Emil B. Lobkovsky

A Luminescent Microporous Metal-Organic Framework for the Recognition and Sensing of Anions

A luminescent microporous metal-organic framework Tb(BTC)G has been developed for the recognition and sensing of anions, exhibiting a high-sensitivity sensing function with respect to fluoride.

Hydrogenation and cleavage of dinitrogen to ammonia with a zirconium complex.

Molecular nitrogen is relatively inert owing to the strength of its triple bond, nonpolarity and high ionization potential. As a result, the fixation of atmospheric nitrogen to ammonia under mild conditions has remained a challenge to chemists for more than a century. Although the Haber–Bosch process produces over 100 million tons of ammonia annually for the chemical industry and agriculture, it requires high temperature and pressure, in addition to a catalyst, to induce the combination of hydrogen (H2) and nitrogen (N2). Coordination of molecular nitrogen to transition metal complexes can activate and even rupture the strong N–N bond under mild conditions, with protonation yielding ammonia in stoichiometric and even catalytic yields. But the assembly of N–H bonds directly from H2 and N2 remains challenging: adding H2 to a metal–N2 complex results in the formation of N2 and metal–hydrogen bonds or, in the case of one zirconium complex, in formation of one N–H bond and a bridging hydride. Here we extend our work on zirconium complexes containing cyclopentadienyl ligands and show that adjustment of the ligands allows direct observation of N–H bond formation from N2 and H2. Subsequent warming of the complex cleaves the N–N bond at 45 °C, and continued hydrogenation at 85 °C results in complete fixation to ammonia.

Phosphonium-Functionalized Polyethylene: A New Class of Base-Stable Alkaline Anion Exchange Membranes

A tetrakis(dialkylamino)phosphonium cation was evaluated as a functional group for alkaline anion exchange membranes (AAEMs). The base stability of [P(N(Me)Cy)(4)](+) was directly compared to that of [BnNMe(3)](+) in 1 M NaOD/CD(3)OD. The high base stability of [P(N(Me)Cy)(4)](+) relative to [BnNMe(3)](+) inspired the preparation of AAEM materials composed of phosphonium units attached to polyethylene. The AAEMs (hydroxide conductivity of 22 ± 1 mS cm(-1) at 22 °C) were prepared using ring-opening metathesis polymerization, and their stabilities were evaluated in 15 M KOH at 22 °C and in 1 M KOH at 80 °C.

A Ring-Opening Metathesis Polymerization Route to Alkaline Anion Exchange Membranes: Development of Hydroxide-Conducting Thin Films from an Ammonium-Functionalized Monomer

We report the development of a facile ring-opening olefin metathesis route to alkaline anion exchange membranes via the copolymerization of a tetraalkylammonium-functionalized norbornene with dicyclopentadiene. The thin films generated are mechanically strong and exhibit high hydroxide conductivities and exceptional methanol tolerance.

Bis(imino)pyridine iron complexes for aldehyde and ketone hydrosilylation.

Bis(imino)pyridine iron dinitrogen and dialkyl complexes are well-defined precatalysts for the chemo- and regioselective reduction of aldehydes and ketones. Efficient carbonyl hydrosilylation is observed at low (0.1-1.0 mol %) catalyst loadings and with 2 equiv of either PhSiH(3) or Ph(2)SiH(2), representing one of the most active iron-catalyzed carbonyl reductions reported to date.

Influence of Perfluoroarene–Arene Interactions on the Phase Behavior of Liquid Crystalline and Polymeric Materials

A stabilization of the liquid-crystalline mesophase and thus an enlarged temperature range of the mesogenic phase is achieved by adding perfluorotriphenylene to a chiral liquid-crystalline triphenylene. This mesophase is based on 1:1 perfluoroarene-arene interactions (see picture). In a polymer with triphenylenes as mesogens in the side chains, the addition of perfluorotriphenylene led to crystallization.

Synthesis and Molecular and Electronic Structures of Reduced Bis(imino)pyridine Cobalt Dinitrogen Complexes: Ligand versus Metal Reduction

