Elisa Migliorini

Acceleration of neuronal precursors differentiation induced by substrate nanotopography

Embryonic stem (ES) cell differentiation in specific cell lineages is a major issue in cell biology particularly in regenerative medicine. Differentiation is usually achieved by using biochemical factors and it is not clear whether mechanical properties of the substrate over which cells are grown can affect proliferation and differentiation. Therefore, we produced patterns in polydimethylsiloxane (PDMS) consisting of groove and pillar arrays of sub‐micrometric lateral resolution as substrates for cell cultures. We analyzed the effect of different nanostructures on differentiation of ES‐derived neuronal precursors into neuronal lineage without adding biochemical factors. Neuronal precursors adhered on PDMS more effectively than on glass coverslips. We demonstrated that neuronal yield was enhanced by increasing pillars height from 35 to 400 nm. On higher pillar neuronal differentiation reaches ∼80% 96 h after plating and the largest differentiation enhancement of pillars over flat PDMS was observed during the first 6 h of culture. We conclude that PDMS nanopillars accelerate and increase neuronal differentiation. Biotechnol. Bioeng. 2011;108: 2736–2746.

Integration of confocal and atomic force microscopy images.

Atomic force microscopy (AFM) provides the possibility to map the 3D structure of viewed objects with a nanometric resolution, which cannot be achieved with other imaging methods such as conventional video imaging and confocal fluorescent microscopy. Video imaging with CCD cameras can provide an analysis of biological events with a temporal and spatial resolution not possible with AFM, while confocal imaging allows the simultaneous acquisition of immunofluorescence images. In this communication we present a simple method to combine AFM and confocal images to study differentiating embryonic stem (ES) cells-derived and dorsal root ganglia (DRG) neurons in culture. Neurons were grown on coverslips with micrometric markers that allow finding and imaging the same neuron with different microscopes. AFM and confocal images were registered using conventional methods used in Computer Science. The combination of these two techniques allows relating functional properties to morphological features of imaged neurons.

Cytokines and growth factors cross-link heparan sulfate

The glycosaminoglycan heparan sulfate (HS), present at the surface of most cells and ubiquitous in extracellular matrix, binds many soluble extracellular signalling molecules such as chemokines and growth factors, and regulates their transport and effector functions. It is, however, unknown whether upon binding HS these proteins can affect the long-range structure of HS. To test this idea, we interrogated a supramolecular model system, in which HS chains grafted to streptavidin-functionalized oligoethylene glycol monolayers or supported lipid bilayers mimic the HS-rich pericellular or extracellular matrix, with the biophysical techniques quartz crystal microbalance (QCM-D) and fluorescence recovery after photobleaching (FRAP). We were able to control and characterize the supramolecular presentation of HS chains—their local density, orientation, conformation and lateral mobility—and their interaction with proteins. The chemokine CXCL12α (or SDF-1α) rigidified the HS film, and this effect was due to protein-mediated cross-linking of HS chains. Complementary measurements with CXCL12α mutants and the CXCL12γ isoform provided insight into the molecular mechanism underlying cross-linking. Fibroblast growth factor 2 (FGF-2), which has three HS binding sites, was also found to cross-link HS, but FGF-9, which has just one binding site, did not. Based on these data, we propose that the ability to cross-link HS is a generic feature of many cytokines and growth factors, which depends on the architecture of their HS binding sites. The ability to change matrix organization and physico-chemical properties (e.g. permeability and rigidification) implies that the functions of cytokines and growth factors may not simply be confined to the activation of cognate cellular receptors.

Tuning cellular responses to BMP-2 with material surfaces

Bone morphogenetic protein 2 (BMP-2) has been known for decades as a strong osteoinductive factor and for clinical applications is combined solely with collagen as carrier material. The growing concerns regarding side effects and the importance of BMP-2 in several developmental and physiological processes have raised the need to improve the design of materials by controlling BMP-2 presentation. Inspired by the natural cell environment, new material surfaces have been engineered and tailored to provide both physical and chemical cues that regulate BMP-2 activity. Here we describe surfaces designed to present BMP-2 to cells in a spatially and temporally controlled manner. This is achieved by trapping BMP-2 using physicochemical interactions, either covalently grafted or combined with other extracellular matrix components. In the near future, we anticipate that material science and biology will integrate and further develop tools for in vitro studies and potentially bring some of them toward in vivo applications.

