedure, and after the second procedure. Results: For the static evaluation, in group A, the mean ATT significantly decreased from 14.1 ± 3.7 mm in the preoperative (ACL-deficient) condition to 6.0 ± 1.9 mm after ACL reconstruction and to 5.3 ± 1.6 mm after LT. The mean ATR at 30° of knee flexion significantly decreased from 35.7° ± 4.8° to 28.9° ± 4.1° and to 20.9° ± 4.8°, respectively. In group B, the mean ATT significantly decreased from 13.5 ± 6.5 mm in the preoperative (ACL-deficient) condition to 10.2 ± 3.2 mm after LT and to 4.0 ± 1.6 mm after ACL reconstruction. The mean ATR at 30° of knee flexion significantly decreased from 36.7° ± 4.8° to 26.2° ± 6.2° and to 23.5° ± 4.9°, respectively. For the dynamic evaluation (pivot-shift test), in group A, the mean ATT significantly decreased from 15.0 ± 6.8 mm in the preoperative (ACL-deficient) condition to 9.4 ± 6.4 mm after ACL reconstruction and to 8.5 ± 5.4 mm after LT. The mean ATR significantly decreased from 16.9° ± 4.7° to 11.6° ± 4.1° and to 6.1° ± 2.2°, respectively. In group B, the mean ATT significantly decreased from 12.5 ± 3.3 mm in the preoperative (ACL-deficient) condition to 9.1 ± 5.9 mm after LT and to 8.1 ± 5.4 mm after ACL reconstruction. The mean ATR significantly decreased from 16.0° ± 4.5° to 9.2° ± 4.3° and to 7.5° ± 4.0°, respectively. Conclusion/Clinical Relevance: Extra-articular reconstruction had little effect in reducing the anterior displacement of the tibia at 30° of flexion, but it was more effective than intra-articular reconstruction in reducing ATR. Anatomic ACL reconstruction and LT were synergic in controlling the pivot-shift phenomenon.

Learning curve in tissue sparing total hip replacement: comparison between different approaches

BackgroundThe tissue sparing surgery (TSS) concept means not only smaller incisions but also less tissue disruption, allowing decreased blood loss and improved function. However, TSS techniques can result in more complications related to the learning curve. The aim of this study was to compare the learning curve of an experienced surgeon with different TSS approaches for total hip replacement (THR) from a clinical and surgical point of view, focussing especially on complications related to the use of different geometric stems.Materials and methodsSixty patients scheduled to be operated for a primary THR were enrolled in the study and were randomly assigned to surgery by one of three different TSS approaches: lateral with mini incision (group A), minimally invasive anterior (group B) and minimally invasive antero-lateral (group C). Results from the three TSS groups were compared with a control group of 149 patients (group D).ResultsOur results reveal significantly reduced blood loss in the TSS groups compared with the control group, with no differences between the TSS groups. We found better early functional scores in the two minimally invasive groups (anterior and anterolateral), and a lower rate of complications with the antero-lateral TSS approach.ConclusionThe antero-lateral TSS approach seems to be safer and less demanding than standard THR surgery, and is suitable for use with different stems.

Effect of Cyclic Loading on New Polyblend Suture Coupled With Different Anchors

Background Secure tendon-to-bone fixation is essential for successful rotator cuff repair. Biomechanical properties of devices used in rotator cuff repair should be better understood. Purpose To evaluate the response to incremental cyclic loading of 6 different anchor-suture complexes commonly used in rotator cuff repair. Study Design Controlled laboratory study. Methods Two absorbable anchors 5 mm and 6.5 mm in diameter and 1 metallic anchor, coupled with Ethibond or FiberWire, were tested on 5 pairs of fresh-frozen human cadaveric shoulders. An incremental cyclic load was applied until failure using a Zwich-Roell Z010 electromechanical testing machine. The ultimate failure load and mode of failure were recorded. An analysis of variance model was used for statistical analysis. Results The FiberWire suture coupled with both absorbable and metallic anchors provided statistically significantly stronger fixation. However, although the metallic anchors in most cases failed because of slippage of the anchor, absorbable anchors failed because of rupture of the eyelet. Conclusions The FiberWire seems to increase the strength of fixation devices under cyclic load using both absorbable and metallic anchors, with relevant differences in failure mode (slippage of the metallic anchor and eyelet failure in the absorbable anchor). Clinical Relevance Use of the FiberWire suture might change the mode of failure of the suture-anchor complexes.

