Eileen M. Hotze

Vertical collapse of a cytolysin prepore moves its transmembrane β-hairpins to the membrane

Perfringolysin O (PFO) is a prototype of the large family of pore‐forming cholesterol‐dependent cytolysins (CDCs). A central enigma of the cytolytic mechanism of the CDCs is that their membrane‐spanning β‐hairpins (the transmembrane amphipathic β‐hairpins (TMHs)) appear to be ∼40 Å too far above the membrane surface to cross the bilayer and form the pore. We now present evidence, using atomic force microscopy (AFM), of a significant difference in the height by which the prepore and pore protrude from the membrane surface: 113±5 Å for the prepore but only 73±5 Å for the pore. Time‐lapse AFM micrographs show this change in height in real time. Moreover, the monomers in both complexes exhibit nearly identical surface features and these results in combination with those of spectrofluorimetric analyses indicate that the monomers remain in a perpendicular orientation to the bilayer plane during this transition. Therefore, the PFO undergoes a vertical collapse that brings its TMHs to the membrane surface so that they can extend across the bilayer to form the β‐barrel pore.

Mechanism of Membrane Insertion of a Multimeric β-Barrel Protein: Perfringolysin O Creates a Pore Using Ordered and Coupled Conformational Changes

Perfringolysin O, a bacterial cytolytic toxin, forms unusually large pores in cholesterol-containing membranes by the spontaneous insertion of two of its four domains into the bilayer. By monitoring the kinetics of domain-specific conformational changes and pore formation using fluorescence spectroscopy, the temporal sequence of domain-membrane interactions has been established. One membrane-exposed domain does not penetrate deeply into the bilayer and is not part of the actual pore, but is responsible for membrane recognition. This domain must bind to the membrane before insertion of the other domain into the bilayer is initiated. The two domains are conformationally coupled, even though they are spatially separated. Thus, cytolytic pore formation is accomplished by a novel mechanism of ordered conformational changes and interdomain communication.

Only two amino acids are essential for cytolytic toxin recognition of cholesterol at the membrane surface

The recognition and binding of cholesterol is an important feature of many eukaryotic, viral, and prokaryotic proteins, but the molecular details of such interactions are understood only for a few proteins. The pore-forming cholesterol-dependent cytolysins (CDCs) contribute to the pathogenic mechanisms of a large number of Gram-positive bacteria. Cholesterol dependence of the CDC mechanism is a hallmark of these toxins, yet the identity of the CDC cholesterol recognition motif has remained elusive. A detailed analysis of membrane interactive structures at the tip of perfringolysin O (PFO) domain 4 reveals that a threonine-leucine pair mediates CDC recognition of and binding to membrane cholesterol. This motif is conserved in all known CDCs and conservative changes in its sequence or order are not well tolerated. Thus, the Thr-Leu pair constitutes a common structural basis for mediating CDC-cholesterol recognition and binding, and defines a unique paradigm for membrane cholesterol recognition by surface-binding proteins.

Membrane Assembly of the Cholesterol-Dependent Cytolysin Pore Complex

The cholesterol-dependent cytolysins (CDCs) are a large family of pore-forming toxins that are produced, secreted and contribute to the pathogenesis of many species of Gram-positive bacteria. The assembly of the CDC pore-forming complex has been under intense study for the past 20 years. These studies have revealed a molecular mechanism of pore formation that exhibits many novel features. The CDCs form large β-barrel pore complexes that are assembled from 35 to 40 soluble CDC monomers. Pore formation is dependent on the presence of membrane cholesterol, which functions as the receptor for most CDCs. Cholesterol binding initiates significant secondary and tertiary structural changes in the monomers, which lead to the assembly of a large membrane embedded β-barrel pore complex. This review will focus on the molecular mechanism of assembly of the CDC membrane pore complex and how these studies have led to insights into the mechanism of pore formation for other pore-forming proteins. This article is part of a Special Issue entitled: Protein Folding in Membranes.

