Emanuele Magi

Distribution of polycyclic aromatic hydrocarbons in the sediments of the Adriatic Sea

Distribution of the sixteen polycyclic aromatic hydrocarbons (PAHs) indicated from USEPA as priority pollutants was studied in surface sediments of two coastal areas of the Adriatic Sea. PAHs were recovered from the sediments by solvent extraction and then analyzed by means of gas chromatography-mass spectrometry. Total concentrations of the analytes in the range 24.1-501.1 ng/g were detected. The observed distribution has been discussed taking into account different aspects, such as the fluvial inputs and the grain size of the sediments. By using a molecular marker approach and characteristic compositional patterns it was possible to ascribe to combustion processes the main source of PAHs. Furthermore a good correlation between benzo[a]pyrene and the total concentration of PAHs (r=0.953) has been pointed out.

Temporal distribution of trace metals in Antarctic coastal waters

Abstract In the framework of the Italian Research Programme in Antarctica, a nearshore station positioned inside the Gerlache Inlet (Terra Nova Bay, Western Ross Sea) was regularly sampled during the Austral Spring 1997/1998, from November to February. In order to evaluate the physical, chemical and biological variations along the water column, measurements of a large number of parameters were performed at a suitable frequency: temperature, salinity, fluorescence, suspended particulate matter, concentration of dissolved and particulate Fe, Cu and Mn, concentration of nutrients and phytoplankton pigments. Samples of pack ice and marine microlayer were also collected and analysed. Elaboration of data with regards to temporal and vertical components provided a good description of temporal distribution of trace metals in the coastal waters of Terra Nova Bay, in relation to the physical and biological processes. Concerning the surface layer, it was found that concentrations are mainly affected by the dynamic of the pack ice melting and phytoplankton activity. The first process influences both the input of metals from meltwaters and the covering of the seawater surface, allowing atmospheric dust input only when all ice has been melted or removed. Direct release from ice of particulate Fe and Cu were clearly shown by surface concentration peaks and by the high concentrations of suspended particulate matter and particulate metals detected in the ice core section interfaced with the seawater. Moreover, a quite complex dynamic dissolved/particulate partitioning was found, which can account for the temporal uncoupling between the maximum values of particulate and dissolved metals. In absence of pack ice, there is evidence of a further input of Fe and Mn due to atmospheric dust brought into the water column through the marine microlayer. This picture is complicated by phytoplankton activity, which removes micronutrients like Fe and Cu from water, incorporating them into organic particulate matter. The dynamic of metal uptake follows that of primary production which, in the studied area, shows a specific trend characterised by two distinct blooms: the first in the second half of December and the second in late summer. In intermediate and deep waters, the vertical distribution of Fe and Mn was characterised by a substantial constant profile until January; then, an increase of particulate metal concentration with depth was observed along with a corresponding decrease of the dissolved concentrations. This trend is typical of these scavenging-type elements which are removed by particulate matter during the sinking process, in the absence of well-defined water column stratification.

Combining passive samplers and biomonitors to evaluate endocrine disrupting compounds in a wastewater treatment plant by LC/MS/MS and bioassay analyses.

Two types of integrative sampling approaches (passive samplers and biomonitors) were tested for their sampling characteristics of selected endocrine disrupting compounds (EDCs). Chemical analyses (LC/MS/MS) were used to determine the amounts of five EDCs (nonylphenol, bisphenol A, estrone, 17beta-estradiol and 17alpha-ethinylestradiol) in polar organic chemical integrative samplers (POCIS) and freshwater mussels (Unio pictorum); both had been deployed in the influent and effluent of a municipal wastewater treatment plant (WWTP) in Genoa, Italy. Estrogenicity of the POCIS samples was assessed using the yeast estrogen screen (YES). Estradiol equivalent values derived from the bioassay showed a positive correlation with estradiol equivalents calculated from chemical analyses data. As expected, the amount of estrogens and EEQ values in the effluent were lower than those in the influent. Passive sampling proved to be the preferred method for assessing the presence of these compounds since employing mussels had several disadvantages both in sampling efficiency and sample analyses.

Rapid and selective determination of UV filters in seawater by liquid chromatography-tandem mass spectrometry combined with stir bar sorptive extraction.

