Emanuele Treossi

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

High-Contrast Visualization of Graphene Oxide on Dye-Sensitized Glass, Quartz, and Silicon by Fluorescence Quenching

We present a novel approach for detecting and visualizing graphene oxide (GO) with high contrast on different substrates, including glass, quartz, and silicon. Visualization of GO sheets is accomplished through quenching the fluorescence of a thiophene dye, giving high optical contrast without the need to use interference methods. A comparison of fluorescence, AFM, and XRD measurements confirmed that even a single GO sheet can completely quench the fluorescence and thus be quickly visualized.

Local Current Mapping and Patterning of Reduced Graphene Oxide

Conductive atomic force microscopy (C-AFM) has been used to correlate the detailed structural and electrical characteristics of graphene derived from graphene oxide. Uniform large currents were measured over areas exceeding tens of micrometers in few-layer films, supporting the use of graphene as a transparent electrode material. Moreover, defects such as electrical discontinuities were easily detected. Multilayer films were found to have a higher conductivity per layer than single layers. It is also shown that a local AFM-tip-induced electrochemical reduction process can be used to pattern conductive pathways on otherwise-insulating graphene oxide. Transistors with micrometer-scale tip-reduced graphene channels that featured ambipolar transport and an 8 order of magnitude increase in current density upon reduction were successfully fabricated.

Charge transport in graphene–polythiophene blends as studied by Kelvin Probe Force Microscopy and transistor characterization

Blends of reduced graphene oxide (RGO) and poly(3-hexylthiophene) (P3HT) are used as the active layer of field-effect transistors (FETs). By using sequential deposition of the two components, the density of RGO sheets can be tuned linearly, thereby modulating their contribution to the charge transport in the transistors, and the onset of charge percolation. The surface potential of RGO, P3HT and source–drain contacts is measured on the nanometric scale with Kelvin Probe Force Microscopy (KPFM), and correlated with the macroscopic performance of the FETs. KPFM is also used to monitor the potential decay along the channel in the working FETs.

Evidencing the mask effect of graphene oxide: a comparative study on primary human and murine phagocytic cells

Graphene oxide (GO) is attracting an ever-growing interest in different fields and applications. Not much is known about the possible impact of GO sheet lateral dimensions on their effects in vitro, especially on human primary cells. In an attempt to address this issue, we present a study to evaluate, how highly soluble 2-dimensional GO constituted of large or small flakes affects human monocyte derived macrophages (hMDM). For this purpose, the lateral size of GO was tuned using sonication and three samples were obtained. The non sonicated one presented large flakes (~1.32 μm) while sonication for 2 and 26 hours generated small (~0.27 μm) and very small (~0.13 μm) sheets of GO, respectively. Cell studies were then conducted to evaluate the cytotoxicity, the oxidative stress induction, the activation potential and the pro-inflammatory effects of these different types of GO at increasing concentrations. In comparison, the same experiments were run on murine intraperitoneal macrophages (mIPM). The interaction between GO and cells was further examined by TEM and Raman spectroscopy. Our data revealed that the GO sheet size had a significant impact on different cellular parameters (i.e. cellular viability, ROS generation, and cellular activation). Indeed, the more the lateral dimensions of GO were reduced, the higher were the cellular internalization and the effects on cellular functionality. Our data also revealed a particular interaction of GO flakes with the cellular membrane. In fact, a GO mask due to the parallel arrangement of the graphene sheets on the cellular surface was observed. Considering the mask effect, we have hypothesized that this particular contact between GO sheets and the cell membrane could either promote their internalization or isolate cells from their environment, thus possibly accounting for the following impact on cellular parameters.

