Eliana Dantas da Costa

Development and validation of a questionnaire to evaluate infection control in oral radiology

OBJECTIVES To create and validate a questionnaire to evaluate infection control in oral radiology. METHODS The questionnaire was developed after review of the literature, which included published articles and the biosafety protocols available from healthcare agencies. The initial version of the questionnaire was composed of 14 multiple choice questions and was divided into 3 domains on handwashing, disinfection/protection of surfaces and disinfectant used. Content validity was assessed by two expert committees, which reviewed the content and scope of the questionnaire and the relevance of each item, respectively. Reliability was evaluated using test-retest and internal consistency methods with 115 undergraduate dentistry students. Construct validity was assessed using the known-groups technique and factor analysis. The known-groups technique involved 641 undergraduate dentistry students, 20 PhD students and 15 oral radiology professors. In the factor analysis, 3 radiology technicians also participated in addition to the 641 undergraduates, 20 PhD students and 15 oral radiology professors. RESULTS The content validity results were found to be satisfactory to excellent for the ordinal variables (intraclass correlation coefficient = 0.722-1.000) and good to great for the yes/no questions (kappa = 0.662-0.913) in terms of reliability and good internal consistency (Cronbachs alpha = 0.88). After a factor analysis, some questions were excluded, and the questions were grouped into new domains. Significant differences were observed between answers from different groups. The final version of the questionnaire was composed of nine domains. CONCLUSIONS The questionnaire created was found to exhibit good psychometric properties for assessing infection control in oral radiology.

The assessment of adherence to infection control in oral radiology using newly developed and validated questionnaire (QICOR)

OBJECTIVES: To assess the infection control in oral radiology among radiologists and dentists of diverse dentistry clinical specialties and among dentistry students. METHODS: A Questionnaire on Infection Control in Oral Radiology was applied to 1006 dentists and 1203 dentistry students. For assessment of infection control, the scores of the questionnaire were dichotomized in high and low through the median. Simple logistic regression models were set for adherence to infection control and independent variables, estimating the crude odds ratios with the respective 95% confidence intervals. The variables with p < 0.20 in the individual analyses were tested in multiple logistic regression models, remaining in the final model the variables with p ≤ 0.05. RESULTS: Individual and adjusted association analysis showed that female dentists have 1.41 ([95% CI: 1.08-1.84)] more adherence odds to infection control when compared with males (p < 0.05). There was no significant association in regarding age, time of education in dentistry, an undergraduate degree from a public or private school, and work in public and/or private clinics. There were also no differences among radiologists and dentists of other clinical specialties. The students from the last year of the dental schools had 1.7 [95% CI (1.13-2.57)] more chances of less adherence to infection control (p = 0.0001). There was no significant association with respect to sex, age and public or private schools. CONCLUSIONS: Educational procedures should be conducted in relation to infection control protocols in oral radiology, especially among male dentists, regardless clinic specialty, and among the students of the last year of the dental school.

Correlation between midline deviation and condylar position in patients with Class II malocclusion: A cone-beam computed tomography evaluation

Introduction: Midline deviation of the mandible and maxilla can affect craniofacial growth and occlusion and cause consequences to the temporomandibular joint. The aim of this study was to evaluate the lateral displacement of the skeletal and dental midlines in relation to the condyle head position in Class II patients with cone‐beam computed tomography. Methods: We used 82 cone‐beam computed tomography images. The lateral displacement of the skeletal and dental midlines considering the 3‐dimensional reference plane was analyzed with points in the maxillary and mandibular central incisors, anterior nasal spine, and menton. The condyle‐fossa relationship, concentric position of the condyles, and dimensional and positional symmetries between the right and left condyles were evaluated. Results: There was a statistically significant difference regarding anterior nasal spine with maxillary central incisor, menton, and mandibular central incisor points for both sides, and also for maxillary central incisor‐menton for the displacement of the left side. We found differences in the temporomandibular joint for inclination and diameter measurements of the condylar process. Strong correlations were observed between the maxilla and the condylar process diameter (right side) and the distance between the geometric centers (left side), in addition to a strong correlation between the sagittal midline displacement and the geometric center differences on the right and left sides. Conclusions: In patients with Class II malocclusion, lateral displacement of skeletal and dental midlines in relation to the condyle head position has a significant correlation with the anteroposterior difference between the geometric center of the right and left condylar processes. HIGHLIGHTSLateral displacements of the skeletal and dental midlines in relation to the condyle were measured.Three‐dimensional CBCT images show applicability for the diagnosis of facial asymmetry.Correlation was found between center of the right and left condyles in relation to midline change.

Monostotic fibrous dysplasia: a case report with cone-beam computed tomography findings

ABSTRACT Fibrous dysplasia is a benign fibrous-osseous lesion in which normal bone is replaced by fibrous connective tissue and immature bone, affecting only one (monostotic) or several bones (polyostotic) and mainly occurring in children and young adults. When present in facial bones, the maxilla is more frequently involved than the mandible, which can cause facial asymmetry in addition to dental complications. In the image exams, the main characteristic of fibrous dysplasia is its unpolished glass appearance. Computed tomography is the ideal method for evaluating this lesion and its relationship with adjacent structures. The use of conventional radiography, due to the overlapping of anatomical structures, makes it difficult to delineate the extension of the lesion. The present study is aimed at guiding dentist-surgeons on the main imaging characteristics of fibrous dysplasia by describing a case of a female 10-year-old patient presenting with this lesion in the maxilla. Indexing terms: Cone-beam computed tomography. Fibrous dysplasia monostotic. Maxilla.

