Eduardo Carballeira

Acute effects of distribution of rest between repetitions

The purpose of this study was to compare acute mechanical and metabolic effects of 2 sessions of resistance training equated by volume and total resting time but with different set configuration: sets to failure (FS) vs. distribution of rest between each repetition (NFS). 10 male judoists completed a session consisting of 3 sets to failure of parallel back squat with 4 repetitions at maximum load, and a rest of 3 min between the sets. At least 72 h later subjects developed the same volume, but total resting time was distributed among individual repetitions. Before and after sessions isometric force and mean propulsive velocity with load corresponding to maximum propulsive power were assessed. Results showed that in respect to FS, NFS showed an 18.94% (± 17.98) higher average mean propulsive velocity during session (0.42 ± 0.04 vs. 0.35 ± 0.08 m.s - 1; p=0.009), lower blood lactate concentration after session (maximum average value 1.52 ± 0.77 vs. 3.95 ± 1.82; session effect: p=0.001) and higher mean propulsive velocity with load corresponding to maximum propulsive power (mean propulsive velocity immediately after session 0.64 ± 0.09 vs. 0.59 ± 0.12 m.s - 1; session effect: p=0.019). These data show that distribution of rest in sessions equated for volume and total resting time determines differences in performance during sessions and mechanical or metabolic acute effects.

Analysis of factors that influence the maximum number of repetitions in two upper-body resistance exercises: curl biceps and bench press.

Iglesias, E, Boullosa, DA, Dopico, X, and Carballeira, E. Análisis of factors that influence the maximum number of repetitions in two upper-body resistance exercises: curl biceps and bench press. J Strength Cond Res 24(6): 1566-1572, 2010-The purpose of this study was to analyze the influence of exercise type, set configuration, and relative intensity load on relationship between 1 repetition maximum (1RM) and maximum number of repetitions (MNR). Thirteen male subjects, experienced in resistance training, were tested in bench press and biceps curl for 1RM, MNR at 90% of 1RM with cluster set configuration (rest of 30s between repetitions) and MNR at 70% of 1RM with traditional set configuration (no rest between repetitions). A lineal encoder was used for measuring displacement of load. Analysis of variance analysis revealed a significant effect of load (p < 0.01) and a tendency in exercise factor (p = 0.096), whereas the interaction effect was not significant. MNR at 70% of 1RM was lower for biceps curl (16.31 ± 2.59 vs. 8.77 ± 3 in bench press and biceps curl, respectively; p < 0.05) and at 90% of 1RM (21.85 ± 11.06 vs. 18.54 ± 12.84 in bench press and biceps curl, respectively; p > 0.05). Correlation between 1RM and MNR was significant for medium-intensity in biceps curl (r = −0.574; p < 0.05) and between MNR and 1RM/body mass (r = −0.574; p < 0.05). Neither 1RM nor 1RM/body mass correlated with velocity along set, so velocity seems to be similar at a same relative intensity for subjects with differences in maximum strength levels. From our results, we suggest the employment of MNR rather than % of 1RM for training monitoring. Furthermore, we suggest the introduction of cluster set configuration for upper-body assessment of MNR and for upper-body muscular endurance training at high-intensity loads, as it seems an efficient approach in looking for sessions with greater training volumes. This could be an interesting approach for such sports as wrestling or weightlifting.

Effect of set configuration on hemodynamics and cardiac autonomic modulation after high‐intensity squat exercise

The aim of this study was to compare the effect of two different high‐intensity resistance exercise (RE) set configurations on the following: systolic blood pressure (SBP), rate pressure product (RPP), heart rate (HR) variability (HRV), and HR complexity (HRC). Ten well‐trained males performed three parallel squat sets until failure (traditional training; TT) with the four repetitions maximum load (4RM), and a rest of 3 min between sets. Thereafter, participants performed a cluster training session (CT) of equated load but with resting time distributed between each repetition. Dependent variables were recorded before, during, and after RE. Mean SBP (25·7 versus 10·9% percentage increase; P = 0·016) and RPP (112·5 versus 69·9%; P = 0·01) were significantly higher in TT. The decrease in HRV after exercise and the drop of HRC during exercise were similar in CT and TT. Change of standard deviation of normal RR intervals after TT correlated with change in SBP (r = 0·803; P = 0·009) while the change of Sample Entropy during exercise correlated with the increment of RPP during CT (ρ = −0·667; P = 0·05). This study suggests that set configuration influences acute cardiovascular responses during RE. When intensity, volume and work‐to‐rest ratio are equated, CT is less demanding in terms of SBP and RPP. A greater hemodynamic response during exercise would be associated with a faster parasympathetic recovery.

Effect of intensity and duration of conditioning protocol on post-activation potentiation and changes in H-reflex

Abstract The force enhancement of muscle twitch contraction after a maximal voluntary contraction (MVC) has been defined as post-activation potentiation. However, the effects of post-activation potentiation on ballistic movements have not been studied extensively, or the underlying neurophysiologycal mechanism. In the current study, we examined post-activation potentiation and spinal H-reflex excitability in the soleus muscle. Mechanical power during explosive ballistic plantar flexions was measured in 14 males before and after 5 s, 4 min, and 10 min of isometric conditioning (EPFpre, EPF5s, EPF4min, EPF10min, respectively). Four sessions corresponding to four different protocols of isometric conditioning were conducted. The protocols were different in the intensity (10% vs. 100% of MVC) and duration (7 vs. 10 s) of the isometric conditioning. The results showed a significant enhancement in mechanical power in EPF4min compared with EPFpre, only when the isometric conditioning was performed at 100% of MVC for 10 s. No significant changes were observed in the H-related parameters (e.g amplitude, threshold, H/M ratio) after the isometric conditioning. Our results show that to obtain a post-activation potentiation during explosive ballistic movements, the intensity and duration of the isometric conditioning must be controlled. Moreover, the improvement in mechanical power is not related to spinal H-reflex excitability.

