Elena Martínez

Stem cell differentiation by functionalized micro- and nanostructured surfaces.

New fabrication technologies and, in particular, new nanotechnologies have provided biomaterial and biomedical scientists with enormous possibilities when designing customized supports and scaffolds with controlled nanoscale topography and chemistry. The main issue now is how to effectively design these components and choose the appropriate combination of structure and chemistry to tailor towards applications as challenging and complex as stem cell differentiation. Occasionally, an incomplete knowledge of the fundamentals of biological differentiation processes has hampered this issue. However, the recent technological advances in creating controlled cellular microenvironments can be seen as a powerful tool for furthering fundamental biology studies. This article reviews the main strategies followed to achieve solutions to this challenge, particularly emphasizing the working hypothesis followed by the authors to elucidate the mechanisms behind the observed effects of structured surfaces on cell behavior.

Impedimetric immunosensor for human serum albumin detection on a direct aldehyde-functionalized silicon nitride surface.

In this work we report the fabrication and characterization of a label-free impedimetric immunosensor based on a silicon nitride (Si(3)N(4)) surface for the specific detection of human serum albumin (HSA) proteins. Silicon nitride provides several advantages compared with other materials commonly used, such as gold, and in particular in solid-state physics for electronic-based biosensors. However, few Si(3)N(4)-based biosensors have been developed; the lack of an efficient and direct protocol for the integration of biological elements with silicon-based substrates is still one of its the main drawbacks. Here, we use a direct functionalization method for the direct covalent binding of monoclonal anti-HSA antibodies on an aldehyde-functionalized Si-p/SiO(2)/Si(3)N(4) structure. This methodology, in contrast with most of the protocols reported in literature, requires less chemical reagents, it is less time-consuming and it does not need any chemical activation. The detection capability of the immunosensor was tested by performing non-faradaic electrochemical impedance spectroscopy (EIS) measurements for the specific detection of HSA proteins. Protein concentrations within the linear range of 10(-13)-10(-7) M were detected, showing a sensitivity of 0.128 Ω μM(-1) and a limit of detection of 10(-14) M. The specificity of the sensor was also addressed by studying the interferences with a similar protein, bovine serum albumin. The results obtained show that the antibodies were efficiently immobilized and the proteins detected specifically, thus, establishing the basis and the potential applicability of the developed silicon nitride-based immunosensor for the detection of proteins in real and more complex samples.

The role of surface energy of technical polymers in serum protein adsorption and MG-63 cells adhesion

UNLABELLED Polymeric materials are widely used as supports for cell culturing in medical implants and as scaffolds for tissue regeneration. However, novel applications in the biosensor field require materials to be compatible with cell growth and at the same time be suitable for technological processing. Technological polymers are key materials in the fabrication of disposable parts and other sensing elements. As such, it is essential to characterize the surface properties of technological polymers, especially after processing and sterilization. It is also important to understand how technological polymers affect cell behavior when in contact with polymer materials. Therefore, the aim of this research was to study how surface energy and surface roughness affect the biocompatibility of three polymeric materials widely used in research and industry: poly(methyl methacrylate), polystyrene, and poly(dimethylsiloxane). Glass was used as the control material. FROM THE CLINICAL EDITOR Polymeric materials are widely used as supports for cell culturing in medical implants and as scaffolds for tissue regeneration. The aim of this research is to study how surface energy and surface roughness affect the biocompatibility of three polymeric materials widely used in research and industry: poly(methylmethacrylate) (PMMA), polystyrene (PS), and poly(dimethylsiloxane) (PDMS).

Micro- and nanostructuring of poly(ethylene-2,6-naphthalate) surfaces, for biomedical applications, using polymer replication techniques

Here we investigate the formation of superficial micro- and nanostructures in poly(ethylene-2,6-naphthalate) (PEN), with a view to their use in biomedical device applications, and compare its performance with a polymer commonly used for the fabrication of these devices, poly(methyl methacrylate) (PMMA). The PEN is found to replicate both micro- and nanostructures in its surface, albeit requiring more forceful replication conditions than PMMA, producing a slight increase in surface hydrophilicity. This ability to form micro/nanostructures, allied to biocompatibility and good optical transparency, suggests that PEN could be a useful material for production of, or for incorporation into, transparent devices for biomedical applications. Such devices will be able to be autoclaved, due to the polymers high temperature stability, and will be useful for applications where forceful experimental conditions are required, due to a superior chemical resistance over PMMA.