Monomer-Monomer Interactions Drive the Prepore to Pore Conversion of a β-Barrel-forming Cholesterol-dependent Cytolysin

Perfringolysin O (PFO), a cholesterol-dependent cytolysin, forms large oligomeric pore complexes comprised of up to 50 PFO molecules. In the present studies a mutant of PFO (PFOY181A) has been identified that traps PFO in a multimeric prepore complex that cannot insert its transmembrane β-hairpins and therefore cannot form a pore. Remarkably, PFOY181A can be induced to insert its transmembrane β-hairpins if functional PFO is incorporated into the PFOY181A oligomeric prepore complex. Furthermore, the transition from prepore to pore appears to be an “all or none” process; partial insertion of the transmembrane β-barrel does not occur. Therefore, cooperative interactions between the monomers of the prepore drive the prepore to pore conversion that results in the formation of the transmembrane β-barrel.

Structural elements of the cholesterol-dependent cytolysins that are responsible for their cholesterol-sensitive membrane interactions

The pore-forming mechanism of the cholesterol-dependent cytolysins (CDCs) exhibits an absolute requirement for membrane cholesterol. The structural elements of the CDCs that mediate this interaction are not well understood. Three short hydrophobic loops (L1–L3) and a highly conserved undecapeptide sequence at the tip of domain 4 of the CDC structure are known to anchor the CDC to the membrane. It has been thought that the undecapeptide directly mediates the interaction of the CDCs with a cholesterol-rich cell surface. Herein we show that the L1–L3 loops, not the undecapeptide, are responsible for mediating the specific interaction of the CDCs with cholesterol-rich membranes. The membrane insertion of the undecapeptide was uncoupled from membrane binding by the covalent modification of the undecapeptide cysteine thiol. Modification of the cysteine prevented prepore to pore conversion, but did not affect membrane binding, thus demonstrating that undecapeptide membrane insertion follows that of the L1–L3 loops. These studies provide an example of a structural motif that specifically mediates the interaction of a bacterial toxin with a cholesterol-rich membrane.

Mapping dominant-negative mutations of anthrax protective antigen by scanning mutagenesis

The protective antigen (PA) moiety of anthrax toxin transports edema factor and lethal factor to the cytosol of mammalian cells by a mechanism that depends on its ability to oligomerize and form pores in the endosomal membrane. Previously, some mutated forms of PA, designated dominant negative (DN), were found to coassemble with wild-type PA and generate defective heptameric pore-precursors (prepores). Prepores containing DN–PA are impaired in pore formation and in translocating edema factor and lethal factor across the endosomal membrane. To create a more comprehensive map of sites within PA where a single amino acid replacement can give a DN phenotype, we used automated systems to generate a Cys-replacement mutation for each of the 568 residues of PA63, the active 63-kDa proteolytic fragment of PA. Thirty-three mutations that reduced PAs ability to mediate toxicity at least 100-fold were identified in all four domains of PA63. A majority (22) were in domain 2, the pore-forming domain. Seven of the domain-2 mutations, located in or adjacent to the 2β6 strand, the 2β7 strand, and the 2β10-2β11 loop, gave the DN phenotype. This study demonstrates the feasibility of high-throughput scanning mutagenesis of a moderate sized protein. The results show that DN mutations cluster in a single domain and implicate 2β6 and 2β7 strands and the 2β10–2β11 loop in the conformational rearrangement of the prepore to the pore. They also add to the repertoire of mutations available for structure–function studies and for designing new antitoxic agents for treatment of anthrax.