Fast liquid chromatography coupled to triple-quadrupole tandem mass spectrometry was employed for the determination of six UV filters in seawater. The separation of the analytes was achieved in less than 5 min; polarity switching was used as four of the analytes were ionized in positive mode and the remaining two in negative mode. Two ionization sources were employed and compared: atmospheric pressure chemical ionization (APCI) gave better results than electrospray ionization (ESI) for all analytes, with higher reproducibility and lower detection limits. Therefore APCI was chosen for the determination of the analytes in seawater samples using stir bar sorptive extraction-liquid desorption (SBSE-LD). Quantitative analysis was performed in multiple reaction monitoring (MRM) mode; fragmentation pathways of the analytes with regard to the formation of the MRM ions were also proposed. For the analysis of seawater samples, calibration curves were drawn using SBSE in spiked seawater. All figures of merit of the method were satisfactory; limits of detection were particularly low for the four analytes ionized in positive mode, being in the range 8-31 ng/L. The method was applied to the determination of the six UV filters in seawater samples from Liguria, Italy. Only benzophenone-3 (BP-3) and ethylhexyl methoxycinnamate (EHMC) were measured in the analyzed samples; some of the remaining analytes were also detected but always below the limit of quantitation.

Emerging pollutants in aquatic environments: monitoring of UV filters in urban wastewater treatment plants

Six UV filters – benzophenone-3 (BP-3), octocrylene (OC), ethylhexyl dimethyl p-aminobenzoate (OD-PABA), ethylhexyl methoxycinnamate (EHMC), ethylhexyl salicylate (EHS) and homosalate (HMS) – with endocrine disrupting potential were monitored in different wastewater treatment plants (WWTPs) located in Genoa, Italy. The influent and effluent samples were collected once a month from April to September 2011. The analytes were determined by stir bar sorptive extraction followed by liquid desorption (SBSE-LD) combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Quantitative analysis was performed in triggered MRM (tMRM), which allowed improvement of specificity without compromising sensitivity. In the inlet samples four analytes were detected; in particular BP-3, OC, EHMC, and OD-PABA were in the range of 4–163, 12–390, 23–68, and 2–4 ng L−1, respectively. Measured concentrations indicated variability of UV filter inputs to WWTPs, with higher loads during the warmer months. A highly positive correlation was found between air temperature and the measured concentration of OC and BP-3. Only BP-3 and OC were detected in some effluent samples, with considerably lower concentrations. The removal efficiencies of the plants were in the range of 64 to >99% and 94 to >99% for BP-3 and OC, respectively.

Selection of internal standards in inductively coupled plasma atomic emission spectrometry by principal component analysis

A systematic procedure for the selection of optimal internal standards in ICP-OES has been developed. According to the procedure, a preliminary set of measurements is performed before analysis and processing by principal component analysis. The result is a plot (score plot) in which the emission lines of analytes and potential internal standards are grouped according to their empirical behaviour with respect to the considered matrix. The analysis of the score plot makes it possible to choose the optimal reference line, for each analytical line or group of analytical lines. In order to verify the efficiency of the method, trace element determination in marine sediments was considered and the procedure applied to compensate for the matrix effects due to large amounts of iron, aluminium, calcium, sodium and potassium. A robust axially viewed ICP with multichannel detection based on a coupled charge device was used in order to provide real-time internal standardization and to permit the simultaneous measurement of several emission lines. By the analyses of both synthetic and real samples, it was verified that the proposed procedure is suitable for choosing the optimal reference lines, allowing the full effectiveness of the internal standard method.

Determination of polychlorinated biphenyls in fish: Optimisation and validation of a method based on accelerated solvent extraction and gas chromatography–mass spectrometry

A simple and robust method for the determination of 18 polychlorinated biphenyls (PCBs) in fish was developed and validated. A mixture of acetone/n-hexane (1:1, v/v) was selected for accelerated solvent extraction (ASE). After the digestion of fat, the clean-up was carried out using solid phase extraction silica cartridges. Samples were analysed by GC-MS in selected ion monitoring (SIM) using three fragment ions for each congener (one quantifier and two qualifiers). PCB 155 and PCB 198 were employed as internal standards. The lowest limit of detection was observed for PCB 28 (0.4ng/g lipid weight). The accuracy of the method was verified by means of the Certified Reference Material EDF-2525 and good results in terms of linearity (R(2)>0.994) and recoveries (80-110%) were also achieved. Precision was evaluated by spiking blank samples at 4, 8 and 12ng/g. Relative standard deviation values for repeatability and reproducibility were lower than 8% and 16%, respectively. The method was applied to the determination of PCBs in 80 samples belonging to four Mediterranean fish species. The proposed procedure is particularly effective because it provides good recoveries with lowered extraction time and solvent consumption; in fact, the total time of extraction is about 12min per sample and, for the clean-up step, a total solvent volume of 13ml is required.