Performance of maximum number of repetitions with cluster-set configuration.

PURPOSE To analyze performance during the execution of a maximum number of repetitions (MNR) in a cluster-set configuration. METHOD Nine judokas performed 2 sessions of parallel squats with a load corresponding to 4-repetition maximum (4RM) with a traditional-training (TT) and cluster-training (CT) set configuration. The TT consisted of 3 sets of repetitions leading to failure and 3 min of rest between sets. In the CT the MNR was performed with a rest interval between repetitions (45.44 ± 11.89 s). The work-to-rest ratio was similar for CT and TT. RESULTS MNR in CT was 45.5 ± 32 repetitions and was 9.33 ± 1.87 times the volume in TT. There was a tendency for the average mean propulsive velocity (MPV) to be higher in CT (0.39 ± 0.04 vs 0.36 ± 0.04 m/s for CT and TT, respectively, P = .054, standardized mean difference [d] = 0.57). The average MPV was higher in CT for a similar number of repetitions (0.44 ± 0.08 vs 0.36 ± 0.04 m/s for CT and TT, respectively, P = .006, d = 1.33). The number of repetitions in TT was correlated with absolute 4RM load (r = -.719, P = .031) but not in CT (r = -.273, P = .477). CONCLUSIONS A cluster-set configuration allows for a higher number of repetitions and improved sustainability of mechanical performance. CT, unlike TT, was not affected by absolute load, suggesting an improvement of training volume with high absolute loads.

Inter-repetition rest training and traditional set configuration produce similar strength gains without cortical adaptations.

ABSTRACT This study compared the functional and neural effects of two strength training programmes differing in set configuration. Thirteen participants performed 10 sessions, over a period of 5 weeks, of unilateral leg extensions with different set configurations but with identical work-to-rest ratios for each limb: a traditional configuration (4 sets of 8 repetitions, 10RM load, 3-min pause between sets) and an inter-repetition rest configuration (32 repetitions, 10RM load, 17.4 s of rest between each repetition). Mean propulsive velocity of the traditional sessions was lower than for inter-repetition rest sessions (0.48 ± 0.06 vs. 0.54 ± 0.06 m · s−1; P < 0.001), while perceived exertion was higher (8.3 ± 0.9 and 6.56 ± 1.6 for traditional training and IRT; P = 0.002). One repetition maximum (RM), work with 10RM load, maximum mean propulsive power, maximum voluntary contraction and time to failure with 50% of maximum isometric force improved similarly in both legs (time effect, P < 0.001; effect size range, 0.451–1.190). Time and set configuration did not show significant main effects or interactions for cortical adaptations (motor-evoked potentials, short-interval intracortical inhibition, intracortical facilitation). There were no significant correlations between changes in cortical and peripheral neural adaptations and strength improvement. In conclusion, inter-repetition rest configuration was as effective as traditional training in improving muscle performance.

Effects of bilateral and non-dominant practices on the lateral preference in judo matches

ABSTRACT This study analysed the effects of bilateral and non-dominant practice on novice practitioners’ lateral preference for judo skills in a combat context (i.e., randori). Thirty sports sciences students (22 men and 8 women; mean age 19 ± 1 years) with right hand, foot, and counterclockwise rotation preferences were divided into 3 groups: bilateral (BG; n = 8), non-dominant (NDG; n = 11), and control (CG; n = 11). Participants received 8 weeks of training at a rate of 3 days per week. The NDG was trained to perform judo skills exclusive with their non-dominant side, while the BG performed every task symmetrically. Before and after training, participants were recorded during two 3-min randoris to obtain the percentage of their engagement in dominant side actions. Pretest percentages were 73.1 ± 19.9%, 77.8 ± 18.8%, and 68.9 ± 27.2% for BG, NDG, and CG, respectively. Post-test values were 75.0 ± 15.6%, 23.3 ± 27.9%, and 72.2.9 ± 20.4%, respectively. Significant differences were observed between NDG and each of the other groups after the training. Changes from pretest were only significant for NDG (P = 0.003). These results suggest that lateral preference among novice judo practitioners during randori can be modulated by the type of practice.

Changes in the Force-Velocity Mechanical Profile After Short Resistance Training Programs Differing in Set Configurations

The main aim of this study was to analyze the effect of resistance training programs differing in set configuration on mechanical force-velocity profiles. Thirteen participants performed 10 unilateral knee extension training sessions over 5 weeks. Each limb was randomized to one of the following set configurations: traditional (4 sets of 8 repetitions at maximum intended velocity, 10RM load, 3-min pause between sets) or interrepetition rest (32 maximum intended velocity repetitions, 10RM load, 17.4 s of rest between each repetition). Velocity of each repetition was recorded throughout the program. Before and after training, individual linear force velocities were calculated, and the following parameters were obtained: force and velocity axis intercept, slope, and estimated maximum power. Mean velocity was higher throughout the program for interrepetition rest configuration (0.54 ± 0.01 vs. 0.48 ± 0.01 m∙s-1 for interrepetition rest, and traditional configuration respectively; main effect of set configuration: P < .001). There was a significant increase in force and velocity intercepts, but a steeper negative slope after both training protocols (main effect of time: P < .001 for every variable). Differences in resistance training velocity did not affect the adaptations. Our results suggest that, in a short-term program, maximum intended rather than actual velocity is a key factor to modulate strength adaptations.