Elisa Sessini

A Family of Layered Chiral Porous Magnets Exhibiting Tunable Ordering Temperatures

A simple change of the substituents in the bridging ligand allows tuning of the ordering temperatures, Tc, in the new family of layered chiral magnets A[M(II)M(III)(X2An)3]·G (A = [(H3O)(phz)3](+) (phz = phenazine) or NBu4(+); X2An(2-) = C6O4X2(2-) = 2,5-dihydroxy-1,4-benzoquinone derivative dianion, with M(III) = Cr, Fe; M(II) = Mn, Fe, Co, etc.; X = Cl, Br, I, H; G = water or acetone). Depending on the nature of X, an increase in Tc from ca. 5.5 to 6.3, 8.2, and 11.0 K (for X = Cl, Br, I, and H, respectively) is observed in the MnCr derivative. Furthermore, the presence of the chiral cation [(H3O)(phz)3](+), formed by the association of a hydronium ion with three phenazine molecules, leads to a chiral structure where the Δ-[(H3O)(phz)3](+) cations are always located below the Δ-[Cr(Cl2An)3](3-) centers, leading to a very unusual localization of both kinds of metals (Cr and Mn) and to an eclipsed disposition of the layers. This eclipsed disposition generates hexagonal channels with a void volume of ca. 20% where guest molecules (acetone and water) can be reversibly absorbed. Here we present the structural and magnetic characterization of this new family of anilato-based molecular magnets.

Halogen-bonding in a new family of tris(haloanilato)metallate(III) magnetic molecular building blocks

Here we report on new tris(haloanilato)metallate(III) complexes with general formula [A]3[M(X2An)3] (A = (n-Bu)4N(+), (Ph)4P(+); M = Cr(III), Fe(III); X2An = 3,6-dihalo derivatives of 2,5-dihydroxybenzoquinone (H4C6O4), chloranilate (Cl2An(2-)), bromanilate (Br2An(2-)) and iodanilate (I2An(2-))), obtained by a general synthetic strategy, and their full characterization. The crystal structures of these Fe(III) and Cr(III) haloanilate complexes consist of anions formed by homoleptic complexes formulated as [M(X2An)3](3-) and (Et)3NH(+), (n-Bu)4N(+), or (Ph4)P(+) cations. All complexes exhibit octahedral coordination geometry with metal ions surrounded by six oxygen atoms from three chelate ligands. These complexes are chiral according to the metal coordination of three bidentate ligands, and both Λ and Δ enantiomers are present in their crystal lattice. The packing of [(n-Bu)4N]3[Cr(I2An)3] (5a) shows that the complexes form supramolecular dimers that are held together by two symmetry related I···O interactions (3.092(8) Å), considerably shorter than the sum of iodine and oxygen van der Waals radii (3.50 Å). The I···O interaction can be regarded as a halogen bond (XB), where the iodine behaves as the XB donor and the oxygen atom as the XB acceptor. This is in agreement with the properties of the electrostatic potential for [Cr(I2An)3](3-) that predicts a negative charge accumulation on the peripheral oxygen atoms and a positive charge accumulation on the iodine. The magnetic behaviour of all complexes, except 5a, may be explained by considering a set of paramagnetic non-interacting Fe(III) or Cr(III) ions, taking into account the zero-field splitting effect. The presence of strong XB interactions in 5a are able, instead, to promote antiferromagnetic interactions among paramagnetic centers at low temperature, as shown by the fit with the Curie-Weiss law, in agreement with the formation of halogen-bonded supramolecular dimers.

