Emma Woolliams

Metal (carbide)–carbon eutectics for thermometry and radiometry: a review of the first seven years

Since 1999, when the first high temperature fixed-points based on the metal–carbon eutectic phase transitions were realized, more than 60 papers have been published on this topic. Eutectic based fixed-points are already being considered as secondary reference points for the International Temperature Scale and have been introduced into industrial laboratories. This rapid progress has been possible through the combined effort of scientists around the world, from national metrology institutes, universities and industry. It has been proposed that these fixed-points should be officially adopted as a way to improve the realization and dissemination of temperature scales above the silver point. In radiometry, the availability of stable high temperature fixed-points will give greater flexibility and at some wavelengths the potential for greater accuracy for spectral radiance and irradiance scale realization. This paper summarizes the major progress in eutectic research so far.

Accurate radiometry from space: an essential tool for climate studies.

The Earths climate is undoubtedly changing; however, the time scale, consequences and causal attribution remain the subject of significant debate and uncertainty. Detection of subtle indicators from a background of natural variability requires measurements over a time base of decades. This places severe demands on the instrumentation used, requiring measurements of sufficient accuracy and sensitivity that can allow reliable judgements to be made decades apart. The International System of Units (SI) and the network of National Metrology Institutes were developed to address such requirements. However, ensuring and maintaining SI traceability of sufficient accuracy in instruments orbiting the Earth presents a significant new challenge to the metrology community. This paper highlights some key measurands and applications driving the uncertainty demand of the climate community in the solar reflective domain, e.g. solar irradiances and reflectances/radiances of the Earth. It discusses how meeting these uncertainties facilitate significant improvement in the forecasting abilities of climate models. After discussing the current state of the art, it describes a new satellite mission, called TRUTHS, which enables, for the first time, high-accuracy SI traceability to be established in orbit. The direct use of a ‘primary standard’ and replication of the terrestrial traceability chain extends the SI into space, in effect realizing a ‘metrology laboratory in space’.

Spectrometer bandwidth correction for generalized bandpass functions

The bandpass of spectrometers can cause appreciable errors when making radiometric measurements. This paper describes a practical method for correcting a set of equispaced measured values provided by a spectrometer with a finite bandwidth, an arbitrary bandpass function and at an arbitrary wavelength step. The paper reviews the limits of the approach for real spectra in the presence of measurement noise and suggests ways of reducing the effect of noise.

Thermodynamic temperature assignment to the point of inflection of the melting curve of high-temperature fixed points.

The thermodynamic temperature of the point of inflection of the melting transition of Re-C, Pt-C and Co-C eutectics has been determined to be 2747.84 ± 0.35 K, 2011.43 ± 0.18 K and 1597.39 ± 0.13 K, respectively, and the thermodynamic temperature of the freezing transition of Cu has been determined to be 1357.80 ± 0.08 K, where the ± symbol represents 95% coverage. These results are the best consensus estimates obtained from measurements made using various spectroradiometric primary thermometry techniques by nine different national metrology institutes. The good agreement between the institutes suggests that spectroradiometric thermometry techniques are sufficiently mature (at least in those institutes) to allow the direct realization of thermodynamic temperature above 1234 K (rather than the use of a temperature scale) and that metal-carbon eutectics can be used as high-temperature fixed points for thermodynamic temperature dissemination. The results directly support the developing mise en pratique for the definition of the kelvin to include direct measurement of thermodynamic temperature.

A Monte Carlo method for uncertainty evaluation implemented on a distributed computing system

This paper is concerned with bringing together the topics of uncertainty evaluation using a Monte Carlo method, distributed computing for data parallel applications and pseudo-random number generation. A study of a measurement system to estimate the absolute thermodynamic temperatures of two high-temperature blackbodies by measuring the ratios of their spectral radiances is used to illustrate the application of these topics. The uncertainties associated with the estimates of the temperatures are evaluated and used to inform the experimental realization of the system. The difficulties associated with determining model sensitivity coefficients, and demonstrating whether a linearization of the model is adequate, are avoided by using a Monte Carlo method as an approach to uncertainty evaluation. A distributed computing system is used to undertake the Monte Carlo calculation because the computational effort required to evaluate the measurement model can be significant. In order to ensure that the results provided by a Monte Carlo method implemented on a distributed computing system are reliable, consideration is given to the approach to generating pseudo-random numbers, which constitutes a key component of the Monte Carlo procedure.

