Eiichiro Ariji

Three-dimensional computed tomographic evaluation of morphologic airway changes after mandibular setback osteotomy for prognathism.

OBJECTIVE To observe changes in the pharyngeal airway and the hyoid bone position after mandibular setback osteotomy in 30 patients with mandibular prognathism by means of 3-dimensional computed tomography (3DCT). STUDY DESIGN Preoperative and postoperative computed tomography (CT) examinations were performed on 17 patients treated by sagittal split ramus osteotomy with rigid osteosynthesis and on 13 patients treated by intraoral vertical ramus osteotomy without osteosynthesis. The amount of mandibular setback was measured by the preoperative to postoperative difference of the mandibular position in axial CT images. The sizes of the preoperative and postoperative pharyngeal airway were evaluated from semitransparent and crosscut 3DCT images. Postoperative displacement of the hyoid bone was evaluated by a technique to superimpose a postoperative hard tissue 3DCT image on the preoperative image. The helical scan technique was used in the CT examination. The volume rendering technique was used to create 3DCT images. RESULTS The mean mandibular setback was 7.8 +/- 2.1 mm with a range of 5 to 11 mm. Three months after surgery, the lateral and frontal widths of the pharyngeal airway had decreased significantly in comparison with the preoperative width. The mean reduction rates of the lateral and frontal width were 23.6% and 11.4%, respectively. The diminished airway did not recover by either 6 months or 1 year after surgery in most cases. Downward and posterior displacement of the hyoid bone was seen postoperatively. There were positive correlations between the amount of mandibular setback and reduction of the lateral width of the pharyngeal airway (r = 0.54) and the amount of hyoid bone displacement (r = 0.42). There were no significant differences between the two surgical techniques. CONCLUSION Three-dimensional computed tomography was a practical imaging technique to evaluate the morphologic airway changes. The pharyngeal airway may have irreversible narrowing after mandibular setback surgery.

Relationship between density variability and imaging volume size in cone-beam computerized tomographic scanning of the maxillofacial region: an in vitro study

OBJECTIVE In limited-volume cone-beam computerized tomography (CBCT) imaging, projection data discontinuity caused by maxillofacial hard tissue structures outside the reconstructed volume are reported to affect the density value of the hard and soft tissue structures within the volume. The intensity of this effect is purported to be related to the size of the imaging volume. The aim of this study was to characterize the effect of the size of the scanned volume on density values in vitro. STUDY DESIGN Test objects were positioned in a custom phantom in the following 4 patterns: bimandible and vertebrae, bimandible, left mandible and vertebrae, and left mandible. We used a newly developed flat panel detector CBCT system (Alphard Vega; Asahi Roentgen, Kyoto, Japan) to acquire scans of the left molar region using cylindrical volumes of approximately 5, 10, 15, and 20 cm in diameter and height. The density values of the mandible and the adjacent soft tissue regions were analyzed. RESULTS Highest density variability was observed in the smallest-volume (5 cm) scans. Density variability increased when more objects were included outside the area being imaged. Fewer effects were noted in CBCT scans of larger (10, 15, and 20 cm) volumes. CONCLUSION Larger-volume CBCT scans may yield more consistent density values. Smaller CBCT volumes have the advantages of better image resolution and lower radiation doses. The optimization of the image characteristics is maximized by careful consideration of the purpose of the CBCT examination.

Accessory mental foramen assessment using cone-beam computed tomography.

OBJECTIVE The purpose of the present study was to assess the accessory mental foramen using cone-beam computed tomography (CBCT) images. STUDY DESIGN A total of 157 patients were enrolled in this investigation. The mental and accessory mental foramina, which show continuity with the mandibular canal, were assessed using axial and cross-sectional, 2-dimensional CBCT images. The sizes of the mental and accessory mental foramina were measured and statistically analyzed. Also, the distance between the mental and accessory mental foramina was measured. RESULTS The accessory mental foramen was observed in 7% of patients. There was no significant difference regarding the sizes of the mental foramen between accessory mental foramen presence and absence. Also, the mean distance between the mental and accessory mental foramina was 6.3 mm (SD: 1.5 mm). CONCLUSION The accessory mental foramen, which shows continuity with the mandibular canal, could be observed in 7% of the subjects using CBCT.