Diagnosis of ethmoid sinolith by cone-beam computed tomography: case report and literature review

IntroductionThe aim of this study was to report the first case of diagnosis of a rare ethmoid sinolith by cone-beam computed tomography (CBCT) and discuss the importance of carefully assessing the entire volume of the images regardless of the region of interest.Case presentationA 22-year-old woman underwent CBCT examination to assess the upper permanent canine teeth. Analysis of the entire volume of CBCT revealed an oval-shaped hyperdense, homogeneous, expansive formation with defined boundaries located in the ethmoid bone. The differential diagnosis of a sinolith in the ethmoid sinus was confirmed after removal of the lesion by nasoendoscopy and histopathological examination.ConclusionThe diagnosis of lesions in the ethmoid sinus is challenging because of the complex anatomy of this region. Considering the limitations of two-dimensional X-ray examination, CBCT examination has become an important imaging modality for the diagnosis of these calcifications. In addition, the ability of the dental surgeon to assess the entire volume of the CBCT images and the knowledge of imaging features of these calcifications allows for recognition of incidental findings, facilitating early diagnosis and appropriate treatment.

Tomografía Computarizada de Haz Cónico en el Diagnóstico de Diente Invaginado: Presentación De Un Caso

The aim of this report is to present a case of dens invaginatus asymptomatic discovered after exam cone beam computed tomography. A 20-year-old patient attended the clinic Radiology to perform tomography to fracture research at the root of the tooth 15. However, the examination was observed the presence of a conoid supernumerary tooth between the tooth located roots 11 and 12, which had a hyperdense line to the apex of the root, representing the invagination of the enamel, dens invaginatus feature. It was also observed extensive hypodense image in the periapical region, with areas of external resorption both in supernumerary tooth as we ll as the roots of teeth 11 and 12. The treatment consisted of surgery for dens invaginatus extraction. The dentists should be aware of the imaginological characteristics of the anomalies that can affect the teeth/jaws, which can be discovered in tests for routine imaging and proper conduct for the treatment of patients.

Ankylosis of Permanent First Molar: Diagnosis by Cone Beam Computed Tomography

Ankylosis is an anomaly of tooth eruption characterized by the fusion of cementum and alveolar bone, and may affect from small regions to the entire root surface. Clinical assessment combined with imaging exams can aid diagnosis. Radiographic testing enables assessing only proximal regions of possibly affected roots. Whereas cone beam computed tomography (CBCT) allows a three-dimensional assessment of axial, coronal, and sagittal planes of all dental extension, eliminating thus overlapping images and helping to confirm the correct diagnosis. The present study contains a case report of a male patient with ankylosis in tooth 16 diagnosed by CBCT, aiming at providing information for dentists about this anomaly, its characteristics and situations in which CBCT should be indicated.

Authors' response: development and validation of a questionnaire to evaluate infection control in oral radiology—consistent statistical analyses and methodology

Division of Oral Radiology Department of Oral Diagnosis Piracicaba Dental School State University of Campinas

Correlation between the position of hyoid bone and subregions of the pharyngeal airway space in lateral cephalometry and cone beam computed tomography

OBJECTIVE To correlate the pharyngeal airway subregions with the positioning of the hyoid bone. MATERIAL AND METHODS The study examined 107 lateral cephalometric (LC) and cone beam computed tomography (CBCT) images. Linear and volumetric measurements of the pharyngeal subregions were made and correlated to linear measurements using hyoid triangle analysis on images of LC and multiplanar (MPR) and three-dimensional (3D) reconstructions of CBCT. RESULTS There was significant correlation between linear measurements of the pharyngeal subregions and hyoid bone position in LC images and in MPR and 3D reconstructions of the CBCT. Correlations were more frequent in the oropharynx and hypopharynx, especially for LC images. No correlations were observed between LC images or CBCT reconstructions and the volumetric measurements of the pharyngeal subregions and the position of the hyoid bone. CONCLUSION The hyoid bone position showed more correlations with oropharynx and hypopharynx airway measurements. The hyoid triangle method was not applicable to 3D images, since it showed a smaller number of measures correlated to the hyoid bone position.

Behavior and perceptions of hand hygiene practices among dental students

ABSTRACT ObjectiveTo investigate behavior and perception of hand hygiene practices among undergraduate students in a School of Dentistry.MethodsThe study adopted a qualitative technique called Collective Subject Discourse (CSD). The sample comprised students enrolled in a Public School of Dentistry, in Sao Paulo State, Brazil (n=54). Semi-structured interviews were recorded in a digital voice recorder. Data analysis was carried out by means of a quali-quantitative approach with the help of Qualiquantisoft® software.ResultsStudents showed adequate knowledge regarding guidelines about hand hygiene practices. However, they considered their procedure gloves as an effective way to avoid crossed-infection, and mentioned inadequate infrastructure of sinks and sometimes lack of consumables undermined their adherence to hand hygiene practices. They reported health professionals and professors at the Institution as being reckless with handwashing, especially before donning gloves or after removal. Students reported the school properly guided them in relation to teaching hand hygiene practices, but they stated they were careless with the recommendations. Students were very concerned if they would hypothetically be treated by professionals who did not wash their hands.ConclusionThis study identified some of the hand hygiene compliance failures among dental students. Educational strategies by means of an increase in motivation to perform hand hygiene properly, and by adjusting professor’s practices in front of the students would be crucial to improve adherence. Additionally, the improvement on the infrastructure in this institution by means of new washbasins and more available consumables would benefit hand hygiene adherence.Indexing terms: Behavior. Hand hygiene. Health human resource training. Qualitative research. Perception.