Sodium amalgam reduction of the aryl-substituted bis(imino)pyridine cobalt dihalide complexes ((Ar)PDI)CoCl(2) and ((iPr)BPDI)CoCl(2) ((Ar)PDI = 2,6-(2,6-R(2)-C(6)H(3)N=CMe)(2)C(5)H(3)N (R = (i)Pr, Et, Me); (iPr)BPDI = 2,6-(2,6-(i)Pr(2)-C(6)H(3)N=CPh)(2)C(5)H(3)N) in the presence of an N(2) atmosphere furnished the corresponding neutral cobalt dinitrogen complexes ((Ar)PDI)CoN(2) and ((iPr)BPDI)CoN(2). Magnetic measurements on these compounds establish doublet ground states. Two examples, ((iPr)PDI)CoN(2) and ((iPr)BPDI)CoN(2), were characterized by X-ray diffraction and exhibit metrical parameters consistent with one-electron chelate reduction and a Co(I) oxidation state. Accordingly, the toluene solution EPR spectrum of ((iPr)PDI)CoN(2) at 23 degrees C exhibits an isotropic signal with a g value of 2.003 and hyperfine coupling constant of 8 x 10(-4) cm(-1) to the I = 7/2 (59)Co center, suggesting a principally bis(imino)pyridine-based SOMO. Additional one-electron reduction of ((iPr)PDI)CoN(2) was accomplished by treatment with Na[C(10)H(8)] in THF and yielded the cobalt dinitrogen anion [((iPr)PDI)CoN(2)](-). DFT calculations on the series of cationic, neutral, and anionic bis(imino)pyridine cobalt dinitrogen compounds establish Co(I) centers in each case and a chelate-centered reduction in each of the sequential one-electron reduction steps. Frequency calculations successfully reproduce the experimentally determined N[triple bond]N infrared stretching frequencies and validate the computational methods. The electronic structures of the reduced cobalt dinitrogen complexes are evaluated in the broader context of bis(imino)pyridine base metal chemistry and the influence of the metal d electron configuration on the preference for closed-shell versus triplet diradical dianions.

Robust metal-organic framework enforced by triple-framework interpenetration exhibiting high H2 storage density.

A microporous metal-organic framework 1 Zn 2(CNC) 2(DPT).G [CNC = 4-Carboxycinnamic; DPT = 3,6-Di-4-pyridyl-1,2,4,5-tetrazine; G = guest molecules] was synthesized and structurally characterized by a triply interpenetrated primitive cubic net with 1D pores of about 3.7 A. 1 is highly robust enforced by triple framework interpenetration through weak van der Waals interactions, thus the activated 1b takes up 1.28 wt % hydrogen gas and exhibits high hydrogen storage density of 95.2% at 1 atm and 77 K.

Synthesis and Electronic Structure of Cationic, Neutral, and Anionic Bis(imino)pyridine Iron Alkyl Complexes: Evaluation of Redox Activity in Single-Component Ethylene Polymerization Catalysts

A family of cationic, neutral, and anionic bis(imino)pyridine iron alkyl complexes has been prepared, and their electronic and molecular structures have been established by a combination of X-ray diffraction, Mössbauer spectroscopy, magnetochemistry, and open-shell density functional theory. For the cationic complexes, [((iPr)PDI)Fe-R][BPh(4)] ((iPr)PDI = 2,6-(2,6-(i)Pr(2)-C(6)H(3)N═CMe)(2)C(5)H(3)N; R = CH(2)SiMe(3), CH(2)CMe(3), or CH(3)), which are known single-component ethylene polymerization catalysts, the data establish high spin ferrous compounds (S(Fe) = 2) with neutral, redox-innocent bis(imino)pyridine chelates. One-electron reduction to the corresponding neutral alkyls, ((iPr)PDI)Fe(CH(2)SiMe(3)) or ((iPr)PDI)Fe(CH(2)CMe(3)), is chelate-based, resulting in a bis(imino)pyridine radical anion (S(PDI) = 1/2) antiferromagnetically coupled to a high spin ferrous ion (S(Fe) = 2). The neutral neopentyl derivative was reduced by an additional electron and furnished the corresponding anion, [Li(Et(2)O)(3)][((iPr)PDI)Fe(CH(2)CMe(3))N(2)], with concomitant coordination of dinitrogen. The experimental and computational data establish that this S = 0 compound is best described as a low spin ferrous compound (S(Fe) = 0) with a closed-shell singlet bis(imino)pyridine dianion (S(PDI) = 0), demonstrating that the reduction is ligand-based. The change in field strength of the bis(imino)pyridine coupled with the placement of the alkyl ligand into the apical position of the molecule induced a spin state change at the iron center from high to low spin. The relevance of the compounds and their electronic structures to olefin polymerization catalysis is also presented.

Enantioselective Polymerization of Epoxides: A Highly Active and Selective Catalyst for the Preparation of Stereoregular Polyethers and Enantiopure Epoxides

A chiral, bimetallic cobalt catalyst was discovered that is highly active and enantioselective for epoxide polymerization. The enantiomerically pure catalyst system exhibits a stereoselectivity factor (s = k(fast)/k(slow)) of 370 for propylene oxide, allowing enantiomerically pure epoxide to be recovered in nearly the maximum theoretical yield. In addition, the racemic catalyst forms highly isotactic poly(propylene oxide) in quantitative yield. The catalyst is active and selective for other epoxides, such as 1-butene oxide, 1-hexene oxide, and styrene oxide.