Eduardo Quiñones

Hardware support for WCET analysis of hard real-time multicore systems

The increasing demand for new functionalities in current and future hard real-time embedded systems like automotive, avionics and space industries is driving an increase in the performance required in embedded processors. Multicore processors represent a good design solution for such systems due to their high performance, low cost and power consumption characteristics. However, hard real-time embedded systems require time analyzability and current multicore processors are less analyzable than single-core processors due to the interferences between different tasks when accessing shared hardware resources. In this paper we propose a multicore architecture with shared resources that allows the execution of applications with hard real-time and non hard real-time constraints at the same time, providing time analizability for the hard real-time tasks so that they can meet their deadlines. Moreover our architecture proposal provides high-performance for the non hard real-time tasks.

Measurement-Based Probabilistic Timing Analysis for Multi-path Programs

The rigorous application of static timing analysis requires a large and costly amount of detail knowledge on the hardware and software components of the system. Probabilistic Timing Analysis has potential for reducing the weight of that demand. In this paper, we present a sound measurement-based probabilistic timing analysis technique based on Extreme Value Theory. In all the experiments made as part of this work, the timing bounds determined by our technique were less than 15% pessimistic in comparison with the tightest possible bounds obtainable with any probabilistic timing analysis technique. As a point of interest to industrial users, our technique also requires a comparatively low number of measurement runs of the program under analysis, less than 650 runs were needed for the benchmarks presented in this paper.

An Analyzable Memory Controller for Hard Real-Time CMPs

Multicore processors (CMPs) represent a good solution to provide the performance required by current and future hard real-time systems. However, it is difficult to compute a tight WCET estimation for CMPs due to interferences that tasks suffer when accessing shared hardware resources. We propose an analyzable JEDEC-compliant DDRx SDRAM memory controller (AMC) for hard real-time CMPs, that reduces the impact of memory interferences caused by other tasks on WCET estimation, providing a predictable memory access time and allowing the computation of tight WCET estimations.

Merasa: Multicore Execution of Hard Real-Time Applications Supporting Analyzability

The Merasa project aims to achieve a breakthrough in hardware design, hard real-time support in system software, and worst-case execution time analysis tools for embedded multicore processors. The project focuses on developing multicore processor designs for hard real-time embedded systems and techniques to guarantee the analyzability and timing predictability of every feature provided by the processor.

PROARTIS: Probabilistically Analyzable Real-Time Systems

Static timing analysis is the state-of-the-art practice of ascertaining the timing behavior of current-generation real-time embedded systems. The adoption of more complex hardware to respond to the increasing demand for computing power in next-generation systems exacerbates some of the limitations of static timing analysis. In particular, the effort of acquiring (1) detailed information on the hardware to develop an accurate model of its execution latency as well as (2) knowledge of the timing behavior of the program in the presence of varying hardware conditions, such as those dependent on the history of previously executed instructions. We call these problems the timing analysis walls. In this vision-statement article, we present probabilistic timing analysis, a novel approach to the analysis of the timing behavior of next-generation real-time embedded systems. We show how probabilistic timing analysis attacks the timing analysis walls; we then illustrate the mathematical foundations on which this method is based and the challenges we face in the effort of efficiently implementing it. We also present experimental evidence that shows how probabilistic timing analysis reduces the extent of knowledge about the execution platform required to produce probabilistically accurate WCET estimations.

A cache design for probabilistically analysable real-time systems

Caches provide significant performance improvements, though their use in real-time industry is low because current WCET analysis tools require detailed knowledge of programs cache accesses to provide tight WCET estimates. Probabilistic Timing Analysis (PTA) has emerged as a solution to reduce the amount of information needed to provide tight WCET estimates, although it imposes new requirements on hardware design. At cache level, so far only fully-associative random-replacement caches have been proven to fulfill the needs of PTA, but they are expensive in size and energy. In this paper we propose a cache design that allows set-associative and direct-mapped caches to be analysed with PTA techniques. In particular we propose a novel parametric random placement suitable for PTA that is proven to have low hardware complexity and energy consumption while providing comparable performance to that of conventional modulo placement.

