Elisa Borfecchia

Interaction of NH3 with Cu-SSZ-13 Catalyst: A Complementary FTIR, XANES, and XES Study

In the typical NH3-SCR temperature range (100-500 °C), ammonia is one of the main adsorbed species on acidic sites of Cu-SSZ-13 catalyst. Therefore, the study of adsorbed ammonia at high temperature is a key step for the understanding of its role in the NH3-SCR catalytic cycle. We employed different spectroscopic techniques to investigate the nature of the different complexes occurring upon NH3 interaction. In particular, FTIR spectroscopy revealed the formation of different NH3 species, that is, (i) NH3 bonded to copper centers, (ii) NH3 bonded to Brønsted sites, and (iii) NH4(+)·nNH3 associations. XANES and XES spectroscopy allowed us to get an insight into the geometry and electronic structure of Cu centers upon NH3 adsorption, revealing for the first time in Cu-SSZ-13 the presence of linear Cu(+) species in Ofw-Cu-NH3 or H3N-Cu-NH3 configuration.

Low-dimensional systems investigated by x-ray absorption spectroscopy: a selection of 2D, 1D and 0D cases

Over the last three decades low-dimensional systems have attracted increasing interest both from the fundamental and technological points of view due to their unique physical and chemical properties. X-ray absorption spectroscopy (XAS) is a powerful tool for the characterization of such kinds of systems, owing to its chemical selectivity and high sensitivity in interatomic distance determination. Moreover, XAS does not require long-range ordering, that is usually absent in low-dimensional systems. Finally, this technique can simultaneously provide information on electronic and local structural properties of the nanomaterials, significantly contributing to clarify the relation between their atomic structure and their peculiar physical properties. This review provides a general introduction to XAS, discussing the basic theory of the technique, the most used detection modes, the related experimental setups and some complementary relevant characterization techniques (diffraction anomalous fine structure, extended energy-loss fine structure, pair distribution function, x-ray emission spectroscopy, high-energy resolution fluorescence detected XAS and x-ray Raman scattering). Subsequently, a selection of significant applications of XAS to two-, one- and zero-dimensional systems will be presented. The selected low-dimensional systems include IV and III–V semiconductor films, quantum wells, quantum wires and quantum dots; carbon-based nanomaterials (epitaxial graphene and carbon nanotubes); metal oxide films, nanowires, nanorods and nanocrystals; metal nanoparticles. Finally, the future perspectives for the application of XAS to nanostructures are discussed.

The Cu-CHA deNOx Catalyst in Action: Temperature-Dependent NH3-Assisted Selective Catalytic Reduction Monitored by Operando XAS and XES

The small-pore Cu-CHA zeolite is today the object of intensive research efforts to rationalize its outstanding performance in the NH3-assisted selective catalytic reduction (SCR) of harmful nitrogen oxides and to unveil the SCR mechanism. Herein we exploit operando X-ray spectroscopies to monitor the Cu-CHA catalyst in action during NH3-SCR in the 150-400 °C range, targeting Cu oxidation state, mobility, and preferential N or O ligation as a function of reaction temperature. By combining operando XANES, EXAFS, and vtc-XES, we unambiguously identify two distinct regimes for the atomic-scale behavior of Cu active-sites. Low-temperature SCR, up to ∼200 °C, is characterized by balanced populations of Cu(I)/Cu(II) sites and dominated by mobile NH3-solvated Cu-species. From 250 °C upward, in correspondence to the steep increase in catalytic activity, the largely dominant Cu-species are framework-coordinated Cu(II) sites, likely representing the active sites for high-temperature SCR.

Photo-induced pyridine substitution in cis-[Ru(bpy)(2)(py)(2)]Cl(2): a snapshot by time-resolved X-ray solution scattering.

