Ekaterina Novitskaya

Control of Exciton Fluxes in an Excitonic Integrated Circuit

Efficient signal communication uses photons. Signal processing, however, uses an optically inactive medium, electrons. Therefore, an interconnection between electronic signal processing and optical communication is required at the integrated circuit level. We demonstrated control of exciton fluxes in an excitonic integrated circuit. The circuit consists of three exciton optoelectronic transistors and performs operations with exciton fluxes, such as directional switching and merging. Photons transform into excitons at the circuit input, and the excitons transform into photons at the circuit output. The exciton flux from the input to the output is controlled by a pattern of the electrode voltages. The direct coupling of photons, used in communication, to excitons, used as the device-operation medium, may lead to the development of efficient exciton-based optoelectronic devices.

Anisotropy in the compressive mechanical properties of bovine cortical bone and the mineral and protein constituents

The mechanical properties of fully demineralized, fully deproteinized and untreated cortical bovine femur bone were investigated by compression testing in three anatomical directions (longitudinal, radial and transverse). The weighted sum of the stress-strain curves of the treated bones was far lower than that of the untreated bone, indicating a strong molecular and/or mechanical interaction between the collagen matrix and the mineral phase. Demineralization and deproteinization of the bone demonstrated that contiguous, stand-alone structures result, showing that bone can be considered an interpenetrating composite material. Structural features of the samples from all groups were studied by optical and scanning electron microscopy. Anisotropic mechanical properties were observed: the radial direction was found to be the strongest for untreated bone, while the longitudinal one was found to be the strongest for deproteinized and demineralized bones. A possible explanation for this phenomenon is the difference in bone microstructure in the radial and longitudinal directions.

Microstructure, elastic properties and deformation mechanisms of horn keratin.

The structure and mechanical properties of the horns from a desert bighorn sheep, Ovis canadensis, were examined. Horns must be strong and durable as they are subjected to extreme loading impacts, making them superior structural materials. Horns are composed of alpha-keratin, a fibrous, structural protein found in hair, nails, claws and hooves. Horns have a lamellar structure (2-5microm in thickness) stacked in the radial direction with tubules (approximately 40x100microm in diameter) dispersed between the lamellae, extending along the length of the horn in the growth direction. Compression and bending tests were conducted in both rehydrated and ambient dried conditions. The yield strength and elastic modulus are anisotropic and are correlated with the orientation of the tubules. Rehydrated samples showed significant loss of strength and modulus. Microscopy of fractured samples revealed several toughening mechanisms: delamination and ligament bridging in bending and delamination and microbuckling of the lamellae in compression.

Elastic moduli of untreated, demineralized and deproteinized cortical bone: Validation of a theoretical model of bone as an interpenetrating composite material

A theoretical experimentally based multi-scale model of the elastic response of cortical bone is presented. It portrays the hierarchical structure of bone as a composite with interpenetrating biopolymers (collagen and non-collagenous proteins) and minerals (hydroxyapatite), together with void spaces (porosity). The model involves a bottom-up approach and employs micromechanics and classical lamination theories of composite materials. Experiments on cortical bone samples from bovine femur include completely demineralized and deproteinized bones as well as untreated bone samples. Porosity and microstructure are characterized using optical and scanning electron microscopy, and micro-computed tomography. Compression testing is used to measure longitudinal and transverse elastic moduli of all three bone types. The characterization of structure and properties of these three bone states provides a deeper understanding of the contributions of the individual components of bone to its elastic response and allows fine tuning of modeling assumptions. Very good agreement is found between theoretical modeling and compression testing results, confirming the validity of the interpretation of bone as an interpenetrating composite material.

A comparative study of young and mature bovine cortical bone.

The mechanical properties and microstructure of young and mature bovine femur bone were investigated by optical microscopy and compression testing in the longitudinal and transverse directions for untreated, deproteinized and demineralized cases. Optical microscopy revealed that mature bone has a more established and less porous microstructure compared to young bone. Mature bone was found to be stronger in both directions for the untreated and deproteinized cases. Mature untreated bone was also found to be stiffer and less tough compared to young bone in both directions. These results are related to the increase in mineralization of mature bone and significant microstructural differences. Young bone was found to be stronger in both directions for the demineralized case, which is attributed to alterations in the collagen network with age.

Highly deformable bones: unusual deformation mechanisms of seahorse armor.