Stray light correction for diode-array-based spectrometers using a monochromator.

Photodiode-array-based spectrometers are increasingly being used in a wide variety of applications. However, the signal measured by this type of instrument often is not what is anticipated by the user and is often subject to contamination from stray light. This paper describes an efficient and low-cost stray light correction approach based on a relatively simple system using a monochromator-based source. The paper further discusses the limitations of using a monochromator instead of a laser, as used by previous researchers, and its impact on the quality of the stray light correction. The reliability and robustness of the stray light correction matrix generated have been studied and are also reported.

Progress report for the CCT-WG5 high temperature fixed point research plan

An overview of the progress in High Temperature Fixed Point (HTFP) research conducted under the auspices of the CCT-WG5 research plan is reported. In brief highlights are: Provisional long term stability of HTFPs has been demonstrated. Optimum construction methods for HTFPs have been established and high quality HTFPs of Co-C, Pt-C and Re-C have been constructed for thermodynamic temperature assignment. The major sources of uncertainty in the assignment of thermodynamic temperature have been identified and quantified. The status of absolute radiometric temperature measurement has been quantified through the circulation of a set of HTFPs. The measurement campaign to assign low uncertainty thermodynamic temperatures to a selected set of HTFPs will begin in mid-2012. It is envisaged that this will be complete by 2015 leading to HTFPs becoming routine reference standards for radiometry and high temperature metrology.

Evaluation of spectral irradiance transfer standards

The performance of spectral irradiance transfer-standard lamps has long been a concern in the radiometry and photometry communities. The adoption of a modified FEL-type lamp has recently been proposed as the most suitable transfer standard for spectral irradiance measurements. While data have been published on the performance of these lamps when operated continuously and in a laboratory environment, however, little information is available on their performance under typical usage. The results are presented of real-life testing of over thirty FEL lamps both pre-selected, according to published procedures, and direct from the manufacturer. When operated vertically all of the lamps tested suffered terminal coil collapse after between 140 h and 250 h burn time. The reproducibility of the FEL lamps after transportation is also investigated.

Spectral radiance source based on supercontinuum laser and wavelength tunable bandpass filter: the spectrally tunable absolute irradiance and radiance source.

A new spectrally tunable source for calibration of radiometric detectors in radiance, irradiance, or power mode has been developed and characterized. It is termed the spectrally tunable absolute irradiance and radiance source (STAIRS). It consists of a supercontinuum laser, wavelength tunable bandpass filter, power stabilization feedback control scheme, and output coupling optics. It has the advantages of relative portability and a collimated beam (low étendue), and is an alternative to conventional sources such as tungsten lamps, blackbodies, or tunable lasers. The supercontinuum laser is a commercial Fianium SC400-6-02, which has a wavelength range between 400 and 2500 nm and a total power of 6 W. The wavelength tunable bandpass filter, a PhotonEtc laser line tunable filter (LLTF), is tunable between 400 and 1000 nm and has a bandwidth of 1 or 2 nm depending on the wavelength selected. The collimated laser beam from the LLTF filter is converted to an appropriate spatial and angular distribution for the application considered (i.e., for radiance, irradiance, or power mode calibration of a radiometric sensor) with the output coupling optics, for example, an integrating sphere, and the spectral radiance/irradiance/power of the source is measured using a calibration optical sensor. A power stabilization feedback control scheme has been incorporated that stabilizes the source to better than 0.01% for averaging times longer than 100 s. The out-of-band transmission of the LLTF filter is estimated to be < -65 dB (0.00003%), and is sufficiently low for many end-user applications, for example the spectral radiance calibration of earth observation imaging radiometers and the stray light characterization of array spectrometers (the end-user optical sensor). We have made initial measurements of two end-user instruments with the STAIRS source, an array spectrometer and ocean color radiometer.

Preliminary results of the investigation of a 3500 K black body

A new ultra-high-temperature black body designed and constructed at the All-Russian Research Institute for Optophysical Measurements (VNIIOFI, Russian Federation) has recently been delivered to the National Physical Laboratory (NPL, UK). The black-body cavity consists of a series of pyrolytic-graphite rings and is designed to operate at temperatures of up to 3500 K. Preliminary results show that the cavity uniformity varies with operating temperature and change in shape of cavity bottom. Results of active and passive temperature control are also given.