Determination of transient structures in light-induced processes is a challenging goal for time-resolved techniques. Such techniques are becoming successful in detecting ultrafast structural changes in molecules and do not require the presence of probe-like groups. Here, we demonstrate that TR-WAXS (Time-Resolved Wide Angle X-ray Scattering) can be successfully employed to study the photochemistry of cis-[Ru(bpy)(2)(py)(2)]Cl(2), a mononuclear ruthenium complex of interest in the field of photoactivatable anticancer agents. TR-WAXS is able to detect the release of a pyridine ligand and the coordination of a solvent molecule on a faster timescale than 800 ns of laser excitation. The direct measurement of the photodissociation of pyridine is a major advance in the field of time-resolved techniques allowing detection, for the first time, of the release of a multiatomic ligand formed by low Z atoms. These data demonstrate that TR-WAXS is a powerful technique for studying rapid ligand substitution processes involving photoactive metal complexes of biological interest.

X-ray transient absorption structural characterization of the 3MLCT triplet excited state of cis-[Ru(bpy)2(py)2]2+

The excited state dynamics and structure of the photochemically active complex cis-[Ru(bpy)2(py)2](2+) have been investigated using optical transient absorption (OTA) and X-ray transient absorption (XTA) spectroscopy, and density functional theory (DFT). Upon light-excitation in aqueous solution cis-[Ru(bpy)2(py)2](2+) undergoes ultrafast dissociation of one pyridine ligand to form cis-[Ru(bpy)2(py)(H2O)](2+). OTA measurements highlighted the presence of two major time components of 1700 ps and 130 ps through which the system decays to the ground-state and evolves towards the photoproduct. XTA data were acquired after 150 ps, 500 ps, and 3000 ps from laser excitation (λexc = 351 nm) and provided the transient structure of the (3)MLCT state corresponding to the longer time component in the OTA experiment. In excellent agreement with DFT, XTA shows that the (3)MLCT geometry is characterized by an elongation of the dissociating Ru-N(py) bond and a shortening of the trans Ru-N(bpy) bond with respect to the ground state. Conversely, calculations show that the (3)MC state has a highly distorted structure with Ru-N(py) bonds between 2.77-3.05 Å.

Methane to Methanol: Structure–Activity Relationships for Cu-CHA

Cu-exchanged zeolites possess active sites that are able to cleave the C-H bond of methane at temperatures ≤200 °C, enabling its selective partial oxidation to methanol. Herein we explore this process over Cu-SSZ-13 materials. We combine activity tests and X-ray absorption spectroscopy (XAS) to thoroughly investigate the influence of reaction parameters and material elemental composition on the productivity and Cu speciation during the key process steps. We find that the CuII moieties responsible for the conversion are formed in the presence of O2 and that high temperature together with prolonged activation time increases the population of such active sites. We evidence a linear correlation between the reducibility of the materials and their methanol productivity. By optimizing the process conditions and material composition, we are able to reach a methanol productivity as high as 0.2 mol CH3OH/mol Cu (125 μmol/g), the highest value reported to date for Cu-SSZ-13. Our results clearly demonstrate that high populations of 2Al Z2CuII sites in 6r, favored at low values of both Si:Al and Cu:Al ratios, inhibit the material performance by being inactive for the conversion. Z[CuIIOH] complexes, although shown to be inactive, are identified as the precursors to the methane-converting active sites. By critical examination of the reported catalytic and spectroscopic evidence, we propose different possible routes for active-site formation.