Clinical evaluations of coronectomy (intentional partial odontectomy) for mandibular third molars using dental computed tomography: a case-control study.

PURPOSE Studies have suggested that coronectomy reduces the risk of inferior alveolar nerve injury (IANI) when a close relationship with the inferior alveolar canal is indicated on panoramic imaging. However, the relationship between the inferior alveolar canal and the root are unclear on panoramic imaging. Our aim was to compare coronectomy with traditional extraction for the treatment of mandibular third molars that had clear high IANI risks as evaluated by dental computed tomography. PATIENTS AND METHODS We designed a case-control study of subjects with high-risk signs of IANI on panoramic images evaluated by dental computed tomography before enrollment. The 220 patients enrolled were assigned to extraction (control group, n = 118) or coronectomy (case group, n = 102). RESULTS The mean follow-up time was 13 months in the extraction group and 13.5 months in the coronectomy group. Six IANIs (5%) were found in the extraction group. In the coronectomy group, 1 patient (1%) had symptoms of neurapraxia, which disappeared within 1 month. Four remaining roots had signs of postoperative infection, and the patients underwent extraction of the root. No nerve damage resulted in these patients after repeat extraction. CONCLUSIONS Coronectomy might reduce the risk of nerve injury for patients at true high risk of IANI as evaluated by dental computed tomography. A long-term postoperative review is needed to assess the incidence of root migration and the root extraction and infection rates after coronectomy.

Comparison between cone-beam and multislice computed tomography depicting mandibular neurovascular canal structures.

OBJECTIVE The most common diagnostic imaging modalities for cross-sectional imaging in dental implant planning are currently cone-beam computed tomography (CBCT) and multislice CT (MSCT). However, clinical differences between CBCT and MSCT in this task have not been fully clarified. In this investigation, the detection of fine anatomical structures in the mandible was assessed and compared between CBCT and MSCT images. STUDY DESIGN The sample consisted of 28 patients who had undergone CBCT and MSCT. The bifid mandibular canal in the mandibular ramus, accessory mental and buccal foramina, and median and lateral lingual bony canals were observed in 2-D images, and the findings were compared between CBCT and MSCT. RESULTS Four of 19 canals observed in CBCT were not observed in MSCT images. Three accessory mental foramina in 2 patients and 28 lateral lingual bony canals in 18 patients were observed consistently using the two methods. CONCLUSION Depiction of fine anatomic features in the mandible associated with neurovascular structures is consistent between CBCT and MSCT images.

Evaluation of voxel values in mandibular cancellous bone: relationship between cone‐beam computed tomography and multislice helical computed tomography

OBJECTIVE Measurements of bone density in designed sites are important in presurgical imaging for dental implant treatment. However, the pixel or voxel values obtained from cone-beam computed tomography (CT) images are not absolute values. Hence, the relationship between voxel values obtained from cone-beam CT with a limited-volume exposure field and a flat panel detector and bone mineral densities (BMDs) obtained from multislice CT was evaluated in the mandible. MATERIAL AND METHODS A total of 16 (four males and 12 females) patients who had undergone imaging for mandibular dental implant treatment using cone-beam CT with Alphard VEGA and multislice CT were enrolled in this investigation. Cross-sectional images of cone-beam and multislice CT were reconstructed, and values of regions of interest (ROIs) in images were calculated. RESULTS A high-level correlation between voxel values of cone-beam CT and BMDs of multislice CT was observed (r=0.965). CONCLUSION It was suggested that voxel values of mandibular cancellous bone in cone-beam CT could be used to estimate bone density.

Reproducibility of maxillofacial anatomic landmarks on 3-dimensional computed tomographic images determined with the 95% confidence ellipse method.

