Elisa Riedo

Nanoscale Tunable Reduction of Graphene Oxide for Graphene Electronics

Writing Conductive Lines with Hot Tips The interface within devices between conductors, semiconductors, and insulators is usually created by stacking patterned layers of different materials. For flexible electronics, it can be advantageous to avoid this architectural constraint. Graphene oxide, formed by chemical exfoliation of graphite, can be reduced to a more conductive form using chemical reductants. Wei et al. (p. 1373) now show that layers of graphene oxide can also be reduced using a hot atomic force microscope tip to create materials comparable to those of organic conductors. This process can create patterned regions (down to 12 nanometers in width) that differ in conductivity by up to four orders of magnitude. Conducting regions can be drawn on graphene oxide sheets with a heated atomic force microscope tip. The reduced form of graphene oxide (GO) is an attractive alternative to graphene for producing large-scale flexible conductors and for creating devices that require an electronic gap. We report on a means to tune the topographical and electrical properties of reduced GO (rGO) with nanoscopic resolution by local thermal reduction of GO with a heated atomic force microscope tip. The rGO regions are up to four orders of magnitude more conductive than pristine GO. No sign of tip wear or sample tearing was observed. Variably conductive nanoribbons with dimensions down to 12 nanometers could be produced in oxidized epitaxial graphene films in a single step that is clean, rapid, and reliable.

Room-temperature metastability of multilayer graphene oxide films.

Graphene oxide potentially has multiple applications. The chemistry of graphene oxide and its response to external stimuli such as temperature and light are not well understood and only approximately controlled. This understanding is crucial to enable future applications of this material. Here, a combined experimental and density functional theory study shows that multilayer graphene oxide produced by oxidizing epitaxial graphene through the Hummers method is a metastable material whose structure and chemistry evolve at room temperature with a characteristic relaxation time of about one month. At the quasi-equilibrium, graphene oxide reaches a nearly stable reduced O/C ratio, and exhibits a structure deprived of epoxide groups and enriched in hydroxyl groups. Our calculations show that the structural and chemical changes are driven by the availability of hydrogen in the oxidized graphitic sheets, which favours the reduction of epoxide groups and the formation of water molecules.

Advanced scanning probe lithography

The nanoscale control afforded by scanning probe microscopes has prompted the development of a wide variety of scanning-probe-based patterning methods. Some of these methods have demonstrated a high degree of robustness and patterning capabilities that are unmatched by other lithographic techniques. However, the limited throughput of scanning probe lithography has prevented its exploitation in technological applications. Here, we review the fundamentals of scanning probe lithography and its use in materials science and nanotechnology. We focus on robust methods, such as those based on thermal effects, chemical reactions and voltage-induced processes, that demonstrate a potential for applications.

Radial elasticity of multiwalled carbon nanotubes.

We report an experimental and a theoretical study of the radial elasticity of multiwalled carbon nanotubes as a function of external radius. We use atomic force microscopy and apply small indentation amplitudes in order to stay in the linear elasticity regime. The number of layers for a given tube radius is inferred from transmission electron microscopy, revealing constant ratios of external to internal radii. This enables a comparison with molecular dynamics results, which also shed some light onto the applicability of Hertz theory in this context. Using this theory, we find a radial Young modulus strongly decreasing with increasing radius and reaching an asymptotic value of 30+/-10 GPa.

The interplay between apparent viscosity and wettability in nanoconfined water

Understanding and manipulating fluids at the nanoscale is a matter of growing scientific and technological interest. Here we show that the viscous shear forces in nanoconfined water can be orders of magnitudes larger than in bulk water if the confining surfaces are hydrophilic, whereas they greatly decrease when the surfaces are increasingly hydrophobic. This decrease of viscous forces is quantitatively explained with a simple model that includes the slip velocity at the water surface interface. The same effect is observed in the energy dissipated by a tip vibrating in water perpendicularly to a surface. Comparison of the experimental data with the model shows that interfacial viscous forces and compressive dissipation in nanoconfined water can decrease up to two orders of magnitude due to slippage. These results offer a new understanding of interfacial fluids, which can be used to control flow at the nanoscale.

