Elisabete A. Pereira

Laser-induced fluorescence and UV detection of derivatized aldehydes in air samples using capillary electrophoresis

In this work, two capillary zone electrophoresis methodologies using UV absorption detection (214 nm) and laser-induced fluorescence detection (He/Cd laser, 325 nm excitation, 520 nm emission) of selected aldehydes (formaldehyde, acetaldehyde, propionaldehyde and acrolein) derivatized with dansylhydrazine (DNSH, 5-dimethylaminonaphthalene-1-sulfohydrazide) were proposed and validated. The aldehydes react with DNSH to form negatively charged molecules in methanolic medium. In both methodologies, nine DNSH-derivatives, including isomers of acetaldehyde, propionaldehyde and acrolein and two impurities were baseline separated in 20 mmol l(-1) phosphate buffer at pH 7.02, in less than 9 min. The limits of detection for the UV and LIF methodologies ranged from 1.1-9.5 microg l(-1) and 0.29-5.3 microg l(-1), respectively. The applicability of both methodologies to contemplate real samples was confirmed in the analysis of aldehyde-DNSH derivatives in indoor and outdoor air samples.

Determination of 2‑Methylimidazole and 4‑Methylimidazole in Caramel Colors by Capillary Electrophoresis

The use of chemical preservative compounds is common in the food products industry. Caramel color is the most usual additive used in beverages, desserts, and breads worldwide. During its fabrication process, 2- and 4-methylimidazole (MeI), highly carcinogenic compounds, are generated. In these cases, the development of reliable analytical methods for the monitoring of undesirable compounds is necessary. The primary procedure for the analysis of 2- and 4-MeI is using LC- or GC-MS techniques. These procedures are time-consuming and require large amounts of organic solvents and several pretreatment steps. This prevents the routine use of this procedure. This paper describes a rapid, efficient, and simple method using capillary electrophoresis (CE) for the separation and determination of 2- and 4-MeI in caramel colors. The analyses were performed using a 75 μm i.d. uncoated fused-silica capillary with an effective length of 40 cm and a running electrolyte consisting of 160 mmol L(-1) phosphate plus 30% acetonitrile. The pH was adjusted to 2.5 with triethylamine. The analytes were separated within 6 min at a voltage of 20 kV. Method validation revealed good repeatability of both migration time (<0.8% RSD) and peak area (<2% RSD). Analytical curves for 2- and 4-MeI were linear in the 0.4-40 mg L(-1) concentration interval. Detection limits were 0.16 mg L(-1) for 4-MeI and 0.22 mg L(-1) for 2-MeI. The extraction recoveries were satisfactory. The developed method showed many advantages when compared to the previously used method.

Applications of capillary electrophoresis to the analysis of compounds of clinical, forensic, cosmetological, environmental, nutritional and pharmaceutical importance

Since its inception in the 80s, capillary electrophoresis has matured into a well-established separation technique, actually encompassing a family of electrodriven techniques with distinct separation mechanisms and selectivity, performed in a single capillary column. In this work, the versatility of capillary electrophoresis in handling materials from a diversity of chemical classes and complex sample matrices is illustrated by representative applications in the clinical, forensic, cosmetological, environmental, nutritional and pharmaceutical areas, grouping together our own research interests and results.

Avaliação de contaminantes inorgânicos e orgânicos em álcool combustível utilizando eletroforese capilar

This work reports the analysis of inorganic and organic contaminants in alcohol fuel samples using capillary electrophoresis. Chloride and sulfate were analyzed in nitrate/ monochloroacetic acid at 10 mmol L-1 concentration each under indirect UV detection (210 nm). The analysis of aldehydes is based on the 216 nm detection of 3-methyl-2-benzothiazoline hydrazone adducts. The running buffer consisted of 20 mmol L-1 tetraborate , 40 mmol L-1 sodium dodecyl sufate and 12 mmol L-1 b-ciclodextrin. Both methodologies were applied to real samples indicating inorganic ion concentrations from 0.15 to 6.64 mg kg-1 and aldehydes from 32.0 to 91.3 mg L-1.