Measurement-based probabilistic timing analysis: Lessons from an integrated-modular avionics case study

Probabilistic Timing Analysis (PTA) in general and its measurement-based variant called MBPTA in particular can mitigate some of the problems that impair current worst-case execution time (WCET) analysis techniques. MBPTA computes tight WCET bounds expressed as probabilistic exceedance functions, without needing much information on the hardware and software internals of the system. Classic WCET analysis has information needs that may be costly and difficult to satisfy, and their omission increases pessimism. Previous work has shown that MBPTA does well with benchmark programs. Real-world applications however place more demanding requirements on timing analysis than simple benchmarks. It is interesting to see how PTA responds to them. This paper discusses the application of MBPTA to a real avionics system and presents lessons learned in that process.

On the evaluation of the impact of shared resources in multithreaded COTS processors in time-critical environments

Commercial Off-The-Shelf (COTS) processors are now commonly used in real-time embedded systems. The characteristics of these processors fulfill system requirements in terms of time-to-market, low cost, and high performance-per-watt ratio. However, multithreaded (MT) processors are still not widely used in real-time systems because the timing analysis is too complex. In MT processors, simultaneously-running tasks share and compete for processor resources, so the timing analysis has to estimate the possible impact that the inter-task interferences have on the execution time of the applications. In this paper, we propose a method that quantifies the slowdown that simultaneously-running tasks may experience due to collision in shared processor resources. To that end, we designed benchmarks that stress specific processor resources and we used them to (1) estimate the upper limit of a slowdown that simultaneously-running tasks may experience because of collision in different shared processor resources, and (2) quantify the sensitivity of time-critical applications to collision in these resources. We used the presented method to determine if a given MT processor is a good candidate for systems with timing requirements. We also present a case study in which the method is used to analyze three multithreaded architectures exhibiting different configurations of resource sharing. Finally, we show that measuring the slowdown that real applications experience when simultaneously-running with resource-stressing benchmarks is an important step in measurement-based timing analysis. This information is a base for incremental verification of MT COTS architectures.

parMERASA -- Multi-core Execution of Parallelised Hard Real-Time Applications Supporting Analysability

Engineers who design hard real-time embedded systems express a need for several times the performance available today while keeping safety as major criterion. A breakthrough in performance is expected by parallelizing hard real-time applications and running them on an embedded multi-core processor, which enables combining the requirements for high-performance with timing-predictable execution. parMERASA will provide a timing analyzable system of parallel hard real-time applications running on a scalable multicore processor. parMERASA goes one step beyond mixed criticality demands: It targets future complex control algorithms by parallelizing hard real-time programs to run on predictable multi-/many-core processors. We aim to achieve a breakthrough in techniques for parallelization of industrial hard real-time programs, provide hard real-time support in system software, WCET analysis and verification tools for multi-cores, and techniques for predictable multi-core designs with up to 64 cores.

Timing effects of DDR memory systems in hard real-time multicore architectures: Issues and solutions

Multicore processors are an effective solution to cope with the performance requirements of real-time embedded systems due to their good performance-per-watt ratio and high performance capabilities. Unfortunately, their use in integrated architectures such as IMA or AUTOSAR is limited by the fact that multicores do not guarantee a time composable behavior for the applications: the WCET of a task depends on inter-task interferences introduced by other tasks running simultaneously. This article focuses on the off-chip memory system: the hardware shared resource with the highest impact on the WCET and hence the main impediment for the use of multicores in integrated architectures. We present an analytical model that computes the worst-case delay, also known as Upper Bound Delay (UBD), that a memory request can suffer due to memory interferences generated by other co-running tasks. By considering the UBD in the WCET analysis, the resulting WCET estimation is independent from the other tasks, hence ensuring the time composability property and enabling the use of multicores in integrated architectures. We propose a memory controller for hard real-time multicores compliant with the analytical model that implements extra hardware features to deal with refresh operations and interferences generated by co-running non hard real-time tasks.