Multifunctional materials and devices found in nature serve as inspiration for advanced synthetic materials, structures and robotics. Here, we elucidate the architecture and unusual deformation mechanisms of seahorse tails that provide prehension as well as protection against predators. The seahorse tail is composed of subdermal bony plates arranged in articulating ring-like segments that overlap for controlled ventral bending and twisting. The bony plates are highly deformable materials designed to slide past one another and buckle when compressed. This complex plate and segment motion, along with the unique hardness distribution and structural hierarchy of each plate, provide seahorses with joint flexibility while shielding them against impact and crushing. Mimicking seahorse armor may lead to novel bio-inspired technologies, such as flexible armor, fracture-resistant structures or prehensile robotics.

Effect of starch on the mechanical and in vitro properties of collagen-hydroxyapatite sponges for applications in dentistry.

This study sought to improve the mechanical and blood-absorbing properties of collagen sponges, while keeping them compressible, by incorporating blended hydroxyapatite (HA)-starch. Results were compared with CollaPlug(®) (pure collagen). The elastic modulus increased from 1.5±0.2kPa for CollaPlug(®) to 49±8kPa for sponges with composition 1:4:10 (collagen:HA:starch, by weight). The modified microstructure and surface area provided by the starch granules on the sponges improved cell viability. Sponges with composition 1:4:10 maintained their blood-clotting capability with almost no change from 5 to 15min after contact with blood, while CollaPlug(®) diminished to about half its capacity to absorb blood and form clots. Incorporation of HA-starch into the sponges with composition of 1:4:10, increased the elastic modulus of the collagen-HA sponges, making them more structurally robust. The viability of cells and the blood-clotting capability increased with starch incorporation.

Experimentally-based multiscale model of the elastic moduli of bovine trabecular bone and its constituents

The elastic moduli of trabecular bone were modeled using an analytical multiscale approach. Trabecular bone was represented as a porous nanocomposite material with a hierarchical structure spanning from the collagen-mineral level to the trabecular architecture level. In parallel, compression testing was done on bovine femoral trabecular bone samples in two anatomical directions, parallel to the femoral neck axis and perpendicular to it, and the measured elastic moduli were compared with the corresponding theoretical results. To gain insights on the interaction of collagen and minerals at the nanoscale, bone samples were deproteinized or demineralized. After such processing, the treated samples remained as self-standing structures and were tested in compression. Micro-computed tomography was used to characterize the hierarchical structure of these three bone types and to quantify the amount of bone porosity. The obtained experimental data served as inputs to the multiscale model and guided us to represent bone as an interpenetrating composite material. Good agreement was found between the theory and experiments for the elastic moduli of the untreated, deproteinized, and demineralized trabecular bone.

Kinetic characterization of the deproteinization of trabecular and cortical bovine femur bones

The present study proposes an interpretation of the mechanism of bone deproteinization. Cortical and trabecular bovine femur bones were deproteinized using 6% NaOCl (37, 50, 60°C). The kinetic parameters (rate constant and activation energy) were calculated, and the surface area of each type of bone was considered. A statistical analysis of the rate constants shows that cortical bone deproteinizes at a lower rate than trabecular. The activation energy is higher for trabecular than cortical bone, and no significant differences are found in the protein concentration values for both bones. Therefore, although trabecular bone deproteinizes at a higher rate than cortical, trabecular bone requires more energy for the deproteinization reaction to take place. Considering that both types of bones are constituted by mineral, protein, and water; the present work shows that the individual inner matrix architecture of trabecular and cortical bones, along with characteristics such as the mineral concentration and its bonding with collagen fibers, may be the responsible factors that control protein depletion.

Creep of trabecular bone from the human proximal tibia.

Creep is the deformation that occurs under a prolonged, sustained load and can lead to permanent damage in bone. Creep in bone is a complex phenomenon and varies with type of loading and local mechanical properties. Human trabecular bone samples from proximal tibia were harvested from a 71-year old female cadaver with osteoporosis. The samples were initially subjected to one cycle load up to 1% strain to determine the creep load. Samples were then loaded in compression under a constant stress for 2h and immediately unloaded. All tests were conducted with the specimens soaked in phosphate buffered saline with proteinase inhibitors at 37 °C. Steady state creep rate and final creep strain were estimated from mechanical testing and compared with published data. The steady state creep rate correlated well with values obtained from bovine tibial and human vertebral trabecular bone, and was higher for lower density samples. Tissue architecture was analyzed by micro-computed tomography (μCT) both before and after creep testing to assess creep deformation and damage accumulated. Quantitative morphometric analysis indicated that creep induced changes in trabecular separation and the structural model index. A main mode of deformation was bending of trabeculae.