Nanomechanics controls neuronal precursors adhesion and differentiation

The ability to control the differentiation of stem cells into specific neuronal types has a tremendous potential for the treatment of neurodegenerative diseases. In vitro neuronal differentiation can be guided by the interplay of biochemical and biophysical cues. Different strategies to increase the differentiation yield have been proposed, focusing everything on substrate topography, or, alternatively on substrate stiffness. Both strategies demonstrated an improvement of the cellular response. However it was often impossible to separate the topographical and the mechanical contributions. Here we investigate the role of the mechanical properties of nanostructured substrates, aiming at understanding the ultimate parameters which govern the stem cell differentiation. To this purpose a set of different substrates with controlled stiffness and with or without nanopatterning are used for stem cell differentiation. Our results show that the neuronal differentiation yield depends mainly on the substrate mechanical properties while the geometry plays a minor role. In particular nanostructured and flat polydimethylsiloxane (PDMS) substrates with comparable stiffness show the same neuronal yield. The improvement in the differentiation yield obtained through surface nanopatterning in the submicrometer scale could be explained as a consequence of a substrate softening effect. Finally we investigate by single cell force spectroscopy the neuronal precursor adhesion on the substrate immediately after seeding, as a possible critical step governing the neuronal differentiation efficiency. We observed that neuronal precursor adhesion depends on substrate stiffness but not on surface structure, and in particular it is higher on softer substrates. Our results suggest that cell–substrate adhesion forces and mechanical response are the key parameters to be considered for substrate design in neuronal regenerative medicine. Biotechnol. Bioeng. 2013; 110: 2301–2310.

Differential structural remodelling of heparan sulfate by chemokines: the role of chemokine oligomerization

Chemokines control the migration of cells in normal physiological processes and in the context of disease such as inflammation, autoimmunity and cancer. Two major interactions are involved: (i) binding of chemokines to chemokine receptors, which activates the cellular machinery required for movement; and (ii) binding of chemokines to glycosaminoglycans (GAGs), which facilitates the organization of chemokines into haptotactic gradients that direct cell movement. Chemokines can bind and activate their receptors as monomers; however, the ability to oligomerize is critical for the function of many chemokines in vivo. Chemokine oligomerization is thought to enhance their affinity for GAGs, and here we show that it significantly affects the ability of chemokines to accumulate on and be retained by heparan sulfate (HS). We also demonstrate that several chemokines differentially rigidify and cross-link HS, thereby affecting HS rigidity and mobility, and that HS cross-linking is significantly enhanced by chemokine oligomerization. These findings suggest that chemokine–GAG interactions may play more diverse biological roles than the traditional paradigms of physical immobilization and establishment of chemokine gradients; we hypothesize that they may promote receptor-independent events such as physical re-organization of the endothelial glycocalyx and extracellular matrix, as well as signalling through proteoglycans to facilitate leukocyte adhesion and transmigration.

Fragmentation as a mechanism for growth cone pruning and degeneration.

During early development of the central nervous system, there is an excessive outgrowth of neuronal projections, which later need to be refined to achieve precise connectivity. Axon pruning and degeneration are strategies used to remove exuberant neurites and connections in the immature nervous system to ensure the proper formation of functional circuitry. To observe morphological changes and physical mechanisms underlying this process, early differentiating embryonic stem cell-derived neurons were used combining video imaging of live growth cones (GCs) with confocal laser scanning microscopy and atomic force microscopy, both on fixed and living neurons. Using this method, we could highlight the presence of submicrometric fragments in still and in some of the retracting GCs. The observed fragmentation is not an artifact of atomic force microscopy scanning or fixation, or the result of apoptosis. Therefore, the morphology of GCs depends on their overall motility, and fragmentation seems to be the fate of GCs that have not found a correct destination.

