Elisabete P. Carreiro

Development of a selective sorbent for the solid-phase extraction of terbuthylazine in olive oil samples: A molecular imprinting strategy

Aiming to implement an analytical methodology that is highly selective for the extraction and quantification of terbuthylazine from olive oil, we successfully achieved: (i) the development of a molecularly imprinted polymer by bulk polymerization using terbuthylazine as template molecule, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, and dichloromethane as porogen; (ii) characterization of the imprinting material using Fourier transform infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption at 77 K, and scanning electron microscopy; (iii) their molecular recognition for the template molecule using high-performance liquid chromatography, and (iv) optimization of a solid-phase extraction procedure using as sorbent the synthesized molecularly imprinted polymer for the selective extraction and clean-up of terbuthylazine from spiked organic olive oil and further quantification of the pesticide levels by high-performance liquid chromatography. The suitability of the implemented analytical methodology was demonstrated, as concentrations of terbuthylazine below the tolerated maximum residue limits in the spiked organic olive oil samples could be satisfactorily analyzed with good precision/accuracy with high recovery rates (96%). Overall, the implemented methodology has proven to be reliable and robust and is highly promising in the field of sample preparation, particularly for the isolation/preconcentration of terbuthylazine in complex food samples.

3-Hydroxypyrrolidine and (3,4)-dihydroxypyrrolidine derivatives: inhibition of rat intestinal α-glucosidase.

Thirteen pyrrolidine-based iminosugar derivatives have been synthesized and evaluated for inhibition of α-glucosidase from rat intestine. The compounds studied were the non-hydroxy, mono-hydroxy and dihydroxypyrrolidines. All the compounds were N-benzylated apart from one. Four of the compounds had a carbonyl group in the 2,5-position of the pyrrolidine ring. The most promising iminosugar was the trans-3,4-dihydroxypyrrolidine 5 giving an IC50 of 2.97±0.046 and a KI of 1.18 mM. Kinetic studies showed that the inhibition was of the mixed type, but predominantly competitive for all the compounds tested. Toxicological assay results showed that the compounds have low toxicity. Docking studies showed that all the compounds occupy the same region as the DNJ inhibitor on the enzyme binding site with the most active compounds establishing similar interactions with key residues. Our studies suggest that a rotation of ∼90° of some compounds inside the binding pocket is responsible for the complete loss of inhibitory activity. Despite the fact that activity was found only in the mM range, these compounds have served as simple molecular tools for probing the structural features of the enzyme, so that inhibition can be improved in further studies.

Dual-layer solid-phase extraction based on molecular imprinting technology: Seeking a route to enhance selectivity for trace analysis of pesticide residues in olive oil.

Aiming to introduce a multiresidue analysis for the trace detection of pesticide residues belonging to organophosphorus and triazine classes from olive oil samples, a new sample preparation methodology comprising the use of a dual layer of “tailor‐made” molecularly imprinted polymers (MIPs) SPE for the simultaneous extraction of both pesticides in a single procedure has been attempted. This work has focused on the implementation of a dual MIP‐layer SPE procedure (DL‐MISPE) encompassing the use of two MIP layers as specific sorbents. In order to achieve higher recovery rates, the amount of MIP layers has been optimized as well as the influence of MIP packaging order. The optimized DL‐MISPE approach has been used in the preconcentration of spiked organic olive oil samples with concentrations of dimethoate and terbuthylazine similar to the maximum residue limits and further quantification by HPLC. High recovery rates for dimethoate (95%) and terbuthylazine (94%) have been achieved with good accuracy and precision. Overall, this work constitutes the first attempt on the development of a dual pesticide residue methodology for the trace analysis of pesticide residues based on molecular imprinting technology. Thus, DL‐MISPE constitutes a reliable, robust, and sensitive sample preparation methodology that enables preconcentration of the target pesticides in complex olive oil samples, even at levels similar to the maximum residue limits enforced by the legislation.

A magnetic controllable tool for the selective enrichment of dimethoate from olive oil samples: A responsive molecular imprinting-based approach

Aiming to develop a straightforward magnetic-based sample preparation methodology for the selective extraction of dimethoate from olive oil, the synthesis of dimethoate-imprinted polymer on the surface of modified magnetic nanoparticles has been attempted. Molecular recognition assays have proven their suitability for the selective pre-concentration of dimethoate. Mechanistic basis for template selective recognition has been explored using a quantum chemical approach, providing new insights about the mechanisms underlying template recognition. Thus, a magnetic molecularly imprinted solid-phase extraction method was developed allowing the extraction of dimethoate from spiked olive oil samples, at levels similar to the maximum residue limits imposed by legislation, followed by the quantification of their levels by high-performance liquid chromatography with diode-array detection. Recoveries of 94.55% were obtained, with relative standard deviations lower than 0.53% (n = 3). The developed sample preparation technique enables a selective pre-concentration/enrichment of dimethoate from olive oil matrix with minimum handling and less solvent consumption.