Adhesion and migration of cells responding to microtopography

It is known that cells respond strongly to microtopography. However, cellular mechanisms of response are unclear. Here, we study wild-type fibroblasts responding to 25 µm(2) posts and compare their response to that of FAK(-/-) fibroblasts and fibroblasts with PMA treatment to stimulate protein kinase C (PKC) and the small g-protein Rac. FAK knockout cells modulated adhesion number and size in a similar way to cells on topography; that is, they used more, smaller adhesions, but migration was almost completely stalled demonstrating the importance of FAK signaling in contact guidance and adhesion turnover. Little similarity, however, was observed to PKC stimulated cells and cells on the topography. Interestingly, with PKC stimulation the cell nuclei became highly deformable bringing focus on these surfaces to the study of metastasis. Surfaces that aid the study of cellular migration are important in developing understanding of mechanisms of wound healing and repair in aligned tissues such as ligament and tendon.

Facile Modification of Silica Substrates Provides a Platform for Direct‐Writing Surface Click Chemistry

Please click here: a facile two-step functionalization strategy for silicon oxide-based substrates generates a stable platform for surface click chemistry via direct writing. The suitability of the obtained substrates is proven by patterning with two different direct-writing techniques and three different molecules.

Protein patterning on hydrogels by direct microcontact printing: application to cardiac differentiation

An extended microcontact printing technique to chemically pattern hydrogels is reported. The procedure employs standard polydimethylsiloxane stamps and requires minor pre-processing of the hydrogels by freeze-drying. Micropatterned Matrigel™ and gelatin hydrogels induce NIH-3T3 cell alignment and elongation. Furthermore, human embryonic stem cells cultured on fibronectin-patterned hydrogels display beating foci earlier than those cultured on non-patterned substrates.

Continuous bone morphogenetic protein-2 gradients for concentration effect studies on C2C12 osteogenic fate.

UNLABELLED Cells can respond to small changes in a varying concentration of exogenous signaling molecules. Here we propose the use of continuous surface chemical gradients for the in-depth study of dose-dependent effects on cells. A continuous surface gradient of bone morphogenetic protein-2 (BMP-2) is presented. The gradient covers a narrow range of surface densities (from 1.4 to 2.3 pmol/cm(2)) with a shallow slope (0.9 pmol/cm(3)). These characteristics represent a quasi-homogeneous surface concentration at the cell scale, which is crucial for cell screening studies. Cell fate evaluation at early stages of osteogenesis in C2C12 cells, indicates the potential of continuous gradients for in vitro screening applications. FROM THE CLINICAL EDITOR The authors propose the use of surface-applied continuous chemical gradients for in-depth study of dose-dependent effects on cells. The method is demonstrated using BMP-2 proteins on C2C12 cells as a model system.

Single Stem Cell Positioning on Polylysine and Fibronectin Microarrays

Arrays of human umbilical cord blood-neural stem cells have been patterned in high density at single cell resolution. Pre-patterns of adhesive molecules, i.e. fibronectin and poly-L-lysine, have been produced on anti-adhesive poly (ethylene) oxide films deposited by plasma-enhanced chemical vapour deposition, which prevents cell adsorption. The structures consisted of adhesive squares and lines with 10μm lateral dimensions, which correspond approximately to the size of one cell nucleus, separated by 10μm anti-adhesive gap. The stem cells cultured on these platforms redistribute their cytoplasm on the permitted areas. Spherical cells were deposited on the square patterns in a single cell mode, while on the lines they spread longitudinally; the extent of elongation being dependent on the specific (fibronectin) or non-specific (poly-L-lysine) attachment biomolecule. The cell patterns were retained up to 12 days, which will be useful for recording statistical data of individual chronic responses to chemical, physical or physiologically relevant stimuli.

Myocardial commitment from human pluripotent stem cells: Rapid production of human heart grafts.

Genome editing on human pluripotent stem cells (hPSCs) together with the development of protocols for organ decellularization opens the door to the generation of autologous bioartificial hearts. Here we sought to generate for the first time a fluorescent reporter human embryonic stem cell (hESC) line by means of Transcription activator-like effector nucleases (TALENs) to efficiently produce cardiomyocyte-like cells (CLCs) from hPSCs and repopulate decellularized human heart ventricles for heart engineering. In our hands, targeting myosin heavy chain locus (MYH6) with mCherry fluorescent reporter by TALEN technology in hESCs did not alter major pluripotent-related features, and allowed for the definition of a robust protocol for CLCs production also from human induced pluripotent stem cells (hiPSCs) in 14 days. hPSCs-derived CLCs (hPSCs-CLCs) were next used to recellularize acellular cardiac scaffolds. Electrophysiological responses encountered when hPSCs-CLCs were cultured on ventricular decellularized extracellular matrix (vdECM) correlated with significant increases in the levels of expression of different ion channels determinant for calcium homeostasis and heart contractile function. Overall, the approach described here allows for the rapid generation of human cardiac grafts from hPSCs, in a total of 24 days, providing a suitable platform for cardiac engineering and disease modeling in the human setting.