Specific Protein-Membrane Contacts Are Required for Prepore and Pore Assembly by a Cholesterol-dependent Cytolysin

Three short hydrophobic loops and a conserved undecapeptide at the tip of domain 4 (D4) of the cholesterol-dependent cytolysins (CDCs) mediate the binding of the CDC monomers to cholesterol-rich cell membranes. But intermedilysin (ILY), from Streptococcus intermedius, does not bind to cholesterol-rich membranes unless they contain the human protein CD59. This observation suggested that the D4 loops, which include loops L1-L3 and the undecapeptide, of ILY were no longer required for its cell binding. However, we show here that membrane insertion of the D4 loops is required for the cytolysis by ILY. Receptor binding triggers changes in the structure of ILY that are necessary for oligomerization, but membrane insertion of the D4 loops is critical for oligomer assembly and pore formation. Defects that prevent membrane insertion of the undecapeptide also block assembly of the prepore oligomer, while defects in the membrane insertion of the L1-L3 loops prevent the conversion of the prepore oligomer to the pore complex. These studies reveal that pore formation by ILY, and probably other CDCs, is affected by an intricate and coupled sequence of interactions between domain 4 and the membrane.

Conformational Changes During Pore Formation by the Perforin-Related Protein Pleurotolysin.

Membrane attack complex/perforin-like (MACPF) proteins comprise the largest superfamily of pore-forming proteins, playing crucial roles in immunity and pathogenesis. Soluble monomers assemble into large transmembrane pores via conformational transitions that remain to be structurally and mechanistically characterised. Here we present an 11 Å resolution cryo-electron microscopy (cryo-EM) structure of the two-part, fungal toxin Pleurotolysin (Ply), together with crystal structures of both components (the lipid binding PlyA protein and the pore-forming MACPF component PlyB). These data reveal a 13-fold pore 80 Å in diameter and 100 Å in height, with each subunit comprised of a PlyB molecule atop a membrane bound dimer of PlyA. The resolution of the EM map, together with biophysical and computational experiments, allowed confident assignment of subdomains in a MACPF pore assembly. The major conformational changes in PlyB are a ∼70° opening of the bent and distorted central β-sheet of the MACPF domain, accompanied by extrusion and refolding of two α-helical regions into transmembrane β-hairpins (TMH1 and TMH2). We determined the structures of three different disulphide bond-trapped prepore intermediates. Analysis of these data by molecular modelling and flexible fitting allows us to generate a potential trajectory of β-sheet unbending. The results suggest that MACPF conformational change is triggered through disruption of the interface between a conserved helix-turn-helix motif and the top of TMH2. Following their release we propose that the transmembrane regions assemble into β-hairpins via top down zippering of backbone hydrogen bonds to form the membrane-inserted β-barrel. The intermediate structures of the MACPF domain during refolding into the β-barrel pore establish a structural paradigm for the transition from soluble monomer to pore, which may be conserved across the whole superfamily. The TMH2 region is critical for the release of both TMH clusters, suggesting why this region is targeted by endogenous inhibitors of MACPF function.

Characterization of a streptococcal cholesterol-dependent cytolysin with a Lewis y and b specific lectin domain

The cholesterol-dependent cytolysins (CDCs) are a large family of pore-forming toxins that often exhibit distinct structural changes that modify their pore-forming activity. A soluble platelet aggregation factor from Streptococcus mitis (Sm-hPAF) was characterized and shown to be a functional CDC with an amino-terminal fucose-binding lectin domain. Sm-hPAF, or lectinolysin (LLY) as renamed herein, is most closely related to CDCs from Streptococcus intermedius (ILY) and Streptococcus pneumoniae (pneumolysin or PLY). The LLY gene was identified in strains of S. mitis, S. pneumoniae, and Streptococcus pseudopneumoniae. LLY induces pore-dependent changes in the light scattering properties of the platelets that mimic those induced by platelet aggregation but does not induce platelet aggregation. LLY monomers form the typical large homooligomeric membrane pore complex observed for the CDCs. The pore-forming activity of LLY on platelets is modulated by the amino-terminal lectin domain, a structure that is not present in other CDCs. Glycan microarray analysis showed the lectin domain is specific for difucosylated glycans within Lewis b (Le (b)) and Lewis y (Le (y)) antigens. The glycan-binding site is occluded in the soluble monomer of LLY but is apparently exposed after cell binding, since it significantly increases LLY pore-forming activity in a glycan-dependent manner. Hence, LLY represents a new class of CDC whose pore-forming mechanism is modulated by a glycan-binding domain.