Synthesis and physical properties of K 4[Fe(C5O5)2(H 2O)2](HC5O5) 24H2O (C5O5)2- = croconate): A rare example of ferromagnetic coupling via H-bonds

The reaction of the croconate dianion (C(5)O(5))(2-) with a Fe(III) salt has led, unexpectedly, to the formation of the first example of a discrete Fe(II)-croconate complex without additional coligands, K(4)[Fe(C(5)O(5))(2)(H(2)O)(2)](HC(5)O(5))(2)·4H(2)O (1). 1 crystallizes in the monoclinic P2(1)/c space group and presents discrete octahedral Fe(II) complexes coordinated by two chelating C(5)O(5)(2-) anions in the equatorial plane and two trans axial water molecules. The structure can be viewed as formed by alternating layers of trans-diaquabis(croconato)ferrate(II) complexes and layers containing the monoprotonated croconate anions, HC(5)O(5)(-), and noncoordinated water molecules. Both kinds of layers are directly connected through a hydrogen bond between an oxygen atom of the coordinated dianion and the protonated oxygen atom of the noncoordinated croconate monoanion. A H-bond network is also formed between the coordinated water molecule and one oxygen atom of the coordinated croconate. This H-bond can be classified as strong-moderate being the O···O bond distance (2.771(2) Å) typical of moderate H-bonds and the O-H···O bond angle (174(3)°) typical of strong ones. This H-bond interaction leads to a quadratic regular layer where each [Fe(C(5)O(5))(2)(H(2)O)(2)](2-) anion is connected to its four neighbors in the plane through four equivalent H-bonds. From the magnetic point of view, these connections lead to an S = 2 quadratic layer. The magnetic properties of 1 have been reproduced with a 2D square lattice model for S = 2 ions with g = 2.027(2) and J = 4.59(3) cm(-1). This model reproduces quite satisfactorily its magnetic properties but only above the maximum. A better fit is obtained by considering an additional antiferromagnetic weak interlayer coupling constant (j) through a molecular field approximation with g = 2.071(7), J = 2.94(7) cm(-1), and j = -0.045(2) cm(-1) (the Hamiltonian is written as H = -JS(i)S(j)). Although this second model might still be improved since there is also an extra contribution due to the presence of ZFS in the Fe(II) ions, it confirms the presence of weak ferromagnetic Fe-Fe interactions through H-bonds in compound 1 which represents one of the rare examples of ferromagnetic coupling via H-bonds.

Tailoring functionality through synthetic strategy in heterolanthanide assemblies

An overview of the different strategies proposed for the preparation of heterolanthanide assemblies suitable to work as (multi-) functional materials, highlighting their structure/property relationship, is provided. Three classes of compounds are selected: multi-dimensional coordination frameworks, polynuclear discrete molecules and flexible large molecules formed by two or more coordinating units connected by a linker. Synthetic approaches and potential functionalities are discussed on the basis of lanthanide ion discrimination and the structural arrangement of the heterometallic assembly.

New BDH-TTP/[M-III(C5O5)(3)](3-) (M = Fe, Ga) Isostructural Molecular Metals

Two new isostructural molecular metals-(BDH-TTP)(6)[M(III)(C(5)O(5))(3)]·CH(2)Cl(2) (BDH-TTP = 2,5-bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene, where M = Fe (1) and Ga (2))-have been prepared and fully characterized. Compound 1 is a molecular conductor showing paramagnetic behavior, which is due to the presence of isolated [Fe(C(5)O(5))(3)](3-) complexes with high-spin S = (5)/(2) Fe(III) metal ions. The conductivity originates from the BDH-TTP organic donors arranged in a κ-type molecular packing. At 4 kbar, compound 1 behaves as a metal down to ∼100 K, showing high conductivity (∼10 S cm(-1)) at room temperature. When applying a pressure higher than 7 kbar, the metal-insulator (M-I) transition is suppressed and the compound retains the metallic state down to low temperatures (2 K). For 1, ESR signals have been interpreted as being caused by the fine structure splitting of the high-spin (S = 5/2) state of Fe(III) in the distorted octahedral crystal field from the ligands. At 4 kbar, the isostructural compound 2 behaves as a metal down to ∼100 K, although it is noteworthy that the M-I transition is not suppressed, even at pressures of 15 kbar. For 2, only the signal assigned to delocalized π-electrons has been observed in the ESR measurements.