Interdisciplinary study for the evaluation of biochemical alterations on mussel Mytilus galloprovincialis exposed to a tributyltin-polluted area

An interdisciplinary approach was employed to monitor the concentration and the effects of butyltin compounds in mussels (Mytilus galloprovincialis). Tissues from animals exposed to a marine area (Vado Ligure harbour) with a high concentration of tributyltin (TBT) were analysed and compared with control samples. TBT concentrations were measured by gas chromatography–mass spectrometry and the protein pattern in gill tissues was studied by proteomic analysis. Several proteomic signatures associated with contaminant exposure were observed; spots that were significantly increased in all contaminated samples were identified by mass spectrometry as fragments of β-tubulin. The degradation of β-tubulin was then confirmed by western blot analysis with specific anti-β-tubulin antibody. The effects observed on mussel gills after exposure in the TBT-polluted area are discussed.

Determination of endocrine-disrupting compounds in drinking waters by fast liquid chromatography-tandem mass spectrometry.

Growing attention has been recently paid to safety of food and drinking water, making necessary the adoption of policies for water sources protection and the development of sensitive and rapid analytical methods to identify micropollutants. Endocrine-disrupting compounds (EDCs) have emerged as a major issue as they alter the functioning of the endocrine system. Since ingestion of EDCs via food is considered the major exposure route, there is a growing interest in understanding EDC fate during drinking water treatment and in monitoring potential contamination of surface waters and groundwaters. In this work, a fast liquid chromatography-electrospray ionization-tandem mass spectrometry method was developed for the determination of 4-n-nonylphenol (NP), bisphenol A (BPA), estrone (E1), 17β-estradiol (E2) and 17α-ethinylestradiol (EE2) in drinking waters. In the literature analytical articles seldom provide details regarding fragmentation pathways. In this paper spectra of the five EDCs in negative ESI were interpreted with the support of accurate mass spectra acquired by a quadrupole time-of-flight instrument; fragmentation pathways were also proposed. The chromatographic separation of EDCs was optimized on a Pinnacle DB Biphenylic column with a water-acetonitrile gradient. Quantitative analysis was performed in multiple reaction monitoring (MRM) mode using bisphenol A-d(16) (BPA-d(16)) as internal standard; calibration curves showed good correlation coefficients (0.9989-0.9997). All figures of merit of the method were satisfactory; limits of detection were in the range 0.2-0.4 ng/ml. The method was applied to the determination of the analytes in waters sampled by polar organic chemical integrative samplers in a drinking water treatment plant. Rather low concentration of BPA, NP and E1 were measured in the inlet, while none of the considered EDCs was detected in the outlet.

Effects of Ice Melting on Cu, Cd and Pb Profiles in Ross Sea Waters (Antarctica)

Abstract In the framework of the Italian Research Programme in Antarctica, evolution of dissolved and particulate Cu, Cd and Pb profiles in the coastal waters of Gerlache Inlet (Terra Nova Bay, Western Ross Sea) was studied during the Austral Summer 1997/98. In order to relate the distributions of trace metals with the physical and biological processes, a series of temperature and salinity measures were made, and water samples were collected to determine nutrients and chlorophyll. Samples of pack ice and marine microlayer (50–150 μm) were also collected and analysed. Concerning the surface layer, it was found that metal concentrations are mainly affected by the dynamic of the pack ice melting and phytoplankton activity. The first process influences both the input of metals from meltwaters and the covering of the seawater surface, allowing atmospheric dust input only when all ice has been melt or removed. Direct release of particulate Cu from ice was clearly shown by surface maxima and by the high concentrations of suspended particulate matter and particulate metals found in the ice core section interfaced with the seawater. Differently, the high amount of Cd in the particulate included in the pack ice seems not to affect the concentration in surface particulate; on the contrary, the corresponding increase of dissolved Cd indicates that it isreleased in dissolved form when the pack ice melts. Surface distribution is further complicated by the effect of phytoplankton activity, which removes Cu and Cd from water, incorporating them into organic particulate. Finally, in absence of pack ice, there is evidence of inputs of Pb and Cu due to atmospheric dust brought into the column water through marine microlayer. In intermediate and deep waters, the vertical distribution of Pb and Cd was characterised by substantially constant profiles, while Cu shown, during the end of the summer and in absence of a well-defined water column stratification, a “scavenging-type” distribution which overlaps its “nutrient-type” behaviour.