Synthesis, characterization and CO2 uptake of a chiral Co(II) metal–organic framework containing a thiazolidine-based spacer

The polytopic ligand thiazolidine-2,4-dicarboxylic acid (H2L) has been synthesised on a large scale starting from the naturally occurring amino acid L-cysteine. The (R,R)/(S,R)diastereomeric mixture has been separated into its constituents through selective precipitation of the pure (R,R) isomer from concentrated H2O/MeOH solutions. The enantiomerically pure ligand (H2L-RR) has been reacted with CoCl2·6H2O under hydrothermal conditions, with the final product being [Co(L-RR)(H2O)·H2O]∞ (1). The obtained coordination polymer is optically pure, and it maintains the chiral information that is present in its building block. Two different kinds of channels are present in the 3D structure of 1: one hydrophobic (with the sulfur atoms of the thiazolidine rings exposed) and the other hydrophilic [with the aquo ligand on Co(II) exposed, and hosting the crystallization water solvent]. 1 has been characterized through a combination of X-ray diffraction (single-crystal and powder) and spectroscopic (CD, IR, UV-Vis, XANES, EXAFS) techniques. Finally, CO2 adsorption tests conducted at 273 K and (pCO2)max = 920 torr have shown a good carbon dioxide uptake, equal to 4.7 wt%.

Redox‐Driven Migration of Copper Ions in the Cu‐CHA Zeolite as Shown by the In Situ PXRD/XANES Technique

Using quasi-simultaneous in situ PXRD and XANES, the direct correlation between the oxidation state of Cu ions in the commercially relevant deNOx NH3 -SCR zeolite catalyst Cu-CHA and the Cu ion migration in the zeolitic pores was revealed during catalytic activation experiments. A comparison with recent reports further reveals the high sensitivity of the redox-active centers concerning heating rates, temperature, and gas environment during catalytic activation. Previously, Cu+ was confirmed present only in the 6R. Results verify a novel 8R monovalent Cu site, an eventually large Cu+ presence upon heating to high temperatures in oxidative conditions, and demonstrate the unique potential in combining in situ PXRD and XANES techniques, with which both oxidation state and structural location of the redox-active centers in the zeolite framework could be tracked.

Reversible Capture and Release of Cl2 and Br2 with a Redox-Active Metal–Organic Framework

Extreme toxicity, corrosiveness, and volatility pose serious challenges for the safe storage and transportation of elemental chlorine and bromine, which play critical roles in the chemical industry. Solid materials capable of forming stable nonvolatile compounds upon reaction with elemental halogens may partially mitigate these challenges by allowing safe halogen release on demand. Here we demonstrate that elemental halogens quantitatively oxidize coordinatively unsaturated Co(II) ions in a robust azolate metal-organic framework (MOF) to produce stable and safe-to-handle Co(III) materials featuring terminal Co(III)-halogen bonds. Thermal treatment of the oxidized MOF causes homolytic cleavage of the Co(III)-halogen bonds, reduction to Co(II), and concomitant release of elemental halogens. The reversible chemical storage and thermal release of elemental halogens occur with no significant losses of structural integrity, as the parent cobaltous MOF retains its crystallinity and porosity even after three oxidation/reduction cycles. These results highlight a material operating via redox mechanism that may find utility in the storage and capture of other noxious and corrosive gases.

Nitrate–nitrite equilibrium in the reaction of NO with a Cu-CHA catalyst for NH3-SCR

The equilibrium reaction between NO and Cu-nitrate, Cu(II)-NO3− + NO(g) ⇌ Cu(II)-NO2− + NO2(g), has been proposed to be a key step in the selective catalytic reduction of NO by ammonia (NH3-SCR) over Cu-CHA catalysts and points to the presence of Cu-nitrites. Whereas the formation of gaseous NO2 has been observed, a direct observation of Cu-nitrite groups under conditions relevant to NH3-SCR has been so far unsuccessful. In an effort to identify and characterize Cu-nitrites, the reaction between Cu-nitrates hosted in the CHA zeolite and NO is investigated by Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-vis) and X-ray absorption spectroscopy (XAS). We find that NO reacts with Cu-nitrates and that about half of the Cu-nitrate species are converted. After the reaction, the Cu(II) state is different from the original oxidized state. Analysis of XAS data indicates that the final state of the Cu-CHA catalyst is consistent with the partial conversion of the Cu-nitrate species to a bidentate Cu-nitrite configuration.