OBJECTIVE To assess the plotting reproducibility of landmarks on 3-dimensional computed tomography (3D-CT) images through use of the 95% confidence ellipse in order to propose sufficiently stable coordinate systems for 3D-CT measurements. MATERIALS AND METHODS Six dentists plotted 19 landmarks twice on 3D-CT images. Scatterplots and the 95% ellipses were produced 3-dimensionally, and the areas of the ellipses were calculated for evaluating the reproducibility of landmarks. RESULTS The plotting reproducibility of each landmark showed characteristic features. Among five landmarks (the sella [S], nasion [N], basion [Ba], orbitale [Or], and true porion [Po]) that are frequently used as reference points on cephalograms, Ba showed the smallest areas for all three coordinate axes, indicating high reproducibility. The coronoid process (CP) and the tooth-related landmarks showed relatively high reproducibility. CONCLUSION Sufficiently stable coordinate axes could be proposed for different treatments and studies.

Roots of the maxillary first and second molars in horizontal relation to alveolar cortical plates and maxillary sinus: computed tomography assessment for infection spread

The purposes of this study were to investigate the horizontal relationship of the roots of maxillary molars with the cortical plates and the maxillary sinus and to investigate the influence of these relationships on the spread of odontogenic infection. Computed tomography images of 120 control subjects and 49 patients with infection originating in the maxillary first or second molar were investigated. In the control group, more than 60% of the first molar roots contacted both palatal and buccal cortical plates (type A), while such contact was not seen in more than 60% of second molars. The floor of maxillary sinus was most frequently observed at the level between the bifurcation and apices of roots in both first and second molars. In patients with infection, cortical changes were more frequently seen on the buccal side than on the palatal side, and 80% of patients with buccal cortical change showed the position in which the buccal roots were close to the buccal cortical plate. Mucosal thickening of the maxillary sinus was found in 87.8%. The buccopalatal spread of odontogenic infection originating in the maxillary first and second molars was influenced by the horizontal root position in relation to the cortices.

Observer agreement in the detection of proximal caries with direct digital intraoral radiography.

OBJECTIVE The aim of this study was to compare several values for consistency obtained by charged-coupled-device-based direct digital intraoral radiography with those obtained by conventional film-based radiography to evaluate observer agreement in determining the depth of proximal caries. STUDY DESIGN A total of 93 proximal surfaces on radiologic images that were obtained by both the conventional film-based bite-wing technique and by direct digital intraoral radiography were evaluated by six observers. One of these observers also evaluated the same images six months after the initial evaluation. The kappa value, consistency ratio, agreement ratio, and Kendalls correlation coefficient were calculated for interobserver and intraobserver agreement. RESULTS The overall kappa values for interobserver agreement were 0.439 and 0.424 in the direct digital system and the film-based radiography, respectively. The depth-related change of the values showed similar patterns in the two modalities for both interobserver and intraobserver agreement. CONCLUSION The digital intraoral system resulted in no deterioration in observer agreement, and it presents no problems for clinical use with respect to the reliability of diagnosis.

Can Cephalometric Indices and Subjective Evaluation Be Consistent for Facial Asymmetry

The purpose of this study was to investigate the relationship between the subjective evaluation of facial asymmetry and seven cephalometric indices. Ten orthodontists subjectively evaluated the frontal photographs of 100 subjects and categorized them into three categories, ie, category I--symmetrical view; category II--a little asymmetry not requiring treatment; and category III--marked asymmetry requiring treatment. Seven indices that were used to evaluate facial asymmetry were determined using frontal cephalographs of these patients. Interobserver agreement was assessed using Cohens kappa statistic. Agreement among the observers for category III was higher than for categories I and II. To define the characteristics of each category, the cephalometric indices, which at least eight observers agreed on, were compared between the categories. No differences were found in any of the indices between categories I and II. Five indices showed differences between category III and the other categories. Among them, the distance of Me from the vertical reference line was the most relevant index for the subjective evaluation of facial asymmetry. When a discrepancy is found between skeletal measurements and a subjective evaluation, the influence of soft tissue structures should be considered in facial asymmetry.