Biomechanical evaluation of different anterior cruciate ligament fixation techniques for hamstring graft

BackgroundA number of anterior cruciate ligament (ACL) fixation techniques are currently in use. Slippage or failure of the graft by excessive loading or aggressive rehabilitation may result in an unstable knee. Load and slippage of the ACL graft varies according to the fixation technique used.MethodsGraft slippage, load to failure, and stiffness were evaluated using an animal model. Six soft tissue ACL fixation techniques and bone cement as a fixation device were tested: group A, Endo Button CL-Bio RCI; group B, Swing Bridge-Evolgate; group C, Rigidfix-Intrafix; group D, Bone Mulch-Washer Lock; group E, Transfix-Retroscrew; group F, Transfix-Deltascrew; group G, Kryptonite bone cement. Maximum failure load, stiffness, and slippage at the 1st and 1000th cycles and mode of failure were evaluated.ResultsThe maximum failure load was significantly higher in group B (1030 N) and significantly lower in group E (483 N) than in the others. The stiffness of group B (270 N/mm) was significantly higher than the others. As for the mode of failure, group C showed failure in the femoral side in all tests (four device ruptures and two tendon ruptures on the femoral side). All failures of the other groups occurred on the tibial side except one test in group A. All failures in group G were due to slippage of the tendons.ConclusionLoad to failure and stiffness was significantly different between the ACL fixation techniques. All but one of the fixation techniques showed sufficient properties for adequate postoperative rehabilitation. Bone cement used as a fixation device in soft tissue grafts did not seem to provide adequate initial fixation suitable for early rehabilitation after ACL reconstruction.

Evolgate Fixation of Doubled Flexor Graft in Anterior Cruciate Ligament Reconstruction Biomechanical Evaluation With Cyclic Loading

Background The weakest points in hamstrings anterior cruciate ligament reconstruction are its points of fixation, especially on the tibial side. Methods for graft fixation to bone should be strong enough to avoid failure, stiff enough to restore load-displacement response, and secure enough to resist slippage under cyclic loading. Hypothesis Biomechanical properties of the interference screw can be improved by reinforcing the walls of the tunnel with a metal spiral (Evolgate fixation). Study Design Controlled laboratory study. Methods Three paired tests were performed using common digital extensor bovine tendons fixed to porcine tibias with interference screw, Intrafix, and Evolgate; critical graft fixation conditions were simulated by applying subsequent cycles to the graft before loading the graft until failure. Results The strength, stiffness, and resistance to slippage of the Evolgate were significantly higher than those of the interference screw; the ultimate failure load of the Evolgate was significantly higher than that of the Intrafix (1058 ± 130 N and 832 ± 156 N, respectively; P =. 02). No statistically significant differences were found between Evolgate and Intrafix regarding the stiffness and slippage under cyclic load. Conclusion Evolgate fixation seems to be stronger, stiffer, and more resistant to slippage than is interference screw fixation of similar length, and it is stronger but not stiffer than Intrafix. Clinical Relevance The Evolgate provides structural properties that seem to be appropriate for an intensive rehabilitation after anterior cruciate ligament reconstruction using a doubled semitendinosus and gracilis graft.

Navigated knee kinematics after tear of the ACL and its secondary restraints: preliminary results.

In this study we evaluated the role of the anterior cruciate ligament (ACL) and its secondary restraint in controlling knee stability using a navigation system. The purpose of this study was to evaluate the kinematics of the knee in different conditions of instability: ACL intact, after transection of the posterolateral (PL) bundle, after transection of the anteromedial (AM) bundle, and after lesion of the anterolateral femorotibial ligament (ALFTL). Anterior tibial translation and rotation were measured with a computer navigation system in 6 knees in whole fresh-frozen human cadavers by use of a manual maximum load. Anterior translation was evaluated at 30°, 60°, and 90° of flexion; rotation at 0°, 15°, 30°, 45°, 60°, and 90° of flexion. Cutting the PL bundle does not increase anterior translation and rotation of the knee. Cutting the AM bundle significantly increased the anteroposterior (AP) translation at 30° and 60° of flexion (P=.01), but does not increase rotation of the knee. Cutting the ALFTL increased anterior translation at 60° of flexion (P=.04) and rotation at 30°, 45°, and 60° of flexion (P=.03). The PL bundle does not affect anterior translation and rotation of the knee. The AM bundle is the primary restraint of the anterior translation but does not affect rotation of the knee. The lateral compartment becomes the primary restraint of rotation after ACL cut. The primary kinematic effect of an ACL injury is an increase in anterior tibial translation, but there is no significant change in maximum internal or external rotation. The lesion of the ALFTL increases tibial rotation and could be correlated to the pivot shift phenomenon.

Personality and psychopathological profiles in individuals exposed to mobbing

Increasingly, mental health and medical professionals have been asked to assess claims of psychological harm arising from harassment at the workplace, or “mobbing.” This study assessed the personality and psychopathological profiles of 146 individuals exposed to mobbing using validity, clinical, and content scales of the Minnesota Multiphasic Personality Inventory 2. Profiles and factor analyses were obtained. Two major dimensions emerged among those exposed to mobbing: (a) depressed mood, difficulty in making decisions, change-related anguish, and passive-aggressive traits (b) somatic symptoms, and need for attention and affection. This cross-sectional pilot study provides evidence that personality profiles of mobbing victims and psychological damage resulting from mobbing may be evaluated using standardized assessments, though a longitudinal study is needed to delineate cause-and-effect relationships.