Asymmetric Epoxidation and Sulfoxidation

Both epoxides and sulfoxides are important families of compounds, many of which are biologically active or have been applied in the synthesis of biologically active compounds. In many cases, in order to exert its biological activity, there is a requirement that the molecule be optically pure with a defined absolute configuration. Catalytic asymmetric epoxidation of olefins, and catalytic oxidation of sulfides with metal based catalysts are the current methods of choice to access such compounds in these states. This chapter focuses on these methods, in the homogenous phase. Key applications of these methods, particularly in the industrial context, are mentioned. The chapter is written in a systematic fashion, commencing with the epoxidation methods, and being divided up according to the principle metal involved. For both reaction processes, first the more well known catalytic procedures, with more common metal based catalysts (e.g., Titanium, Manganese, Vanadium, and Molybdenum etc) are considered, terminating with applications of less common or novel catalysts (like, those based on alkaline earth oxides, and lanthanoid based systems). The advantage of this method of categorization is that in the context of catalytic epoxidation it leads to a clean division between electrophilic and nucleophilic processes. Both the efficiency and selectivity of the oxidation event are discussed, in terms (generally) of reaction yield and enantioselectivity, as well as a careful discussion of the catalyst structure, synthesis and stability, not to mention a thorough review of the reaction mechanism and/or of the catalytic cycle. In many cases throughout this chapter these aspects are compared between different catalytic systems, highlighting the advantages and disadvantages of each method. Where appropriate, for aspects outside the remit of this chapter, the reader is referred to the most appropriate literature available.

A photoswitchable “host-guest” approach for the selective enrichment of dimethoate from olive oil

This work describes the development of a new selective photocontrollable molecularly imprinted-based sorbent for the selective enrichment/pre-concentration of dimethoate from spiked olive oil samples. To achieve this goal an improved molecularly imprinted strategy relying on the embedding of a functional monomer containing an azobenzene chromophore as light-responsive element, on the crosslinked tridimensional molecular imprinted network, has been assessed. To address the mechanisms underlying template recognition and uptake/release of the analyte from the functional imprinted material, computational studies using a quantum chemical approach, have been explored. This new functional sorbent provides a straightforward controllable uptake/release of the target template using light as the stimuli tool, which is highly advantageous due to light manipulation characteristics, such as superior clean, precision and remote controllable properties. In general, this work will contribute to the implementation of a photoswitchable analytical methodology that proves to be suitable for the selective isolation and further quantification of dimethoate from olive oil matrices at levels similar to the maximum residues limits imposed by the legislation. The limits of detection, calculated based on 3σ, was 1.6 mgL-1 and the limit of quantification, based on 10σ, was 5.2 mgL-1. The implemented sample preparation shows high reproducibility and recoveries (93.3 ± 0.4%).

Sequential alcohol oxidation/putative homo Claisen–Tishchenko-type reaction to give esters: a key process in accessing novel biologically active lactone macrocycles

We report an efficient methodology for the direct oxidative esterification of primary alcohols to diether-esters using pyridinium chlorochromate (PCC). Numerous studies were carried out to probe the reaction mechanism and at the same time optimize the reaction conditions. The reaction could be conducted with 1 equivalent of PCC and 1 equivalent of BF3·OEt2. Indications based on literature precedent were that the reaction may proceed via a sequential alcohol oxidation to the aldehyde followed by a putative Cr or boron catalyzed Claisen–Tishchenko-type reaction. Using this efficient methodology, we synthesized a family of novel diether-esters in very good yields; some of these molecules were subsequently tested against both acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE). In addition, we also disclose a new synthetic strategy for the synthesis of lactam macrocycles with potential biological activity. This methodology included the regioselective borylation of the ester substrate and a subsequent Suzuki–Miyaura coupling to obtain the desired lactam macrocycle.

Novel hydroxyamides and amides containing d-glucopyranose or d-fructose units: Biological assays in MCF-7 and MDST8 cell lines

A novel library of 15 compounds, hydroxyamides and amides containing a β-D-glucopyranose (D-Gluc) or a β-D-fructose (D-Fruc) units was designed and synthesized for antiproliferative assays in breast (MCF-7) and colon (MDST8) cancer cell lines. Twelve of them were hydroxyamides and were successfully synthesized from β-D-glucuronic acid (D-GluA). Six of these hydroxyamides which were acetylated hydroxy-β-D-glucopyranuronamide 2a-2f (1st Family) and the other six were their respective isomers, that is, hydroxy-β-D-fructuronamide 3a-3f (2nd Family), obtained by acid-base catalyzed isomerization. These compounds have the general structure, D-Gluc-C=ONH-CHR-(CH2)n-OH and D-Fruc-C=ONH-CHR-(CH2)n-OH, where R=an aromatic, alkyl or a hydrogen substituent, with n=0 or 1. Eight of these contained a chiral aminoalcohol group. Three compounds were amides containing a D-glucopyranose unit (3rd Family). SAR studies were conducted with these compounds. Antiproliferative studies showed that compound 4a, the bromo-amide containing the β-D-glucopyranose ring, potently inhibits the proliferation of the MDST8 cells. Five compounds (2e, 2f, 3d, 3e, and 3f) were shown to potently selectively inhibit the proliferation of the MCF-7 cells. Compound 4b was the only one showing inhibition in both cell lines. In general, the more active compounds were the amides and hydroxyamides containing the β-D-fructose moiety, and containing an alkyl group or hydrogen. Half-inhibitory concentrations (IC50) of between 0.01 and 10 μM, were observed.