Nanotribology of carbon based thin films: the influence of film structure and surface morphology

The tribological behavior of carbon based thin films is strongly influenced by their chemical composition, polycrystalline structure and surface morphology. We present friction measurements on laser deposited amorphous carbon and carbon nitride (CNchi) thin films using atomic force microscopy. We studied the friction behavior of these films in relation with their structure and surface morphology resulting from the applied deposition parameters. We found high nanoscopic friction for amorphous carbon thin films, medium friction for CN chi and very low friction for graphite. Finally we discuss our findings in terms of the microscopic mechanisms of energy dissipation underlying the observed friction behavior

Invited Review Article: Combining scanning probe microscopy with optical spectroscopy for applications in biology and materials science

This is a comprehensive review of the combination of scanning probe microscopy (SPM) with various optical spectroscopies, with a particular focus on Raman spectroscopy. Efforts to combine SPM with optical spectroscopy will be described, and the technical difficulties encountered will be examined. These efforts have so far focused mainly on the development of tip-enhanced Raman spectroscopy, a powerful technique to detect and image chemical signatures with single molecule sensitivity, which will be reviewed. Beyond tip-enhanced Raman spectroscopy and/or topography measurements, combinations of SPM with optical spectroscopy have a great potential in the characterization of structure and quantitative measurements of physical properties, such as mechanical, optical, or electrical properties, in delicate biological samples and nanomaterials. The different approaches to improve the spatial resolution, the chemical sensitivity, and the accuracy of physical properties measurements will be discussed. Applications of such combinations for the characterization of structure, defects, and physical properties in biology and materials science will be reviewed. Due to the versatility of SPM probes for the manipulation and characterization of small and/or delicate samples, this review will mainly focus on the apertureless techniques based on SPM probes.

Composition and chemical bonding of pulsed laser deposited carbon nitride thin films

We studied composition, structure, and growth parameters of amorphous diamond-like carbon (DLC) and carbon nitride (CNx) films deposited by pulsed laser deposition in vacuum and in nitrogen atmosphere. The composition (0⩽N/C⩽0.4), the structural and the electronic properties of the deposited carbon and carbon nitride films were investigated for different laser fluences (1–12 J/cm2). Electron energy loss spectroscopy, x-ray photoelectron spectroscopy, and micro-Raman spectroscopy indicated an increase in sp3-bonded carbon sites in the DLC films and an increase in N-sp3 C bonded sites in the CNx films with increasing deposition laser fluence. Raman spectroscopy also showed the presence of a small amount of C≡N bonds in the CNx films. Furthermore, we observed that keeping the nitrogen pressure constant (P=100 mTorr) the increase in the deposition laser fluence is reflected by an increase in the nitrogen content in the films. All the results have been discussed in the framework of different theoretical models.

Nonlinear Viscoelastic Dynamics of Nanoconfined Wetting Liquids

The viscoelastic dynamics of nanoconfined wetting liquids is studied by means of atomic force microscopy. We observe a nonlinear viscoelastic behavior remarkably similar to that widely observed in metastable complex fluids. We show that the origin of the measured nonlinear viscoelasticity in nanoconfined water and silicon oil is a strain rate dependent relaxation time and slow dynamics. By measuring the viscoelastic modulus at different frequencies and strains, we find that the intrinsic relaxation time of nanoconfined water is in the range 0.1-0.0001 s, orders of magnitude longer than that of bulk water, and comparable to the dielectric relaxation time measured in supercooled water at 170-210 K.

Nanopatterning reconfigurable magnetic landscapes via thermally assisted scanning probe lithography

The search for novel tools to control magnetism at the nanoscale is crucial for the development of new paradigms in optics, electronics and spintronics. So far, the fabrication of magnetic nanostructures has been achieved mainly through irreversible structural or chemical modifications. Here, we propose a new concept for creating reconfigurable magnetic nanopatterns by crafting, at the nanoscale, the magnetic anisotropy landscape of a ferromagnetic layer exchange-coupled to an antiferromagnetic layer. By performing localized field cooling with the hot tip of a scanning probe microscope, magnetic structures, with arbitrarily oriented magnetization and tunable unidirectional anisotropy, are reversibly patterned without modifying the film chemistry and topography. This opens unforeseen possibilities for the development of novel metamaterials with finely tuned magnetic properties, such as reconfigurable magneto-plasmonic and magnonic crystals. In this context, we experimentally demonstrate spatially controlled spin wave excitation and propagation in magnetic structures patterned with the proposed method.