Binding of the chemokine CXCL12α to its natural extracellular matrix ligand heparan sulfate enables myoblast adhesion and facilitates cell motility

The chemokine CXCL12α is a potent chemoattractant that guides the migration of muscle precursor cells (myoblasts) during myogenesis and muscle regeneration. To study how the molecular presentation of chemokines influences myoblast adhesion and motility, we designed multifunctional biomimetic surfaces as a tuneable signalling platform that enabled the response of myoblasts to selected extracellular cues to be studied in a well-defined environment. Using this platform, we demonstrate that CXCL12α, when presented by its natural extracellular matrix ligand heparan sulfate (HS), enables the adhesion and spreading of myoblasts and facilitates their active migration. In contrast, myoblasts also adhered and spread on CXCL12α that was quasi-irreversibly surface-bound in the absence of HS, but were essentially immotile. Moreover, co-presentation of the cyclic RGD peptide as integrin ligand along with HS-bound CXCL12α led to enhanced spreading and motility, in a way that indicates cooperation between CXCR4 (the CXCL12α receptor) and integrins (the RGD receptors). Our findings reveal the critical role of HS in CXCL12α induced myoblast adhesion and migration. The biomimetic surfaces developed here hold promise for mechanistic studies of cellular responses to different presentations of biomolecules. They may be broadly applicable for dissecting the signalling pathways underlying receptor cross-talks, and thus may guide the development of novel biomaterials that promote highly specific cellular responses.

Can hippocampal neurites and growth cones climb over obstacles

Guidance molecules, such as Sema3A or Netrin-1, can induce growth cone (GC) repulsion or attraction in the presence of a flat surface, but very little is known of the action of guidance molecules in the presence of obstacles. Therefore we combined chemical and mechanical cues by applying a steady Netrin-1 stream to the GCs of dissociated hippocampal neurons plated on polydimethylsiloxane (PDMS) surfaces patterned with lines 2 µm wide, with 4 µm period and with a height varying from 100 to 600 nm. GC turning experiments performed 24 hours after plating showed that filopodia crawl over these lines within minutes. These filopodia do not show staining for the adhesion marker Paxillin. GCs and neurites crawl over lines 100 nm high, but less frequently and on a longer time scale over lines higher than 300 nm; neurites never crawl over lines 600 nm high. When neurons are grown for 3 days over patterned surfaces, also neurites can cross lines 300 nm and 600 nm high, grow parallel to and on top of these lines and express Paxillin. Axons - selectively stained with SMI 312 – do not differ from dendrites in their ability to cross these lines. Our results show that highly motile structures such as filopodia climb over high obstacle in response to chemical cues, but larger neuronal structures are less prompt and require hours or days to climb similar obstacles.

Enhanced biological activity of BMP-2 bound to surface-grafted heparan sulfate

Over the last decade, there has been a growing interest in the development of new materials to improve bone morphogenetic protein‐2 (BMP‐2) delivery for tissue regeneration. This study reports the development and application of model surfaces that present BMP‐2 via heparan sulfate (HS), a ubiquitous component of the extracellular matrix (ECM). On these surfaces, HS is grafted by its reducing end, to mimic the natural arrangement of HS proteoglycans in the ECM. The binding of each component on these biomimetic surfaces is highly controlled, in terms of stoichiometry of molecules and BMP‐2/grafted‐HS affinity, as determined by surface‐sensitive techniques. For comparison, this study also uses surfaces presenting immobilized BMP‐2 alone. Functional validations of the surfaces are performed using a murine myoblast cell line (C2C12) and primary human mesenchymal stromal cells. In both cell types, HS‐bound BMP‐2 and surface‐immobilized BMP‐2 significantly prolong SMAD 1/5 phosphorylation, compared to BMP‐2 added to the culture media. Moreover, HS‐bound BMP‐2 enhances p‐SMAD 1/5 levels in C2C12 cells and reduces noggin antagonistic activity. Thus, grafted HS positively affects BMP‐2 cellular activity. This innovative surface design, which mimics natural interactions of growth factors with ECM components, constitutes a promising candidate for future regenerative medicine applications.