Eduard Brynda

Novel spectral fiber optic sensor based on surface plasmon resonance

Abstract A novel fiber optic surface plasmon resonance (SPR) sensing device based on spectral interrogation of SPR in a miniature fiber optic sensing element using depolarized light is reported. Optimization analysis of the sensor based on the equivalent planar waveguide approach and the mode expansion and propagation method is presented. A laboratory prototype of the sensor has been proved to be able to measure refractive index variations as small as 5×10−7. Suitability of the sensor for biosensing has been demonstrated by detecting IgG via respective monoclonal antibodies immobilized on the SPR sensor surface.

Interaction of blood plasma with antifouling surfaces.

Nonspecific adsorption of proteins is a crucial problem in the detection of analytes in complex biological media by affinity sensors operating with label-free detection. We modified the gold surface of surface plasmon resonance (SPR) sensors with three types of promising antifouling coatings: self-assembled monolayers (SAM)s of alkanethiolates terminated with diethylene glycol and carboxylic groups, poly(ethylene glycol) (PEG) grafted onto the SAMs, and zwitterionic polymer brushes of poly(carboxybetaine methacrylate), poly(sulfobetaine methacrylate), and poly(phosphorylcholine methacrylate). Using SPR, we compared the efficacy of the coatings to reduce nonspecific adsorption from human blood plasma and from single-protein solutions of human serum albumin, immunoglobulin G, fibrinogen, and lysozyme. There was no direct relationship between values of water contact angles and plasma deposition on the coated surfaces. A rather high plasma deposition on SAMs was decreased by grafting PEG chains. Fouling on PEG was observed only from plasma fractions containing proteins with molecular mass higher than 350 000 Da. The adsorption kinetics from plasma collected from different healthy donors differed. Poly(carboxybetaine methacrylate) completely prevented the deposition from plasma, but the other more hydrophilic zwitterionic polymers prevented single-protein adsorption but did not prevent plasma deposition. The results suggest that neither wettability nor adsorption of the main plasma proteins was the main indicator of deposition from blood plasma.

A miniature fiber optic surface plasmon resonance sensor for fast detection of Staphylococcal enterotoxin B.

A fiber optic surface plasmon resonance (SPR) biosensor for detection of Staphylococcal enterotoxin B (SEB) is reported. The sensor is based on spectral interrogation of surface plasmons in a miniature sensing element based on a side-polished single-mode optical fiber with a thin metal overlayer. For specific detection of SEB, the SPR sensor is functionalized with a covalently crosslinked double-layer of antibodies against SEB. The SPR biosensor is demonstrated to be able to detect ng/ml concentrations of SEB in less than 10 min.

Polymer Brushes Showing Non-Fouling in Blood Plasma Challenge the Currently Accepted Design of Protein Resistant Surfaces

Ultra-low-fouling poly[N-(2-hydroxypropyl) methacrylamide] (poly(HPMA)) brushes have been synthesized for the first time. Similar to the so far only ultra-low-fouling surface, poly(carboxybetaine acrylamide), the level of blood plasma fouling was below the detection limit of surface plasmon resonance (SPR, 0.03 ng·cm(-2)) despite being a hydrogen bond donor and displaying a moderate wettability, thus challenging the currently accepted views for the design of antifouling properties. The antifouling properties were preserved even after two years of storage. To demonstrate the potential of poly(HPMA) brushes for the preparation of bioactive ultra-low fouling surfaces a label-free SPR immunosensor for detection of G Streptococcus was prepared.

Complete identification of proteins responsible for human blood plasma fouling on poly(ethylene glycol)-based surfaces.

The resistance of poly(ethylene glycol) (PEG) against protein adsorption is crucial and has been widely utilized in various biomedical applications. In this work, the complete protein composition of biofilms deposited on PEG-based surfaces from human blood plasma (BP) was identified for the first time using nanoLC-MS/MS, a powerful tool in protein analysis. The mass of deposited BP and the number of different proteins contained in the deposits on individual surfaces decreased in the order of self-assembling monolayers of oligo(ethylene glycol) alkanethiolates (SAM) > poly(ethylene glycol) end-grafted onto a SAM > poly(oligo(ethylene glycol) methacrylate) brushes prepared by surface initiated polymerization (poly(OEGMA)). The BP deposit on the poly(OEGMA) surface was composed only of apolipoprotein A-I, apolipoprotein B-100, complement C3, complement C4-A, complement C4-B, histidine-rich glycoprotein, Ig mu chain C region, fibrinogen (Fbg), and serum albumin (HSA). The total resistance of the surface to the Fbg and HSA adsorption from single protein solutions suggested that their deposition from BP was mediated by some of the other proteins. Current theories of protein resistance are not sufficient to explain the observed plasma fouling. The research focused on the identified proteins, and the experimental approach used in this work can provide the basis for the understanding and rational design of plasma-resistant surfaces.

Photo‐Patterning of Non‐Fouling Polymers and Biomolecules on Paper

Functional cellulose substrates with tetrazole moieties are generated to serve as universal platforms for the spatio-temporal immobilization of synthetic ultra-low fouling polymer brushes and protein species via a nitrile imine-mediated tetrazole-ene cycloaddition (NITEC)-based protocol. Poly(carboxybetaine acrylamide) brushes are grafted from initiators photo-patterned by NITEC utilizing single electron transfer living radical polymerization. Streptavidin is photo-immobilized with remarkable efficiency, opening the possibility to generate new materials for biomedical and biosensing applications.