Dispersibility‐Dependent Biodegradation of Graphene Oxide by Myeloperoxidase

Understanding human health risk associated with the rapidly emerging graphene-based nanomaterials represents a great challenge because of the diversity of applications and the wide range of possible ways of exposure to this type of materials. Herein, the biodegradation of graphene oxide (GO) sheets is reported by using myeloperoxidase (hMPO) derived from human neutrophils in the presence of a low concentration of hydrogen peroxide. The degradation capability of the enzyme on three different GO samples containing different degree of oxidation on their graphenic lattice, leading to a variable dispersibility in aqueous media is compared. hMPO fails in degrading the most aggregated GO, but succeeds to completely metabolize highly dispersed GO samples. The spectroscopy and microscopy analyses provide unambiguous evidence for the key roles played by hydrophilicity, negative surface charge, and colloidal stability of the aqueous GO in their biodegradation by hMPO catalysis.

Large Work Function Shift of Gold Induced by a Novel Perfluorinated Azobenzene-Based Self-Assembled Monolayer

Tune it with light! Self-assembled monolayers on gold based on a chemisorbed novel azobenzene derivative with a perfluorinated terminal phenyl ring are prepared. The modified substrate shows a significant work function increase compared to the bare metal. The photo-conversion between trans and cis isomers chemisorbed on the surface shows great perspectives for being an accessible route to tune the gold properties by means of light.

Temperature-Enhanced Solvent Vapor Annealing of a C-3 Symmetric Hexa-peri-Hexabenzocoronene: Controlling the Self-Assembly from Nano- to Macroscale

Temperature-enhanced solvent vapor annealing (TESVA) is used to self-assemble functionalized polycyclic aromatic hydrocarbon molecules into ordered macroscopic layers and crystals on solid surfaces. A novel C3 symmetric hexa-peri-hexabenzocoronene functionalized with alternating hydrophilic and hydrophobic side chains is used as a model system since its multivalent character can be expected to offer unique self-assembly properties and behavior in different solvents. TESVA promotes the molecules long-range mobility, as proven by their diffusion on a Si/SiO(x) surface on a scale of hundreds of micrometers. This leads to self-assembly into large, ordered crystals featuring an edge-on columnar type of arrangement, which differs from the morphologies obtained using conventional solution-processing methods such as spin-coating or drop-casting. The temperature modulation in the TESVA makes it possible to achieve an additional control over the role of hydrodynamic forces in the self-assembly at surfaces, leading to a macroscopic self-healing within the adsorbed film notably improved as compared to conventional solvent vapor annealing. This surface re-organization can be monitored in real time by optical and atomic force microscopy.

Solvent vapour annealing of organic thin films: controlling the self-assembly of functional systems across multiple length scales

Solvent vapour annealing allows macroscopic healing of molecular assemblies at surfaces to form suprastructures featuring a higher degree of order, and significant improvement of the performance of organic electronic devices.

The relationship between nanoscale architecture and charge transport in conjugated nanocrystals bridged by multichromophoric polymers

We report on the self-assembly and the electrical characterization of bicomponent films consisting of an organic semiconducting small molecule blended with a rigid polymeric scaffold functionalized in the side chains with monomeric units of the same molecule. The molecule and polymer are a perylene-bis(dicarboximide) monomer (M-PDI) and a perylene-bis(dicarboximide)-functionalized poly(isocyanopeptide) (P-PDI), which have been codeposited on SiO(x) and mica substrates from solution. These bicomponent films have been characterized by atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM), revealing the relationship between architecture and function for various supramolecular nanocrystalline arrangements at a nanometer spatial resolution. Monomer-polymer interactions can be controlled by varying solvent and/or substrate polarity, so that either the monomer packing dictates the polymer morphology or vice versa, leading to a morphology exhibiting M-PDI nanocrystals connected with each other by P-PDI polymer wires. Compared to pure M-PDI or P-PDI films, those bicomponent films that possess polymer interconnections between crystallites of the monomer display a significant improvement in electrical connectivity and a 2 orders of magnitude increase in charge carrier mobility within the film, as measured in thin film transistor (TFT) devices. Of a more fundamental interest, our technique allows the bridging of semiconducting crystals, without the formation of injection barriers at the connection points.