Substrate-Independent Approach for the Generation of Functional Protein Resistant Surfaces

A new route for coating various substrates with antifouling polymer layers was developed. It consisted in deposition of an amino-rich adhesion layer by means of RF magnetron sputtering of Nylon 6,6 followed by the well-controlled, surface-initiated atom transfer radical polymerization of antifouling polymer brushes initiated by bromoisobutyrate covalently attached to amino groups present in the adhesion layer. Polymer brushes of hydroxy- and methoxy-capped oligoethyleneglycol methacrylate and carboxybetaine acrylamide were grafted from bromoisobutyrate initiator attached to a 15 nm thick amino-rich adhesion layer deposited on gold, silicon, polypropylene, and titanium-aluminum-vanadium alloy surfaces. Well-controlled polymerization kinetics made it possible to control the thickness of the brushes at a nanometer scale. Zero fouling from single protein solutions and a reduction of more than 90% in the fouling from blood plasma observed on the uncoated surfaces was achieved. The feasibility of functionalization with bioactive compounds was tested by covalent attachment of streptavidin onto poly(oligoethylene glycol methacrylate) brush and subsequent immobilization of model antibodies and oligonucleotides. The procedure is nondestructive and does not require any chemical preactivation or the presence of reactive groups on the substrate surface. Contrary to current antifouling modifications, the developed coating can be built on various classes of substrates and preserves its antifouling properties even in undiluted blood plasma. The new technique might be used for fabrication of biotechnological and biomedical devices with tailor-made functions that will not be impaired by fouling from ambient biological media.

Poly(HEMA) brushes emerging as a new platform for direct detection of food pathogen in milk samples

Surface plasmon resonance (SPR) biosensors capable of in real time detection of Cronobacter at concentrations down to 10⁶ cells mL⁻¹ in samples of consumer fresh-whole fat milk, powder whole-fat milk preparation, and powder infant formulation were developed for the first time. Antibodies against Cronobacter were covalently attached onto polymer brushes of poly(2-hydroxyethyl methacrylate) (poly(HEMA)) grafted from the SPR chip surface. The lowest detection limit, 10⁴ cells mL⁻¹, was achieved in phosphate buffered saline (pH 7.4) with sensors prepared by covalent immobilization of the same antibodies onto a self assembled monolayer (SAM) of hexa(ethylene glycol) undecanethiol (EG₆). However, when the EG₆ based sensors were challenged with milk samples the non-specific response due to the deposition of non-targeted compounds from the milk samples was much higher than the specific response to Cronobacter hampering the detection in milk. Similar interfering fouling was observed on antifouling polymer brushes of hydroxy-capped oligoethylene glycol methacrylate and even a 10 times higher fouling was observed on the widely used SAM of mixed hydroxy- and carboxy-terminated alkanethiols. Only poly(HEMA) brushes totally suppressed the fouling from milk samples. The robust well-controlled surface initiated atom transfer radical polymerization of HEMA allowed the preparation of highly dense brushes with a minimal thickness so that the capture of antigens by the antibodies immobilized on the brush layer could take place close to the gold SPR surface to provide a stronger optical response while the fouling was still suppressed. A minimum thickness of 19 nm of poly(HEMA) brush layer was necessary to suppress completely non-specific sensor response to fouling from milk.

Surfaces resistant to fouling from biological fluids: towards bioactive surfaces for real applications.

The fouling from four human body fluids - blood plasma, cerebrospinal fluid, urine and saliva - and four animal fluids - foetal bovine and calf sera, egg and milk - relevant to human and veterinary medicine, immunology, biology and diagnostics is assessed on antifouling SAMs and on polymer brushes of oligo(ethylene glycol) methacrylate, 2-hydroxyethyl methacrylate, carboxybetaine acrylamide and N-(2-hydroxypropyl)methacrylamide synthesized via ATRP. While important deposits from the all biofluids are observed on SAMs, a superior resistance is achieved on polymer brushes. Importantly, only poly(CBAA) and poly(HPMA) are capable of resisting the fouling from the most challenging media, blood plasma and eggs.

Albumin and heparin multilayer coatings for blood-contacting medical devices.

Three types of covalently crosslinked assemblies consisting of multiple (1) molecular layers of human serum albumin (HSA); (2) alternating layers of HSA and unfractionated heparin; and (3) alternating layers of HSA and partly depolymerized heparin fixed with one end to HSA were prepared on various surfaces. Adsorption of fibrinogen, IgG, and antithrombin (ATIII) from human citrated plasma on coated surfaces was evaluated by ELISA. Fibrinogen adsorption on coated ELISA plates was lower than that on bare polystyrene. There was no IgG adsorption on the HSA coating alone, but considerably high IgG adsorption was detected on the heparin-containing surface. The adsorption of ATIII increased with increasing heparin on the surface. The effect of multilayer coatings on platelets was tested by incubation of modified vascular prostheses with citrated blood. The most favorable interaction with platelets was observed on the HSA assembly. The interaction of platelets with the surface bearing unfractionated heparin was higher than that of the surface covered with partly depolymerized heparin. The long-term durability of the HSA-heparin coating was proven by a 21-day implantation of coated polyurethane plates in goat heart.